
Mapei Self LevellingNo. 17 / 24
Ultraplan Maxi Technical Data Sheet (TDS)
Self Levelling to CT-C35-F7.
When a slab sits further out of level than a thin compound can correct, Ultraplan Maxi covers 3 to 40 mm per layer, the widest single layer range in this group. The lower limit matters as much as the upper one: it cannot be feathered out, so a floor needing a 1 mm correction wants Ultraplan instead.
- Levelling screeds before ceramic and natural stone tiles
- Levelling before PVC, linoleum, rubber and cork flooring
- Levelling before wood and textile flooring
- Levelling anhydrite substrates
- Levelling underfloor heating and cooling systems
- Hospitals, hotels, theatres, schools and shopping centres
Build a list across products and send it once, or ask about Ultraplan Maxi on WhatsApp now.
- Class
- CT-C35-F7
- Consumption
- 1.7 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 00510 · revision 8-2026
About Ultraplan Maxi
It is a levelling layer under ceramic, stone, resilient and wooden coverings, suits wheeled service loads and works over underfloor heating and cooling. Classified CT C35 F7 and rated EC1 Plus, it mixes at roughly 18 to 19 parts water per 100 parts powder, offers 30 to 40 minutes of pot life and sets after three to twelve hours depending on thickness. Coverage is 1.7 kg/m² per mm from 25 kg bags. Interior use only, applied between +5°C and +40°C.
Documentation
Related documentation
Technical data sheet
Revision 8-2026 · 1.1 MB · PDF
Ultraplan Maxi as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 3 to 40 mm.
As published in the data sheet
850kg
- 1.7 kg/m2 per mm
- 10 mm thick
- over 50 m2
Order 34 packs of 25 kg bag
Taken from the Ultraplan Maxi data sheet: CONSUMPTION: 1.7 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness per layer, from 3 to 40 mm. The 10 mm default is a realistic single pass within that range.
Application
Where it is used.
- 01Levelling screeds before ceramic and natural stone tiles
- 02Levelling before PVC, linoleum, rubber and cork flooring
- 03Levelling before wood and textile flooring
- 04Levelling anhydrite substrates
- 05Levelling underfloor heating and cooling systems
- 06Hospitals, hotels, theatres, schools and shopping centres
Specification
Technical data.
- CT-C35-F7
- EN 13813
- EMICODE EC1 Plus - very low emission
| Classification | CT-C35-F7 |
|---|---|
| Coverage | 1.7 kg/m² per mm of thickness. |
| Pack size | 25 kg |
| Pot life | 30-40 minutes |
| Set to light foot traffic | after 3-12 hours |
| Colours | grey |
| Mixing ratio | approx. 18-19 parts of water per 100 parts by weight of |
| Application temperature | from +5°C to +40°C |
| Consistency | fine powder |
| Storage and shelf life | Unopened packs of Ultraplan Maxi, stored in a dry place, are stable for at least 12 months. Longer storage (over 12 months) could result in a slower setting time of Ultraplan Maxi. However, the performances of the levelling layer at longer ages are not significantly modified. |
| EMICODE | EC1 Plus - very low emission |
| Thickness | per layer: from 3 to 40 mm |
| Density | 1300 kg/m³ |
| Dry solids | 100% |
| Ph | approx. 12 |
Typical values as Mapei prints them in the data sheet for Ultraplan Maxi. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
approx. 18-19 parts of water per 100 parts by weight of. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30-40 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Unopened packs of Ultraplan Maxi, stored in a dry place, are stable for at least 12 months. Longer storage (over 12 months) could result in a slower setting time of Ultraplan Maxi. However, the performances of the levelling layer at longer ages are not significantly modified. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultraplan Maxi, a self levelling manufactured by Mapei, classified CT-C35-F7. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Applied thickness per layer: from 3 to 40 mm. Mix at approx. 18-19 parts of water per 100 parts by weight of. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultraplan Maxi |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | CT-C35-F7 |
| Consumption | 1.7 kg/m2 per mm |
| Thickness | per layer: from 3 to 40 mm |
| Pack size | 25 kg |
| Mixing ratio | approx. 18-19 parts of water per 100 parts by weight of |
| Set time | after 3-12 hours |
| Pot life | 30-40 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultraplan Maxi is classified CT-C35-F7 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.7 kg/m² per mm of thickness.
25 kg
You can download the official Ultraplan Maxi technical data sheet as a PDF directly from this page, revision 8-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Ultraplan Maxi in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultraplan Maxi you need, or describe the job and we will work it out with you.