
Mapei AccessoryNo. 25 / 54
MapeLevel ProWDG System Technical Data Sheet (TDS)
Mapei accessory.
MapeLevel ProWDG System is the wedge half of the Mapei tile levelling range: a reinforced polypropylene wedge driven into an HDPE spacer clip with MapeLevel EasyWDG Pushing-Pliers until two adjacent tiles sit flush and the lippage is gone. Against MapeLevel Easy in our own range, which spins a reusable cap down a screw thread by hand, this one is pliers work, and it is the wedge rather than the cap that is reused.
- Levelling large format ceramic tiles and stone slabs on floors and on walls
- Preventing lippage between adjacent tiles and holding a joint of uniform width
- Laying ceramic tiles and stone slabs 3 to 12 mm thick with ProWDG Spacer C
- Laying ceramic tiles and stone slabs 12 to 20 mm thick with ProWDG Spacer C-H
- Uneven coverings laid on deteriorated substrates
Build a list across products and send it once, or ask about MapeLevel ProWDG System on WhatsApp now.
- Pack we stock
- MapeLevel ProWDG wedge: boxes of 14 x 100 piece bags. ProWDG Spacer C: boxes of 12 x 250 piece bags. ProWDG Spacer C-H: boxes of 40 x 50 piece bags. Pushing-Pliers: boxes of 15 x 1 piece bags
- Colour
- wedge blue; Spacer C by thickness, 0.5 orange, 1 green, 1.5 grey, 2 black, 3 white, 4 yellow, 5 red; Spacer C-H white
Mapei document 09301 · revision 11-2025
About MapeLevel ProWDG System
The clip decides the job. Spacer C takes tiles and slabs 3 to 12 mm thick and comes in seven thicknesses, 0.5, 1, 1.5, 2, 3, 4 and 5 mm, each a different colour; Spacer C-H takes 12 to 20 mm in four. Both break off below the tile face and are tapped out with a mallet once the adhesive has set.
Documentation
Related documentation
Technical data sheet
Revision 11-2025 · 1.6 MB · PDF
MapeLevel ProWDG System as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
The sheet quotes this system in wedges and spacers, not in kilogrammes or litres, so there is no rate to multiply. Its consumption table gives the indicative number of pieces needed for 10 m2 against the two tile dimensions in centimetres, running from 1,980 pieces per 10 m2 for a 10 by 10 cm tile down to 28 for a 200 by 200 cm slab. The rows do not fall in a straight line, a 30 by 30 cm tile taking 431 pieces per 10 m2 where a 25 by 25 cm takes 312, so read the pair of dimensions off the table rather than interpolating between them. Mapei adds that the consumption is approximate and varies with the tile installation layout and the flatness of the tiles.
There is no area calculator for MapeLevel ProWDG System because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Levelling large format ceramic tiles and stone slabs on floors and on walls
- 02Preventing lippage between adjacent tiles and holding a joint of uniform width
- 03Laying ceramic tiles and stone slabs 3 to 12 mm thick with ProWDG Spacer C
- 04Laying ceramic tiles and stone slabs 12 to 20 mm thick with ProWDG Spacer C-H
- 05Uneven coverings laid on deteriorated substrates
Specification
Technical data.
| Coverage | Indicative wedges and spacers needed for 10 m2, read off the two tile dimensions: 1,980 pieces at 10 by 10 cm, 431 at 30 by 30 cm, 77 at 100 by 60 cm and 28 at 200 by 200 cm |
|---|---|
| Joint width | Spacer C for joints 0.5 to 5 mm wide, Spacer C-H for joints 1 to 5 mm wide |
| Pack size | MapeLevel ProWDG wedge: boxes of 14 x 100 piece bags. ProWDG Spacer C: boxes of 12 x 250 piece bags. ProWDG Spacer C-H: boxes of 40 x 50 piece bags. Pushing-Pliers: boxes of 15 x 1 piece bags |
| Colours | wedge blue; Spacer C by thickness, 0.5 orange, 1 green, 1.5 grey, 2 black, 3 white, 4 yellow, 5 red; Spacer C-H white |
| Material | polypropylene wedge and HDPE spacer clips, made of recycled plastic |
| Thickness | Spacer C 0.5, 1, 1.5, 2, 3, 4 and 5 mm; Spacer C-H 1, 2, 3 and 5 mm |
| Tile thickness | Spacer C for ceramic tiles and stone slabs 3 to 12 mm thick, Spacer C-H for 12 to 20 mm; coverings up to 20 mm thick |
| Versions | MapeLevel ProWDG wedge, MapeLevel ProWDG Spacer C, MapeLevel ProWDG Spacer C-H and MapeLevel EasyWDG Pushing-Pliers |
| Pallet | 12 boxes per pallet for the wedge and for both spacer clips |
Typical values as Mapei prints them in the data sheet for MapeLevel ProWDG System. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
MapeLevel ProWDG wedge: boxes of 14 x 100 piece bags. ProWDG Spacer C: boxes of 12 x 250 piece bags. ProWDG Spacer C-H: boxes of 40 x 50 piece bags. Pushing-Pliers: boxes of 15 x 1 piece bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply MapeLevel ProWDG System, a accessory manufactured by Mapei. Applied thickness Spacer C 0.5, 1, 1.5, 2, 3, 4 and 5 mm; Spacer C-H 1, 2, 3 and 5 mm. Supplied in mapelevel prowdg wedge: boxes of 14 x 100 piece bags. prowdg spacer c: boxes of 12 x 250 piece bags. prowdg spacer c-h: boxes of 40 x 50 piece bags. pushing-pliers: boxes of 15 x 1 piece bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | MapeLevel ProWDG System |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Thickness | Spacer C 0.5, 1, 1.5, 2, 3, 4 and 5 mm; Spacer C-H 1, 2, 3 and 5 mm |
| Pack size | MapeLevel ProWDG wedge: boxes of 14 x 100 piece bags. ProWDG Spacer C: boxes of 12 x 250 piece bags. ProWDG Spacer C-H: boxes of 40 x 50 piece bags. Pushing-Pliers: boxes of 15 x 1 piece bags |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Indicative wedges and spacers needed for 10 m2, read off the two tile dimensions: 1,980 pieces at 10 by 10 cm, 431 at 30 by 30 cm, 77 at 100 by 60 cm and 28 at 200 by 200 cm
MapeLevel ProWDG wedge: boxes of 14 x 100 piece bags. ProWDG Spacer C: boxes of 12 x 250 piece bags. ProWDG Spacer C-H: boxes of 40 x 50 piece bags. Pushing-Pliers: boxes of 15 x 1 piece bags
You can download the official MapeLevel ProWDG System technical data sheet as a PDF directly from this page, revision 11-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
MapeLevel ProWDG System in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of MapeLevel ProWDG System you need, or describe the job and we will work it out with you.