
Mapei Surface TreatmentNo. 37 / 54
Ultracare HD Cleaner Technical Data Sheet (TDS)
Mapei surface treatment.
Grease, organic soiling and old wax treatments call for an alkaline product, and UltraCare HD Cleaner is the concentrated professional degreaser in the UltraCare line. Keep the three cleaners straight and the choice becomes simple: acid for cement residue and lime scale, neutral Multicleaner for routine maintenance, alkaline HD Cleaner for grease, stains and water based or metallic waxes on resistant substrates.
- Deep cleaning and degreasing before tiling
- Surface preparation for tile on tile work
- Removing water based and metallic wax
- Organic dirt and grease on resistant substrates
- Ceramic and natural stone floors
Build a list across products and send it once, or ask about Ultracare HD Cleaner on WhatsApp now.
- Consumption
- 0.005 to 0.033 L/m²
- Pack we stock
- 1 l
- Colour
- opalescent
Mapei document 11006 · revision 7-2026
About Ultracare HD Cleaner
It earns its place before a tile on tile installation, where a greasy or waxed existing floor will defeat any primer and adhesive put over it, so it pairs naturally with Eco Prim Grip Plus on refurbishment work. Dilution sets the yield, roughly 200 square metres per litre at one to twenty and around 30 square metres at one to five. An opalescent liquid in 1 and 5 litre packs, stored for three years.
Documentation
Related documentation
Technical data sheet
Revision 7-2026 · 0.6 MB · PDF
Ultracare HD Cleaner as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
1.65litres
- Diluted 1:5 with water: 0.033 litre/m2
- over 50 m2
Order 1 pack of 5 litre jerrycan, also 1 litre
Taken from the Ultracare HD Cleaner data sheet: CONSUMPTION: one litre diluted 1:20 with water cleans approximately 200 m2; diluted 1:5 with water coverage is approximately 30 m2. No site allowance is added unless you turn one on. Both rates are litres of undiluted concentrate per square metre, inverted from the areas per litre the sheet publishes. The stronger 1:5 dilution is the default because it is the higher consuming of the two. Consumption depends on the dilution, the degree and type of dirt and the surface.
Application
Where it is used.
- 01Deep cleaning and degreasing before tiling
- 02Surface preparation for tile on tile work
- 03Removing water based and metallic wax
- 04Organic dirt and grease on resistant substrates
- 05Ceramic and natural stone floors
Specification
Technical data.
| Coverage | With one litre of UltraCare HD Cleaner diluted at a 1:20 ratio with water, you can clean approximately 200 m of surface. Diluted at a 1:5 ratio with water coverage is approximately 30 m of surface area. Consumption depends on dilution, the degree and type of dirt, and the surface to be treated. |
|---|---|
| Pack size | 1 l, 5 l |
| Set to light foot traffic | 5 minutes |
| Colours | opalescent |
| Consistency | liquid |
| Storage and shelf life | UltraCare HD Cleaner stored in the original packaging has a storage time of 3 years. ® 2 2 |
| Density | 1.10 g/cm³ |
| Ph | 11 |
Typical values as Mapei prints them in the data sheet for Ultracare HD Cleaner. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 l, 5 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
UltraCare HD Cleaner stored in the original packaging has a storage time of 3 years. ® 2 2 in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare HD Cleaner, a surface treatment manufactured by Mapei. Allow 0.005 to 0.033 L/m2, as published by the manufacturer. Supplied in 1 l, 5 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare HD Cleaner |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.005 to 0.033 L/m2 |
| Pack size | 1 l, 5 l |
| Set time | 5 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: With one litre of UltraCare HD Cleaner diluted at a 1:20 ratio with water, you can clean approximately 200 m of surface. Diluted at a 1:5 ratio with water coverage is approximately 30 m of surface area. Consumption depends on dilution, the degree and type of dirt, and the surface to be treated.
1 l, 5 l
You can download the official Ultracare HD Cleaner technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare HD Cleaner in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare HD Cleaner you need, or describe the job and we will work it out with you.

