Keraset tile adhesive pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Tile AdhesiveNo. 20 / 54

Keraset Technical Data Sheet (TDS)

Tile Adhesive to C1.

Keraset is a cementitious adhesive for ceramic tiles, produced by Mapei for the UAE market and classified C1 under ISO 13007-1 and EN 12004. It bonds ceramic tiles and mosaics on floors, walls and ceilings in both internal and external applications.

  • Bonding ceramic tiles and mosaics on internal and external floors, walls and ceilings
  • Fixing paper faced or mesh backed ceramic mosaics
  • Installing absorbent single fired and double fired ceramic tiles
  • Application over traditional render, cement mortar and cured screeds
  • Tiling anhydrite surfaces after priming with Primer G
Data sheet2.1 MB

Build a list across products and send it once, or ask about Keraset on WhatsApp now.

Class
C1
Consumption
2 to 5 kg/m²
Pack we stock
25 kg
Colour
Grey, White

Mapei document 00108 · revision 1-2024

About Keraset

The adhesive is easy to trowel, highly thixotropic and hardens without appreciable shrinkage, giving reliable adhesion on traditional render, cement mortar and cured cementitious screeds; anhydrite surfaces can be tiled after priming. Consumption is approximately 2 kg per square metre for mosaics with a number 4 trowel, 2.5 to 3 kg per square metre for normal sizes and around 5 kg per square metre for external floor and wall coverings. Keraset comes in white and grey 25 kg paper bags. The full technical data sheet is available for download on this page.

Documentation

Related documentation

  • Technical data sheet

    Revision 1-2024 · 2.1 MB · PDF

    Keraset as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

125 to 150kg

  • Normal size tiles, trowel No. 5, 5x5 mm: 2.5 to 3 kg/m2
  • over 50 m2

Order 5 to 6 packs of 25 kg bag

Send this quantity for a quote

Taken from the Keraset data sheet: CONSUMPTION: bonding of ceramic mosaics, small size tiles in general (trowel No. 4; size 4x4 mm) approx. 2 kg/m2, normal size tiles (trowel No. 5; size 5x5 mm) approx. 2.5-3 kg/m2, external floor and wall coverings (trowel No. 6; size 6x6 mm) approx. 5 kg/m2. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Bonding ceramic tiles and mosaics on internal and external floors, walls and ceilings
  2. 02Fixing paper faced or mesh backed ceramic mosaics
  3. 03Installing absorbent single fired and double fired ceramic tiles
  4. 04Application over traditional render, cement mortar and cured screeds
  5. 05Tiling anhydrite surfaces after priming with Primer G

Where it is not the right product

  • Under porcelain or any tile with very low water absorption, which needs a C2 adhesive
  • For large format tiles, where a deformable C2 S1 or S2 adhesive is required
  • On facades or substrates that move, which need a deformable adhesive

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C1
  • EN 12004 and ISO 13007
  • EMICODE EC1 Plus - very low-emission
Keraset technical specifications from the manufacturer TDS
CoverageBonding of ceramic mosaics small size tiles in general (trowel No. 4; size 4x4 mm): approx. 2 kg/m² normal size tiles (trowel No. 5; size 5x5 mm): approx. 2.5-3 kg/m² external floor and wall coverings (trowel No. 6; size 6x6 mm): approx. 5 kg/m²
Pack size25 kg, 20 kg
Open time> 20 minutes
Adjustment timeapprox. 45 minutes
Set to light foot traffic24 hours
ColoursGrey, White
Mixing ratio100 parts Keraset with 24-26 parts water by weight
Application temperaturefrom +5°C to +40°C
Consistencypowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Keraset has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced.
EMICODEEC1 Plus - very low-emission
Phover 12
Density1300 kg/m³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Keraset. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg, 20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts Keraset with 24-26 parts water by weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

When stored in dry conditions in the original, unopened bags, Keraset has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keraset, a tile adhesive manufactured by Mapei, classified C1. Allow 2 to 5 kg/m2, as published by the manufacturer. Mix at 100 parts Keraset with 24-26 parts water by weight. Supplied in 25 kg, 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keraset
ProductKeraset
ManufacturerMapei
TypeTile Adhesive
ClassificationC1
Consumption2 to 5 kg/m2
Pack size25 kg, 20 kg
Mixing ratio100 parts Keraset with 24-26 parts water by weight
Set time24 hours
Open time> 20 minutes
Unit of measurementm2

Frequently Asked Questions

Keraset is classified C1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Bonding of ceramic mosaics small size tiles in general (trowel No. 4; size 4x4 mm): approx. 2 kg/m² normal size tiles (trowel No. 5; size 5x5 mm): approx. 2.5-3 kg/m² external floor and wall coverings (trowel No. 6; size 6x6 mm): approx. 5 kg/m²

25 kg, 20 kg

You can download the official Keraset technical data sheet as a PDF directly from this page, revision 1-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keraset in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keraset you need, or describe the job and we will work it out with you.

Chat on WhatsApp