Kerapoxy Easy Design epoxy grout pack
Mapei's own picture. The pack we stock: 3 kg.

Mapei Epoxy GroutNo. 19 / 54

Kerapoxy Easy Design Technical Data Sheet (TDS)

Epoxy Grout to RG.

Kerapoxy Easy Design is a two component, decorative, acid resistant epoxy grout from Mapei, classified RG under EN 13888 and R2T as an adhesive. It was developed to make epoxy grouting genuinely easy to apply and clean off, with a smooth creamy texture that fills joints in ceramic, glass mosaic and stone with a fine, uniform finish.

  • Decorative grouting of internal and external floors and walls
  • Grouting glass mosaic and stone with a fine uniform finish
  • Hygiene sensitive wet areas benefiting from bacteriostatic joints
  • Acid resistant bonding on common building substrates
  • Colour matched designer joints for premium interiors
Data sheet1.8 MB

Build a list across products and send it once, or ask about Kerapoxy Easy Design on WhatsApp now.

Class
RG
Consumption
0.16 kg/m² on a 600x600x10 mm tile at a 3 mm joint
Pack we stock
3 kg
Colour
0100 White, 0103 White Moon, 0110 Manhattan, 0111 Silver Grey, 0112 Medium Grey, 0113 Cement Grey, 0114 Anthracite, 0119 London Grey

Mapei document 09001

About Kerapoxy Easy Design

A bacteriostatic agent with BioBlock technology helps joints stay hygienic in wet and humid conditions. It suits decorative grouting of internal and external floors and walls and also provides an acid resistant bond on common building substrates. For designers in the UAE it opens a wide palette of colours that keep their appearance under regular cleaning. The full technical data sheet with times, consumption and chemical resistance is available for download here.

Documentation

Related documentation

  • Technical data sheet

    1.8 MB · PDF

    Kerapoxy Easy Design as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm
mm
mm
mm

The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.

As published in the data sheet

8.00kg

  • 600 x 600 x 10 mm tile, 3 mm joint
  • 0.16 kg/m2 by the sheet's own formula
  • over 50 m2

Order 3 packs of 3 kg pre dosed drum, component A plus component B

Send this quantity for a quote

Taken from the Kerapoxy Easy Design data sheet: Kerapoxy Easy Design shares its 108 cell table with Kerapoxy CQ, whose sheet prints the constant 1.6 in plain text. 1.6 reproduces all 108 cells; the 1.55 derived from the density of the mix reproduces 87. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Decorative grouting of internal and external floors and walls
  2. 02Grouting glass mosaic and stone with a fine uniform finish
  3. 03Hygiene sensitive wet areas benefiting from bacteriostatic joints
  4. 04Acid resistant bonding on common building substrates
  5. 05Colour matched designer joints for premium interiors

Specification

Technical data.

  • RG
  • EN 13888 and ISO 13007
  • EMICODE (used as grout): EC1 Plus - very low emission
Kerapoxy Easy Design technical specifications from the manufacturer TDS
Joint width15 mm wide
Pack size3 kg
Pot life45 minutes
Open time(as an adhesive): 40 minutes
Set to light foot traffic24 hours
Colours0100 White, 0103 White Moon, 0110 Manhattan, 0111 Silver Grey, 0112 Medium Grey, 0113 Cement Grey, 0114 Anthracite, 0119 London Grey
Mixing ratiocomponent A : component B = 90 : 10
Consistencycreamy paste gel
Storage and shelf lifeFloor grouted with Kerapoxy Easy Design Kerapoxy Easy Design may be stored up to 24 months in its original packaging in a cool, dry place. Store component A at a temperature of at least +10°C to avoid crystallisation of the product, reversible by heating up.
EMICODE(used as grout): EC1 Plus - very low emission
Water absorption0.02
Density1.67 1.05 g/cm³

Typical values as Mapei prints them in the data sheet for Kerapoxy Easy Design. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

3 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 90 : 10. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

45 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Floor grouted with Kerapoxy Easy Design Kerapoxy Easy Design may be stored up to 24 months in its original packaging in a cool, dry place. Store component A at a temperature of at least +10°C to avoid crystallisation of the product, reversible by heating up. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Kerapoxy Easy Design, a epoxy grout manufactured by Mapei, classified RG. Allow 0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint, as published by the manufacturer. Mix at component A : component B = 90 : 10. Supplied in 3 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Kerapoxy Easy Design
ProductKerapoxy Easy Design
ManufacturerMapei
TypeEpoxy Grout
ClassificationRG
Consumption0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint
Pack size3 kg
Mixing ratiocomponent A : component B = 90 : 10
Set time24 hours
Pot life45 minutes
Open time(as an adhesive): 40 minutes
Unit of measurementm2

Frequently Asked Questions

Kerapoxy Easy Design is classified RG according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 15 mm wide

3 kg

You can download the official Kerapoxy Easy Design technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Kerapoxy Easy Design in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerapoxy Easy Design you need, or describe the job and we will work it out with you.

Chat on WhatsApp