
Mapei Surface TreatmentNo. 29 / 54
Pulicol 2000 Technical Data Sheet (TDS)
Mapei surface treatment.
Pulicol 2000 is a gel of unchlorinated solvents for stripping old natural and synthetic resin adhesives, paint and grout residue off marble, ceramic, wood, concrete, cementitious levelling coats, gypsum and metal. Because it is a gel it stays where it is spread with a trowel or brush, and the sheet notes it gives off very little odour.
- Removing old adhesive from marble, ceramic tile, wood, concrete and metal floors
- Removing old adhesive from ceramic tiles and mosaic, gypsum and fibrous concrete
- Removing old natural and synthetic resin based adhesives and grout residue
- Removing paint from metal, wood and concrete surfaces
- Cleaning cementitious screeds and smoothing compounds before relaying
Build a list across products and send it once, or ask about Pulicol 2000 on WhatsApp now.
- Consumption
- 0.3 kg/m²
- Pack we stock
- 0.75 kg
- Colour
- milky white
Mapei document 00569 · revision 12-2025
About Pulicol 2000
Waiting time is what the job turns on: about 5 to 10 minutes on acrylic or vinyl adhesives in water dispersion, about 45 to 60 minutes on reactive, polyurethane or epoxy polyurethane adhesives, then scrape it back and either rinse with plenty of water or sand it. Where UltraCare Epoxy Off Gel lifts cured epoxy grout off a tile face, this strips the adhesive film off the substrate underneath. It is flammable, so rubber, PVC, solvent sensitive enamel and varnished wood floors are ruled out. Coverage is 0.3 kg per square metre.
Documentation
Related documentation
Technical data sheet
Revision 12-2025 · 1.0 MB · PDF
Pulicol 2000 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 4-2026 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Applications
The sheet calls for 1 to 2.
As published in the data sheet
15.0kg
- General rule, one application: 0.3 kg/m2
- 1 coat
- over 50 m2
Order 6 packs of 2.5 kg drum, also supplied in 0.75 kg
Taken from the Pulicol 2000 data sheet: COVERAGE: Coverage depends on the amount and type of adhesive: as a general rule, coverage is 0.3 kg/m2. No site allowance is added unless you turn one on. The sheet prints one rate and says coverage depends on the amount and type of adhesive being removed, so 0.3 kg/m2 is a general rule and not a guarantee. It also says that in certain circumstances a second application may be necessary, which is the second application on the control above and doubles the quantity.
Application
Where it is used.
- 01Removing old adhesive from marble, ceramic tile, wood, concrete and metal floors
- 02Removing old adhesive from ceramic tiles and mosaic, gypsum and fibrous concrete
- 03Removing old natural and synthetic resin based adhesives and grout residue
- 04Removing paint from metal, wood and concrete surfaces
- 05Cleaning cementitious screeds and smoothing compounds before relaying
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
| Coverage | Coverage depends on the amount and type of adhesive: as a general rule, coverage is 0.3 kg/m². |
|---|---|
| Pack size | 2.5 and 0.75 kg drums |
| Colours | milky white |
| Application temperature | from +8°C to +35°C |
| Consistency | gel |
| Storage and shelf life | 24 months in original sealed packaging. |
| Density | 0.98 |
| Waiting time before removal | acrylic or vinyl adhesives in water dispersion approx. 5-10 minutes; reactive, polyurethane or epoxy-polyurethane adhesives approx. 45-60 minutes |
| Flammable | yes |
Typical values as Mapei prints them in the data sheet for Pulicol 2000. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
2.5 and 0.75 kg drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in original sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Pulicol 2000, a surface treatment manufactured by Mapei. Allow 0.3 kg/m2, as published by the manufacturer. Supplied in 2.5 and 0.75 kg drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Pulicol 2000 |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.3 kg/m2 |
| Pack size | 2.5 and 0.75 kg drums |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Coverage depends on the amount and type of adhesive: as a general rule, coverage is 0.3 kg/m².
2.5 and 0.75 kg drums
You can download the official Pulicol 2000 technical data sheet as a PDF directly from this page, revision 12-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Pulicol 2000 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pulicol 2000 you need, or describe the job and we will work it out with you.

