
Mapei Self LevellingNo. 14 / 24
Ultraplan Technical Data Sheet (TDS)
Self Levelling to CT-C30-F7.
Ultraplan is the self levelling smoothing compound to reach for when the build up has to begin thin: 1 to 10 mm per layer, fibre reinforced and ultra rapid hardening. It is a levelling layer beneath a covering, taking ceramic, natural stone, resilient and wooden floors, and it suits areas carrying wheeled loads such as trolleys and office chairs, which is why hospitals, hotels, schools and shopping centres are its usual home.
- Levelling concrete slabs and cementitious screeds
- Levelling anhydrite substrates
- Levelling over underfloor heating and cooling systems
- Levelling existing terrazzo, ceramic and natural stone floors
- Preparation before ceramic, resilient and wooden flooring
- Hospitals, hotels, theatres, schools and shopping centres
Build a list across products and send it once, or ask about Ultraplan on WhatsApp now.
- Class
- CT-C30-F7
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 23 kg
- Colour
- Grey
Mapei document 00501 · revision 10-2026
About Ultraplan
Classified CT C30 F7 and rated EC1 Plus, it mixes at 25 to 26 parts water per 100 parts powder, gives 20 to 30 minutes of pot life and sets after about three hours. Coverage is 1.6 kg/m² per mm from 23 kg bags. It is interior only, so keep it off UAE balconies and terraces however sheltered they look.
Documentation
Related documentation
Technical data sheet
Revision 10-2026 · 1.3 MB · PDF
Ultraplan as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
240kg
- 1.6 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 11 packs of 23 kg bag
Taken from the Ultraplan data sheet: CONSUMPTION: 1.6 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness per layer, from 1 to 10 mm. The 3 mm default is a realistic levelling pass, and the sheet asks for at least 3 mm where wood is to be overlaid.
Application
Where it is used.
- 01Levelling concrete slabs and cementitious screeds
- 02Levelling anhydrite substrates
- 03Levelling over underfloor heating and cooling systems
- 04Levelling existing terrazzo, ceramic and natural stone floors
- 05Preparation before ceramic, resilient and wooden flooring
- 06Hospitals, hotels, theatres, schools and shopping centres
Specification
Technical data.
- CT-C30-F7
- EN 13813
- EMICODE EC1 Plus - very low emission
| Classification | CT-C30-F7 |
|---|---|
| Coverage | 1.6 kg/m² per mm of thickness. |
| Pack size | 23 kg |
| Pot life | 20-30 minutes |
| Set to light foot traffic | after 3 h |
| Colours | Grey |
| Mixing ratio | 25-26 parts water per 100 parts by weight of Ultraplan |
| Application temperature | from +5°C to +40°C |
| Consistency | fine powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Ultraplan has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. |
| EMICODE | EC1 Plus - very low emission |
| Thickness | per layer: from 1 to 10 mm |
| Density | 1300 kg/m³ |
| Dry solids | 100% |
| Ph | approx. 12 |
Typical values as Mapei prints them in the data sheet for Ultraplan. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
23 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
25-26 parts water per 100 parts by weight of Ultraplan. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
20-30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Ultraplan has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultraplan, a self levelling manufactured by Mapei, classified CT-C30-F7. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Applied thickness per layer: from 1 to 10 mm. Mix at 25-26 parts water per 100 parts by weight of Ultraplan. Supplied in 23 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultraplan |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | CT-C30-F7 |
| Consumption | 1.6 kg/m2 per mm |
| Thickness | per layer: from 1 to 10 mm |
| Pack size | 23 kg |
| Mixing ratio | 25-26 parts water per 100 parts by weight of Ultraplan |
| Set time | after 3 h |
| Pot life | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultraplan is classified CT-C30-F7 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.6 kg/m² per mm of thickness.
23 kg
You can download the official Ultraplan technical data sheet as a PDF directly from this page, revision 10-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Ultraplan in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultraplan you need, or describe the job and we will work it out with you.