
Mapei Self LevellingNo. 16 / 24
Ultraplan Eco 20 Technical Data Sheet (TDS)
Self Levelling to EXT EN 13813 CT C30 F7 A2FL S1.
Depth is the first question with a smoothing compound, and this one answers it in layers. Ultraplan Eco 20 takes 1 to 10 mm in a single pour, and the sheet allows up to 20 mm only if about 30 per cent by weight of 0.5 mm graded sand goes into the mix.
- levelling and smoothing interior substrates from 1 to 10 mm
- preparing a substrate before ceramic, resilient, carpet or wood
- levelling anhydrite substrates after a suitable primer
- areas carrying wheeled service loads, at a minimum 3 mm
- smoothing over existing ceramic or natural stone once primed
- refurbishment where a ceramic covering follows the same day
Build a list across products and send it once, or ask about Ultraplan Eco 20 on WhatsApp now.
- Class
- EXT EN 13813 CT C30 F7 A2FL S1
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 23 kg
- Colour
- grey
Mapei document 04005 · revision 10-2026
About Ultraplan Eco 20
A 23 kg bag needs 5.5 to 5.75 litres of clean water, left to stand two to three minutes and then re-stirred. A second layer can go straight onto the first while it is still only set to light foot traffic, roughly three hours at +23C. Once the first has dried out it has to be abraded and primed again. Ceramic follows after three hours, resilient and carpet after twenty four, wood after forty eight. On a UAE slab, read that moisture with a carbide hygrometer rather than trusting the clock.
Documentation
Related documentation
Technical data sheet
Revision 10-2026 · 1.0 MB · PDF
Ultraplan Eco 20 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
240kg
- 1.6 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 11 packs of 23 kg bag
Taken from the Ultraplan Eco 20 data sheet: CONSUMPTION: 1.6 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness per layer, from 1 to 10 mm. The sheet recommends a minimum of 3 mm for areas subject to wheeled service loads.
Application
Where it is used.
- 01levelling and smoothing interior substrates from 1 to 10 mm
- 02preparing a substrate before ceramic, resilient, carpet or wood
- 03levelling anhydrite substrates after a suitable primer
- 04areas carrying wheeled service loads, at a minimum 3 mm
- 05smoothing over existing ceramic or natural stone once primed
- 06refurbishment where a ceramic covering follows the same day
Specification
Technical data.
- EXT EN 13813 CT C30 F7 A2FL S1
- EN 13813
- EMICODE EC1 Plus - very low emission
| Classification | EXT EN 13813 CT C30 F7 A2FL S1 |
|---|---|
| Coverage | 1.6 kg/m² per mm of thickness. |
| Pack size | 23 kg |
| Pot life | 20-30 minutes |
| Set to light foot traffic | min. 3 h |
| Colours | grey |
| Mixing ratio | 24-25 parts of water per 100 parts by weight |
| Application temperature | from +5°C to +40°C |
| Consistency | fine powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Ultraplan EC20 has a shelf life of 12 months. If stored at high temperatures and/or high humidity conditions, the shelf life may be reduced. A longer storage period could determine a slower setting time for Ultraplan EC20. However, the pe |
| EMICODE | EC1 Plus - very low emission |
| Thickness | per layer: from 1 to 10 mm |
| Density | 1300 kg/m³ |
| Dry solids | 100% |
| Ph | approx. 12 |
Typical values as Mapei prints them in the data sheet for Ultraplan Eco 20. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
23 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
24-25 parts of water per 100 parts by weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
20-30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Ultraplan EC20 has a shelf life of 12 months. If stored at high temperatures and/or high humidity conditions, the shelf life may be reduced. A longer storage period could determine a slower setting time for Ultraplan EC20. However, the pe in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultraplan Eco 20, a self levelling manufactured by Mapei, classified EXT EN 13813 CT C30 F7 A2FL S1. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Applied thickness per layer: from 1 to 10 mm. Mix at 24-25 parts of water per 100 parts by weight. Supplied in 23 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultraplan Eco 20 |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | EXT EN 13813 CT C30 F7 A2FL S1 |
| Consumption | 1.6 kg/m2 per mm |
| Thickness | per layer: from 1 to 10 mm |
| Pack size | 23 kg |
| Mixing ratio | 24-25 parts of water per 100 parts by weight |
| Set time | min. 3 h |
| Pot life | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultraplan Eco 20 is classified EXT EN 13813 CT C30 F7 A2FL S1 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.6 kg/m² per mm of thickness.
23 kg
You can download the official Ultraplan Eco 20 technical data sheet as a PDF directly from this page, revision 10-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Ultraplan Eco 20 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultraplan Eco 20 you need, or describe the job and we will work it out with you.