Ultraplan Contract self levelling pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Self LevellingNo. 15 / 24

Ultraplan Contract Technical Data Sheet (TDS)

Self Levelling to EN 13813 C30 F6 A1.

Sized for volume work, Ultraplan Contract is a self levelling smoothing compound for 1 to 10 mm per coat, the same thin build up as Ultraplan but formulated for the large site and for pumped application over long distances. It prepares new and existing substrates to receive any floor covering where resistance to loads and traffic is required, so it stays a levelling layer rather than a wearing surface.

  • Levelling large floor areas by pressure pump
  • Levelling concrete slabs and cementitious screeds
  • Levelling anhydrite substrates
  • Levelling over underfloor heating systems
  • Levelling existing terrazzo, ceramic and natural stone floors
  • Interiors in the shipbuilding industry
Data sheet2.2 MB

Build a list across products and send it once, or ask about Ultraplan Contract on WhatsApp now.

Class
EN 13813 C30 F6 A1
Consumption
1.7 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 04085 · revision 2-2023

About Ultraplan Contract

A 25 kg bag takes 20 to 21 per cent water, about 5 to 5.25 litres, gives 20 to 35 minutes of workability and sets in a minimum of three hours, at 1.7 kg/m² per mm of thickness. Classified EN 13813 C30 F6 A1 and applied from +5°C to +40°C. On a large UAE pour, plan the mixing station and pump run first, because wet edges have to meet.

Documentation

Related documentation

  • Technical data sheet

    Revision 2-2023 · 2.2 MB · PDF

    Ultraplan Contract as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 10 mm.

As published in the data sheet

255kg

  • 1.7 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 11 packs of 25 kg bag

Send this quantity for a quote

Taken from the Ultraplan Contract data sheet: CONSUMPTION: 1.7 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness per coat, 1 to 10 mm per coat. The sheet asks for at least 3 mm where wooden flooring is to be installed.

Application

Where it is used.

  1. 01Levelling large floor areas by pressure pump
  2. 02Levelling concrete slabs and cementitious screeds
  3. 03Levelling anhydrite substrates
  4. 04Levelling over underfloor heating systems
  5. 05Levelling existing terrazzo, ceramic and natural stone floors
  6. 06Interiors in the shipbuilding industry

Specification

Technical data.

  • EN 13813 C30 F6 A1
  • EN 13813
Ultraplan Contract technical specifications from the manufacturer TDS
ClassificationEN 13813 C30 F6 A1
Coverage1.7 kg/m² per mm of thickness.
Pack size25 kg
Pot life20-35 min
Set to light foot trafficmin. 3 h
Coloursgrey
Mixing ratio(with water):` 20-21%, - 5-5.25 L per bag
Application temperaturefrom +5°C to +40°C
Consistencyfine powder
Storage and shelf lifeUltraplan Contract in its original unopened packaging and in a dry place, can be stored for 12 months.
Thicknessper coat: 1-10 mm per coat
Dry solids100%
Ph12

Typical values as Mapei prints them in the data sheet for Ultraplan Contract. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

(with water):` 20-21%, - 5-5.25 L per bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

20-35 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Ultraplan Contract in its original unopened packaging and in a dry place, can be stored for 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultraplan Contract, a self levelling manufactured by Mapei, classified EN 13813 C30 F6 A1. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Applied thickness per coat: 1-10 mm per coat. Mix at (with water):` 20-21%, - 5-5.25 L per bag. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultraplan Contract
ProductUltraplan Contract
ManufacturerMapei
TypeSelf Levelling
ClassificationEN 13813 C30 F6 A1
Consumption1.7 kg/m2 per mm
Thicknessper coat: 1-10 mm per coat
Pack size25 kg
Mixing ratio(with water):` 20-21%, - 5-5.25 L per bag
Set timemin. 3 h
Pot life20-35 min
Unit of measurementm2

Frequently Asked Questions

Ultraplan Contract is classified EN 13813 C30 F6 A1 according to EN 13813, as stated in the manufacturer's technical data sheet.

As per the TDS: 1.7 kg/m² per mm of thickness.

25 kg

You can download the official Ultraplan Contract technical data sheet as a PDF directly from this page, revision 2-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultraplan Contract in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultraplan Contract you need, or describe the job and we will work it out with you.

Chat on WhatsApp