MapeLevel Easy Spacer L-I accessory pack
Mapei's own picture of MapeLevel Easy Spacer L-I.

Mapei AccessoryNo. 24 / 54

MapeLevel Easy Spacer L-I Technical Data Sheet (TDS)

Mapei accessory.

MapeLevel Easy Spacer L-I is the linear version of the screw spacer in the MapeLevel Easy System, the disposable half that goes under the tile while the reusable MapeLevel Easy Cap spins down the quick thread and pulls two adjacent tiles level. L-I is for a straight joint, L-T for a T joint and L-X for a cross, so the laying pattern decides which box is ordered.

  • Levelling large format ceramic and stone tiles
  • Preventing lippage between adjacent tiles on floors and walls
  • Linear laying patterns, which is the pattern this L-I version is made for
  • Tiles from 3 to 21 mm thick with grout joints of 1 to 5 mm
  • Delicate tile faces, with the MapeLevel Easy Shield anti scratch accessory under the cap
Data sheet1.1 MB

Build a list across products and send it once, or ask about MapeLevel Easy Spacer L-I on WhatsApp now.

Pack we stock
Box of 25 x 100 piece bags
Thickness
1, 1.5, 2, 3 and 5 mm

Mapei document 00192

About MapeLevel Easy Spacer L-I

The system takes tiles 3 to 21 mm thick, and the spacer thickness, 1, 1.5, 2, 3 or 5 mm, sets the joint width; anything wider needs a Mapei Tile Spacer alongside it. Against a wedge system the thread is the difference: the cap goes on and comes off by hand with no other tool, the spacer is made to break off below the tile face, and Mapei puts consumption below that of traditional wedge systems. Polypropylene, from recycled plastic.

Documentation

Related documentation

  • Technical data sheet

    1.1 MB · PDF

    MapeLevel Easy Spacer L-I as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet quotes this in pieces, not in kilogrammes or litres, so there is no rate to multiply: its table gives the approximate number of caps and spacers for an area of 10 m2 against the two tile dimensions in centimetres. Linear laying runs from 1,980 pieces per 10 m2 for a 10 by 10 cm tile to 28 for a 200 by 200 cm tile, and cross joint laying from 980 to 26, with rows in between that do not fall in a straight line, so read the pair of dimensions off the table rather than interpolating. Mapei adds that the rates are approximate and depend on the layout and the flatness of the tiles.

There is no area calculator for MapeLevel Easy Spacer L-I because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Levelling large format ceramic and stone tiles
  2. 02Preventing lippage between adjacent tiles on floors and walls
  3. 03Linear laying patterns, which is the pattern this L-I version is made for
  4. 04Tiles from 3 to 21 mm thick with grout joints of 1 to 5 mm
  5. 05Delicate tile faces, with the MapeLevel Easy Shield anti scratch accessory under the cap

Specification

Technical data.

MapeLevel Easy Spacer L-I technical specifications from the manufacturer TDS
CoverageApproximate number of caps and spacers for an area of 10 m2, read off the tile size: linear laying 1,980 pieces at 10 by 10 cm and 28 at 200 by 200 cm, cross joint laying 980 and 26.
Joint width1 to 5 mm
Pack sizeBox of 25 x 100 piece bags
Thickness1, 1.5, 2, 3 and 5 mm
Tile thicknessTiles from 3 to 21 mm thick
MaterialPolypropylene, made from recycled plastic
VersionsL-I for linear joints, L-T for T joints, L-X for cross joints
CapMapeLevel Easy Cap, reusable, box of 16 x 50 piece bags

Typical values as Mapei prints them in the data sheet for MapeLevel Easy Spacer L-I. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

Box of 25 x 100 piece bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

For quantity surveyors

BOQ clause.

Supply and apply MapeLevel Easy Spacer L-I, a accessory manufactured by Mapei. Applied thickness 1, 1.5, 2, 3 and 5 mm. Supplied in box of 25 x 100 piece bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for MapeLevel Easy Spacer L-I
ProductMapeLevel Easy Spacer L-I
ManufacturerMapei
TypeAccessory
Thickness1, 1.5, 2, 3 and 5 mm
Pack sizeBox of 25 x 100 piece bags
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Approximate number of caps and spacers for an area of 10 m2, read off the tile size: linear laying 1,980 pieces at 10 by 10 cm and 28 at 200 by 200 cm, cross joint laying 980 and 26.

Box of 25 x 100 piece bags

You can download the official MapeLevel Easy Spacer L-I technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

MapeLevel Easy Spacer L-I in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of MapeLevel Easy Spacer L-I you need, or describe the job and we will work it out with you.

Chat on WhatsApp