
Mapei Self LevellingNo. 19 / 24
Ultratop Technical Data Sheet (TDS)
Self Levelling to EN 13813 C40 F10 A9 A2FL S1.
Unlike the Ultraplan grades, Ultratop is allowed to stay visible. It is an ultra fast setting self levelling mortar for abrasion resistant floors from 5 to 40 mm thick, strong enough to be left exposed as the finished wearing surface in shopping centres, offices, shops and showrooms, including areas taking rubber tyred traffic.
- Exposed abrasion resistant floors in shopping centres and shops
- New floors in supermarkets, restaurants and showrooms
- Polished floors in offices, museums and apartments
- Terrazzo alla veneziana floors with natural aggregate
- Industrial floors later protected with epoxy coatings
- Levelling concrete, terrazzo, ceramic and stone substrates
Build a list across products and send it once, or ask about Ultratop on WhatsApp now.
- Class
- EN 13813 C40 F10 A9 A2FL S1
- Consumption
- 1.65 to 1.75 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- Anthracite, Beige Rose, Coffee, Concrete Grey, Extra White, Light Ivory, Platinum Grey, Signal Black
Mapei document 00517 · revision 12-2018
About Ultratop
It can be dry polished with diamond discs for a reflective finish, or combined with natural aggregate for a terrazzo alla veneziana effect. Classified EN 13813 C40 F10 A9 A2FL S1 with bond strength above 1.5 N/mm², it comes in eight colours from Extra White to Signal Black, mixes at 20 to 22 parts water per 100 parts powder and gives 15 minutes of pot life. Consumption is 16.5 to 17.5 kg/m² per centimetre. Fifteen minutes is short in UAE heat, so staff the pour properly.
Documentation
Related documentation
Technical data sheet
Revision 12-2018 · 5.4 MB · PDF
Ultratop as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 5 to 40 mm.
As published in the data sheet
825 to 875kg
- 1.65 to 1.75 kg/m2 per mm
- 10 mm thick
- over 50 m2
Order 33 to 35 packs of 25 kg bag
Taken from the Ultratop data sheet: CONSUMPTION: Ultratop used pure, 16.5 to 17.5 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Printed thickness is 5 to 40 mm, and 10 to 40 mm if the floor is to be polished. The figure is for Ultratop used pure, without added aggregate.
Application
Where it is used.
- 01Exposed abrasion resistant floors in shopping centres and shops
- 02New floors in supermarkets, restaurants and showrooms
- 03Polished floors in offices, museums and apartments
- 04Terrazzo alla veneziana floors with natural aggregate
- 05Industrial floors later protected with epoxy coatings
- 06Levelling concrete, terrazzo, ceramic and stone substrates
Specification
Technical data.
- EN 13813 C40 F10 A9 A2FL S1
- EN 13813
- EMICODE EC1 R PLUS - very low emission
| Classification | EN 13813 C40 F10 A9 A2FL S1 |
|---|---|
| Coverage | Ultratop used pure: 16.5-17.5 kg/m² per cm of thickness. |
| Pack size | 25 kg |
| Pot life | 15 minutes |
| Set to light foot traffic | 3-4 hours |
| Colours | Anthracite, Beige Rose, Coffee, Concrete Grey, Extra White, Light Ivory, Platinum Grey, Signal Black |
| Mixing ratio | approx. 20-22 parts water per 100 parts by weight of |
| Bond strength | EN 13892-8 > 1.5 N/mm² |
| Application temperature | from +5°C to +35°C |
| Consistency | fine powder |
| Storage and shelf life | Ultratop remains stable for 12 months if stored in a cool dry place. If stored for longer periods, the setting time of Ultratop may increase but without affecting its final characteristics. Preparation of the substrate by shot- blasting Preparation of the product with a drill Preparation of Ultratop |
| EMICODE | EC1 R PLUS - very low emission |
| Thickness | (mm): from 5 to 40 |
| Ph | approx. 12 |
| Density | 1300 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Ultratop. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
approx. 20-22 parts water per 100 parts by weight of. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
15 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Ultratop remains stable for 12 months if stored in a cool dry place. If stored for longer periods, the setting time of Ultratop may increase but without affecting its final characteristics. Preparation of the substrate by shot- blasting Preparation of the product with a drill Preparation of Ultratop in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultratop, a self levelling manufactured by Mapei, classified EN 13813 C40 F10 A9 A2FL S1. Allow 1.65 to 1.75 kg/m2 per mm, as published by the manufacturer. Applied thickness (mm): from 5 to 40. Mix at approx. 20-22 parts water per 100 parts by weight of. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultratop |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | EN 13813 C40 F10 A9 A2FL S1 |
| Consumption | 1.65 to 1.75 kg/m2 per mm |
| Thickness | (mm): from 5 to 40 |
| Pack size | 25 kg |
| Mixing ratio | approx. 20-22 parts water per 100 parts by weight of |
| Set time | 3-4 hours |
| Pot life | 15 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultratop is classified EN 13813 C40 F10 A9 A2FL S1 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: Ultratop used pure: 16.5-17.5 kg/m² per cm of thickness.
25 kg
You can download the official Ultratop technical data sheet as a PDF directly from this page, revision 12-2018, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Ultratop in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultratop you need, or describe the job and we will work it out with you.