
Mapei PrimerNo. 13 / 24
Triblock P Technical Data Sheet (TDS)
Mapei primer.
Triblock P is the three component epoxy cementitious primer Mapei publishes for substrates that are still damp. Two liquids and a powder are mixed 12 : 38 : 50 by weight, and the mix reticulates on damp and on very smooth surfaces, old ceramic, porcelain and marble included, bonding at over 3 MPa to concrete and over 3.5 MPa to ceramic.
- Old ceramic or terrazzo floors on substrates with excessive residual humidity
- Compact cementitious substrates too damp for wooden, resilient and resin floors
- Damp concrete before epoxy protective and anti-corrosion products or polyurethane dressings
- Dressing concrete channels, drains and pipe-work
- Smoothing uneven concrete when gauged 1 : 0.5 by weight with 0.25 Quartz or 0.5 Quartz sand
- Filling cracks not subject to movement, opened out to a V
Build a list across products and send it once, or ask about Triblock P on WhatsApp now.
- Consumption
- 0.5 to 1 kg/m² over 2 coats
- Pack we stock
- 5 kg
- Colour
- White
Mapei document 02043
About Triblock P
Residual humidity is what decides it. Where a screed has dried out, a water dispersion primer such as Primer G does the same job for a fraction of the cost; Triblock P earns its price only where moisture is still in the slab or an old tiled floor has to stay down. Two criss cross coats, 4 to 6 hours apart, then flooring after 24 hours and within 7 days. It is rigid, so never over a crack that moves.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Triblock P as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
Coats, applied criss-cross 4 to 6 hours apart
The sheet calls for 2 to 3.
As published in the data sheet
40.0 to 50.0kg
- Absorbent surfaces, per coat: 0.4 to 0.5 kg/m2
- 2 coats
- over 50 m2
Order 8 to 10 packs of 5 kg kit (A + B + C)
Taken from the Triblock P data sheet: CONSUMPTION: 250-300 g/m2 per coat on non-absorbent surfaces; 400-500 g/m2 per coat on absorbent surfaces. The sheet quotes grammes, divided by a thousand here to give kilogrammes. No site allowance is added unless you turn one on. The sheet asks for two criss-cross coats, which is the default here. A third coat is only for the case where Triblock P has been used to smooth over and the substrate is still very damp. The third printed consumption line, 1.5 kg/m2 per mm of thickness, is for the trowelled smoothing mortar made by gauging Triblock P 1 : 0.5 by weight with 0.25 Quartz or 0.5 Quartz sand, which is a different operation and is not what this calculator quotes. The kit is 5 kg of mixed product, so the pack count is kits and the three components can only be mixed whole, 12 : 38 : 50 by weight.
Application
Where it is used.
- 01Old ceramic or terrazzo floors on substrates with excessive residual humidity
- 02Compact cementitious substrates too damp for wooden, resilient and resin floors
- 03Damp concrete before epoxy protective and anti-corrosion products or polyurethane dressings
- 04Dressing concrete channels, drains and pipe-work
- 05Smoothing uneven concrete when gauged 1 : 0.5 by weight with 0.25 Quartz or 0.5 Quartz sand
- 06Filling cracks not subject to movement, opened out to a V
Specification
Technical data.
| Coverage | 250-300 g/m2 per coat on non-absorbent surfaces; 400-500 g/m2 per coat on absorbent surfaces; 1.5 kg/m2 per mm of thickness for smoothing |
|---|---|
| Pack size | 5 kg kits (A + B + C): component A 0.6 kg, component B 1.9 kg, component C 2.5 kg |
| Pot life | from 30 to 40 minutes at +23C |
| Colours | White |
| Mixing ratio | comp. A : comp. B : comp. C = 12 : 38 : 50 in weight |
| Application temperature | from +5C to +35C |
| Consistency | paste |
| Storage and shelf life | 12 months in its original, closed containers, protected against frost and stored at a temperature of at least 5C |
| Dilution | Brush 5-10% water, roller 10-15%, spray maximum 20% |
| Density of mix | 1,800 kg/m3 |
| Dry to touch | after approx. 4-6 hours |
| Waiting time between coats | 4-6 hours |
| Set to light foot traffic | 24 hours |
| Waiting time before further applications | from a minimum of 24 hours up to a maximum of 7 days |
| Final setting time | 7 days |
| Bonding to concrete | > 3 MPa (failure of concrete) |
| Bonding to ceramic | > 3.5 MPa (failure of the ceramic) |
| In service temperature | from -35C to +100C |
| Dry solids content | comp. A 63 %, comp. B 48.5 %, comp. C 100 % |
Typical values as Mapei prints them in the data sheet for Triblock P. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg kits (A + B + C): component A 0.6 kg, component B 1.9 kg, component C 2.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
comp. A : comp. B : comp. C = 12 : 38 : 50 in weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
from 30 to 40 minutes at +23C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in its original, closed containers, protected against frost and stored at a temperature of at least 5C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Triblock P, a primer manufactured by Mapei. Allow 0.5 to 1 kg/m2 over 2 coats, as published by the manufacturer. Mix at comp. A : comp. B : comp. C = 12 : 38 : 50 in weight. Supplied in 5 kg kits (a + b + c): component a 0.6 kg, component b 1.9 kg, component c 2.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Triblock P |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.5 to 1 kg/m2 over 2 coats |
| Pack size | 5 kg kits (A + B + C): component A 0.6 kg, component B 1.9 kg, component C 2.5 kg |
| Mixing ratio | comp. A : comp. B : comp. C = 12 : 38 : 50 in weight |
| Pot life | from 30 to 40 minutes at +23C |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 250-300 g/m2 per coat on non-absorbent surfaces; 400-500 g/m2 per coat on absorbent surfaces; 1.5 kg/m2 per mm of thickness for smoothing
5 kg kits (A + B + C): component A 0.6 kg, component B 1.9 kg, component C 2.5 kg
You can download the official Triblock P technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
Triblock P in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Triblock P you need, or describe the job and we will work it out with you.

