
Mapei Surface TreatmentNo. 35 / 54
Ultracare Grout Protector Spray Technical Data Sheet (TDS)
Mapei surface treatment.
UltraCare Grout Protector is aimed at two surfaces and no others: joints filled with cementitious grout of class CG to EN 13888, and polished porcelain tiles. That is the line against UltraCare Stain Protector W, which is formulated for unpolished absorbent stone, terracotta and brickwork and is the wrong product on a polished tile.
- Protecting cementitious grout joints of class CG to EN 13888
- Protecting polished porcelain tiles against stains
- Surfaces in contact with foodstuffs
- Damp rooms, ready for use 12 hours after treatment
- Externally exposed surfaces needing UV stability
Build a list across products and send it once, or ask about Ultracare Grout Protector Spray on WhatsApp now.
- Consumption
- 25 ml/m²
- Pack we stock
- 0.75 l
- Colour
- colourless
Mapei document 11013 · revision 5-2022
About Ultracare Grout Protector Spray
It is a ready to use water dispersion in a 0.75 litre bottle with a nebuliser, spread out with a fleece applicator or a microfibre cloth, and it creates no film, so the colour, the shine, the breathability and the slip resistance of the surface are left as they were. One bottle treats up to 30 square metres of porcelain in one coat, or up to 800 linear metres of joint. Grout must be fully cured and acid cleaned first.
Documentation
Related documentation
Technical data sheet
Revision 5-2022 · 0.8 MB · PDF
Ultracare Grout Protector Spray as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
1,250ml
- Polished porcelain tiles, one coat: 25 ml/m2
- over 50 m2
Order 2 packs of 750 ml bottle with spray
Taken from the Ultracare Grout Protector Spray data sheet: CONSUMPTION: Up to 30 m2 of porcelain tiles surface using one 750 ml flask of UltraCare Grout Protector (one coat), according to the surface finish of the material. 750 ml over 30 m2 is 25 ml/m2. No site allowance is added unless you turn one on. Up to 30 m2 per bottle is the printed maximum yield, so 25 ml/m2 is the lightest case and a coarser or more absorbent finish takes more, which the sheet does not quantify. Treating the joints alone is a different sum again: the sheet puts one bottle at up to 800 linear metres of joint, heavily influenced by the joint size and absorption rate, and that is a length and not an area so it is not calculated here.
Application
Where it is used.
- 01Protecting cementitious grout joints of class CG to EN 13888
- 02Protecting polished porcelain tiles against stains
- 03Surfaces in contact with foodstuffs
- 04Damp rooms, ready for use 12 hours after treatment
- 05Externally exposed surfaces needing UV stability
Specification
Technical data.
- EMICODE EC1 Plus, very low emissions
| Coverage | Up to 30 m² of porcelain tiles using one 750 ml flask (one coat), according to the surface finish of the material. Applied only on grouts, up to 800 linear metres. |
|---|---|
| Pack size | 0.75 litre bottle with spray |
| Set to light foot traffic | light foot traffic 2 hours after application, damp environments ready for use in 12 hours |
| Colours | colourless |
| Application temperature | +5°C to +35°C |
| Consistency | homogeneous liquid |
| Storage and shelf life | 3 years in its original packaging |
| EMICODE | EC1 Plus, very low emissions |
| Dilution ratio | ready to use |
| Ph | 6.5 neat product at +20°C |
| Density | 1.00 g/cm³ at +20°C |
| Surface drying | 4 to 8 hours |
Typical values as Mapei prints them in the data sheet for Ultracare Grout Protector Spray. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
0.75 litre bottle with spray. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
3 years in its original packaging in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Grout Protector Spray, a surface treatment manufactured by Mapei. Allow 25 ml/m2, as published by the manufacturer. Supplied in 0.75 litre bottle with spray. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Grout Protector Spray |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 25 ml/m2 |
| Pack size | 0.75 litre bottle with spray |
| Set time | light foot traffic 2 hours after application, damp environments ready for use in 12 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Up to 30 m² of porcelain tiles using one 750 ml flask (one coat), according to the surface finish of the material. Applied only on grouts, up to 800 linear metres.
0.75 litre bottle with spray
You can download the official Ultracare Grout Protector Spray technical data sheet as a PDF directly from this page, revision 5-2022, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare Grout Protector Spray in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Grout Protector Spray you need, or describe the job and we will work it out with you.

