
Mapei Surface TreatmentNo. 36 / 54
Ultracare Grout Release Technical Data Sheet (TDS)
Mapei surface treatment.
Dark cementitious grout against a thin polished tile is a staining risk, and UltraCare Grout Release is the water dispersion applied before grouting to reduce it. Prevention rather than cure is the argument here.
- Pre grouting protection for porous tiles
- Thin polished ceramic and porcelain
- Cementine tiles and unglazed stone
- Dark grout on light or porous surfaces
- Easier post grouting clean off
Build a list across products and send it once, or ask about Ultracare Grout Release on WhatsApp now.
- Consumption
- 0.025 L/m²
- Pack we stock
- 1 l
- Colour
- colourless
Mapei document 11014
About Ultracare Grout Release
UltraCare Acid Cleaner will take hardened residue off afterwards, but only on surfaces that tolerate acid, and a polished or porous face may already be marked by then. This treatment goes on the tile first, stops the grout gripping the surface and makes the clean off easier. It suits thin polished ceramic and porous materials such as cementine tiles and unglazed stone. Coverage reaches 40 square metres per litre in one coat, heavily influenced by how absorbent the substrate is. Colourless, EC1 Plus rated, in a 1 litre pack, applied between 5 and 35 degrees and stored for three years.
Documentation
Related documentation
Technical data sheet
0.9 MB · PDF
Ultracare Grout Release as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
1.25litres
- One coat: 0.025 litre/m2
- over 50 m2
Order 2 packs of 1 litre tank
Taken from the Ultracare Grout Release data sheet: CONSUMPTION: up to 40 m2 of surface with 1 litre of UltraCare Grout Release (one coat). No site allowance is added unless you turn one on. The sheet publishes an area per litre for one coat, which is inverted here into litres per square metre. It is a best case: yield is heavily influenced by the absorbency and the surface finish of the substrate.
Application
Where it is used.
- 01Pre grouting protection for porous tiles
- 02Thin polished ceramic and porcelain
- 03Cementine tiles and unglazed stone
- 04Dark grout on light or porous surfaces
- 05Easier post grouting clean off
Specification
Technical data.
- EMICODE EC1 Plus - very low emissions
| Coverage | Up to 40 m² of surface with 1 litre of UltraCare Grout Release (one coat). Yield is heavily influenced by the absorbency level and the surface finish of the substrate to be treated. |
|---|---|
| Pack size | 1 l |
| Colours | colourless |
| Application temperature | +5°C to +35°C |
| Consistency | homogeneous liquid |
| Storage and shelf life | UltraCare Grout Release may be stored for 3 years in its original packaging. |
| EMICODE | EC1 Plus - very low emissions |
| Density | +20°C : 1.00 g/cm³ |
| Ph | 6.5 |
Typical values as Mapei prints them in the data sheet for Ultracare Grout Release. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
UltraCare Grout Release may be stored for 3 years in its original packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Grout Release, a surface treatment manufactured by Mapei. Allow 0.025 L/m2, as published by the manufacturer. Supplied in 1 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Grout Release |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.025 L/m2 |
| Pack size | 1 l |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Up to 40 m² of surface with 1 litre of UltraCare Grout Release (one coat). Yield is heavily influenced by the absorbency level and the surface finish of the substrate to be treated.
1 l
You can download the official Ultracare Grout Release technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare Grout Release in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Grout Release you need, or describe the job and we will work it out with you.

