
Mapei Tile AdhesiveNo. 21 / 54
Latex Plus Technical Data Sheet (TDS)
Tile Adhesive to EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1.
Latex Plus is a white latex that replaces the mixing water in Keraquick S1 and Keraquick Maxi S1 and takes the mix to C2F S2, the fast setting and highly deformable class, which is what thin porcelain, heated floors, facades and tiling over an existing floor ask for. Isolastic is the latex for the Kerabond powders; this one is dosed against the Keraquick bags, 8 to 8.5 kg for a 25 kg grey bag and 7.5 to 8 kg for a 23 kg white one, with no water added at all.
- Fast setting, highly deformable adhesive with Keraquick S1 or Keraquick Maxi S1
- Thin porcelain tile, with or without glass fibre reinforcement mesh
- Ceramic and stone over heated floors, facades, balconies and terraces
- Tiling over existing ceramic, marble, PVC or rubber floors
- Deformable skimming compound with Nivorapid, 1 to 20 mm
- Deformable skimming compound with Planipatch, 0 to 10 mm
Build a list across products and send it once, or ask about Latex Plus on WhatsApp now.
- Class
- EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1
- Consumption
- 0.7 to 2 kg/m²
- Pack we stock
- 10 kg
- Colour
- white
Mapei document 00114 · revision 9-2018
About Latex Plus
The second use decides it for levelling work: with Nivorapid or Planipatch it makes a deformable skimming compound over wood, metal, PVC, rubber or ceramic, 1 to 20 mm and 0 to 10 mm respectively. Pot life is 30 minutes, 45 with Keraquick Maxi S1, and joints grout at 2 to 3 hours.
Documentation
Related documentation
Technical data sheet
Revision 9-2018 · 1.2 MB · PDF
Latex Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
65.0 to 85.0kg
- Medium-sized tiles: 1.3 to 1.7 kg/m2
- over 50 m2
Order 7 to 9 packs of 10 kg drum
Taken from the Latex Plus data sheet: CONSUMPTION table, Latex Plus column: mosaics and small-sized tiles 0.7-1 kg/m2, medium-sized tiles 1.3-1.7 kg/m2, large-sized tiles more than 2 kg/m2. The Keraquick S1 or Keraquick Maxi S1 column of the same table is quoted in each hint. No site allowance is added unless you turn one on. Latex Plus replaces the mixing water, so this is the latex only and the Keraquick powder still has to be ordered: the sheet doses it at 8 to 8.5 kg for each 25 kg bag of grey or 7.5 to 8 kg for each 23 kg bag of white. The large-sized row is open ended, the sheet prints more than 2 kg/m2. Used instead with Nivorapid the sheet prints 0.3 to 0.5 kg/m2 per mm of thickness, and with Planipatch 0.32 to 0.47 kg/m2 per mm, which this area calculator does not cover.
Application
Where it is used.
- 01Fast setting, highly deformable adhesive with Keraquick S1 or Keraquick Maxi S1
- 02Thin porcelain tile, with or without glass fibre reinforcement mesh
- 03Ceramic and stone over heated floors, facades, balconies and terraces
- 04Tiling over existing ceramic, marble, PVC or rubber floors
- 05Deformable skimming compound with Nivorapid, 1 to 20 mm
- 06Deformable skimming compound with Planipatch, 0 to 10 mm
Specification
Technical data.
- EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1
- EN 12004 and ISO 13007
| Classification | EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1 |
|---|---|
| Coverage | Latex Plus column: mosaics and small tiles 0.7-1 kg/m2, medium tiles 1.3-1.7 kg/m2, large tiles more than 2 kg/m2 |
| Pack size | 10 kg drums |
| Pot life | 30 minutes with Keraquick S1, 45 minutes with Keraquick Maxi S1 |
| Open time | 10-15 minutes (EN 1346) |
| Set to light foot traffic | light foot traffic after 2-3 hours, ready for use after 24 hours, basins and pools after 3 days |
| Waiting time before grouting | after 2-3 hours |
| Colours | white |
| Mixing ratio | 8-8.5 kg of Latex Plus for each 25 kg bag of Keraquick S1 or Keraquick Maxi S1 grey, 7.5-8 kg for each 23 kg bag of white |
| Bond strength | tensile adhesion strength EN 1348 after 28 days: 2.5 N/mm2 |
| Application temperature | from +5°C to +30°C |
| Consistency | liquid |
| Storage and shelf life | stable for 24 months in the original sealed packaging, protect from frost |
| Density | 1.04 g/cm3, density of the mix 1550 kg/m3 |
| Ph | 7, mix approx. 11 |
| Dry solids | 34 % |
Typical values as Mapei prints them in the data sheet for Latex Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
8-8.5 kg of Latex Plus for each 25 kg bag of Keraquick S1 or Keraquick Maxi S1 grey, 7.5-8 kg for each 23 kg bag of white. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 minutes with Keraquick S1, 45 minutes with Keraquick Maxi S1. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
stable for 24 months in the original sealed packaging, protect from frost in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Latex Plus, a tile adhesive manufactured by Mapei, classified EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1. Allow 0.7 to 2 kg/m2, as published by the manufacturer. Mix at 8-8.5 kg of Latex Plus for each 25 kg bag of Keraquick S1 or Keraquick Maxi S1 grey, 7.5-8 kg for each 23 kg bag of white. Supplied in 10 kg drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Latex Plus |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1 |
| Consumption | 0.7 to 2 kg/m2 |
| Pack size | 10 kg drums |
| Mixing ratio | 8-8.5 kg of Latex Plus for each 25 kg bag of Keraquick S1 or Keraquick Maxi S1 grey, 7.5-8 kg for each 23 kg bag of white |
| Set time | light foot traffic after 2-3 hours, ready for use after 24 hours, basins and pools after 3 days |
| Pot life | 30 minutes with Keraquick S1, 45 minutes with Keraquick Maxi S1 |
| Open time | 10-15 minutes (EN 1346) |
| Unit of measurement | m2 |
Frequently Asked Questions
Latex Plus is classified EN 12004 and ISO 13007-1 C2F S2 mixed with Keraquick S1 or Keraquick Maxi S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Latex Plus column: mosaics and small tiles 0.7-1 kg/m2, medium tiles 1.3-1.7 kg/m2, large tiles more than 2 kg/m2
10 kg drums
You can download the official Latex Plus technical data sheet as a PDF directly from this page, revision 9-2018, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Latex Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Latex Plus you need, or describe the job and we will work it out with you.