Ultraplan Trade self levelling pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Self LevellingNo. 18 / 24

Ultraplan Trade Technical Data Sheet (TDS)

Self Levelling to EN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb.

Ultraplan Trade handles 3 to 40 mm per coat and is set apart within the range by its thermal conductivity rating to EN 12664-1, which makes it the choice over heated screeds where the aim is to move heat into the floor covering rather than store it in the levelling layer. Like the rest of the Ultraplan family it is a levelling layer beneath a covering and not a finished floor, and it is for interior use only.

  • Levelling layers for heated screeds
  • Levelling concrete slabs and cementitious screeds
  • Levelling anhydrite substrates
  • Levelling existing terrazzo, ceramic and natural stone floors
  • Preparation before all types of flooring
Data sheet1.9 MB

Build a list across products and send it once, or ask about Ultraplan Trade on WhatsApp now.

Class
EN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb
Consumption
1.75 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 04079 · revision 2-2023

About Ultraplan Trade

Setting takes three to twelve hours depending on thickness, coverage is 1.75 kg/m² per mm from 25 kg bags of grey fine powder, and it is rated EC1 Plus and classified EN 13813 C25 F6 A1, applied from +5°C to +40°C. Where UAE villas run underfloor cooling rather than heating, the same conductivity argument applies in reverse.

Documentation

Related documentation

  • Technical data sheet

    Revision 2-2023 · 1.9 MB · PDF

    Ultraplan Trade as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 3 to 40 mm.

As published in the data sheet

875kg

  • 1.75 kg/m2 per mm
  • 10 mm thick
  • over 50 m2

Order 35 packs of 25 kg bag

Send this quantity for a quote

Taken from the Ultraplan Trade data sheet: CONSUMPTION: 1.75 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness applicable per coat, 3 to 40 mm per coat. The 10 mm default is a realistic single pass within that range.

Application

Where it is used.

  1. 01Levelling layers for heated screeds
  2. 02Levelling concrete slabs and cementitious screeds
  3. 03Levelling anhydrite substrates
  4. 04Levelling existing terrazzo, ceramic and natural stone floors
  5. 05Preparation before all types of flooring

Specification

Technical data.

  • EN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb
  • EN 13813
  • EMICODE EC1 Plus - very low emission
Ultraplan Trade technical specifications from the manufacturer TDS
ClassificationEN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb
Coverage1.75 kg/m² per mm of thickness.
Pack size25 kg
Set to light foot traffic3-12 h
Coloursgrey
Application temperaturefrom +5°C to +40°C
Consistencyfine powder
Storage and shelf lifeUltraplan Trade stored in a dry place is stable for at least 12 months. However, with time it could undergo a slower setting time but the final characteristics do not alter.
EMICODEEC1 Plus - very low emission
Thicknessapplicable per coat: 3 to 40 mm per coat
Dry solids100%
Ph11

Typical values as Mapei prints them in the data sheet for Ultraplan Trade. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Ultraplan Trade stored in a dry place is stable for at least 12 months. However, with time it could undergo a slower setting time but the final characteristics do not alter. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultraplan Trade, a self levelling manufactured by Mapei, classified EN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb. Allow 1.75 kg/m2 per mm, as published by the manufacturer. Applied thickness applicable per coat: 3 to 40 mm per coat. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultraplan Trade
ProductUltraplan Trade
ManufacturerMapei
TypeSelf Levelling
ClassificationEN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb
Consumption1.75 kg/m2 per mm
Thicknessapplicable per coat: 3 to 40 mm per coat
Pack size25 kg
Set time3-12 h
Unit of measurementm2

Frequently Asked Questions

Ultraplan Trade is classified EN 13813 C25 F6 A1, THERMAL CONDUCTIVITY EN 12664-1 5_gb according to EN 13813, as stated in the manufacturer's technical data sheet.

As per the TDS: 1.75 kg/m² per mm of thickness.

25 kg

You can download the official Ultraplan Trade technical data sheet as a PDF directly from this page, revision 2-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultraplan Trade in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultraplan Trade you need, or describe the job and we will work it out with you.

Chat on WhatsApp