Topcem Pronto flooring system pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Flooring SystemNo. 12 / 24

Topcem Pronto Technical Data Sheet (TDS)

Flooring System to C30-F6.

Supplied pre-blended rather than batched on site, Topcem Pronto removes the main variable in screeding, which is the aggregate grading and binder dosage a gang judges by eye. It is a ready mixed screed mortar with high thermal conductivity, making it the grade to specify over underfloor heating where the heat should reach the floor covering rather than sit in the screed.

  • High thermal conductivity heated screeds
  • Bonded and unbonded screeds on new and existing slabs
  • Quick drying screeds before wood and resilient flooring
  • Screeds before ceramic tiles and natural stone
  • Repairing screeds in shops, offices and residences
Data sheet1.2 MB

Build a list across products and send it once, or ask about Topcem Pronto on WhatsApp now.

Class
C30-F6
Consumption
1.8 to 2 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 00209

About Topcem Pronto

Classified C30 F6, with compressive strength to EN 13892-1 at C30 and flexural strength at F6, it is a load bearing levelling layer beneath a covering and not a finished surface. Consumption is about 18 to 20 kg/m² per centimetre of thickness depending on the degree of compaction, from 25 kg bags of grey powder. Order by area and depth together, because at screed thickness the bag count climbs quickly and a part delivery stalls the pour.

Documentation

Related documentation

  • Technical data sheet

    1.2 MB · PDF

    Topcem Pronto as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 80 mm.

As published in the data sheet

3,600 to 4,000kg

  • 1.8 to 2 kg/m2 per mm
  • 40 mm thick
  • over 50 m2

Order 144 to 160 packs of 25 kg bag

Send this quantity for a quote

Taken from the Topcem Pronto data sheet: CONSUMPTION: the consumption of Topcem Pronto is about 18 to 20 kg/m2 per cm thickness depending on the compaction degree. No site allowance is added unless you turn one on. 18 to 20 kg/m2 per cm is 1.8 to 2.0 kg/m2 per mm, and where in that range a job lands depends on how hard the screed is compacted. This is a ready mixed screed, so unlike Topcem no aggregate is added. The sheet's printed build ups run from 10 to 80 mm, bonded 30 to 80 mm, unbonded 35 to 80 mm, with at least 3 cm over the pipes of a heated screed.

Application

Where it is used.

  1. 01High thermal conductivity heated screeds
  2. 02Bonded and unbonded screeds on new and existing slabs
  3. 03Quick drying screeds before wood and resilient flooring
  4. 04Screeds before ceramic tiles and natural stone
  5. 05Repairing screeds in shops, offices and residences

Specification

Technical data.

  • C30-F6
  • EN 13813
Topcem Pronto technical specifications from the manufacturer TDS
ClassificationC30-F6
CoverageThe consumption of Topcem Pronto is about 18-20 kg/m² per cm thickness depending on the compaction degree.
Pack size25 kg
Coloursgrey
Consistencypowder
Storage and shelf lifeTopcem Pronto stored in a dry place is stable for at least 12 months.
Density2,100 kg/m³ depending on the compaction degree
Compressive strengthclass: EN 13892-1 ≥ C5 C30
Flexural strengthclass: EN 13892-1 ≥ F1 F6

Typical values as Mapei prints them in the data sheet for Topcem Pronto. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Topcem Pronto stored in a dry place is stable for at least 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Topcem Pronto, a flooring system manufactured by Mapei, classified C30-F6. Allow 1.8 to 2 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Topcem Pronto
ProductTopcem Pronto
ManufacturerMapei
TypeFlooring System
ClassificationC30-F6
Consumption1.8 to 2 kg/m2 per mm
Pack size25 kg
Unit of measurementm2

Frequently Asked Questions

Topcem Pronto is classified C30-F6 according to EN 13813, as stated in the manufacturer's technical data sheet.

As per the TDS: The consumption of Topcem Pronto is about 18-20 kg/m² per cm thickness depending on the compaction degree.

25 kg

You can download the official Topcem Pronto technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Topcem Pronto in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Topcem Pronto you need, or describe the job and we will work it out with you.

Chat on WhatsApp