
Mapei Surface TreatmentNo. 41 / 54
Ultracare Keranet Easy Spray Technical Data Sheet (TDS)
Mapei surface treatment.
UltraCare Keranet Easy is the ready to use half of the Keranet pair: a 3 percent acid solution at pH 1.4 in a 750 ml trigger bottle, where UltraCare Keranet is a concentrate diluted 1 part to 5 or 10 parts water. Nothing to measure, so it suits touch up work and the moment straight after grouting.
- Removing fresh cementitious grout residue immediately after grouting
- Removing light cured grout residue the day after grouting
- Cleaning the back of porcelain tiles before they are laid
- Preventing the frame effect when installing large format tiles
- Removing cement, lime and efflorescence from porcelain, ceramic, glass mosaic, quarry tile and terracotta
- Cleaning indoor and outdoor acid resistant natural stone
Build a list across products and send it once, or ask about Ultracare Keranet Easy Spray on WhatsApp now.
- Consumption
- 0.1 L/m²
- Pack we stock
- 750 ml bottle with spray
- Colour
- transparent
Mapei document 11008 · revision 7-2026
About Ultracare Keranet Easy Spray
Once the grout has lost its plasticity and gone opaque, spray, leave it to react for 1 to 2 minutes, then work a damp cellulose sponge diagonally across the joints. On large formats that is what prevents the picture frame of residue around each tile, and the same spray cleans the back of tiles before they are laid. The acid is inorganic, so it lifts cement scum and efflorescence without hydrochloric fumes, but it is still acid: never on polished marble, limestone or cementitious terrazzo. One litre cleans up to 10 m2.
Documentation
Related documentation
Technical data sheet
Revision 7-2026 · 0.5 MB · PDF
Ultracare Keranet Easy Spray as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 5-2026 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
5.00litres
- Ready to use, sprayed and sponged: 0.1 litre/m2
- over 50 m2
Order 7 packs of 0.75 litre trigger spray bottle, printed on the sheet as 750 ml
Taken from the Ultracare Keranet Easy Spray data sheet: CONSUMPTION: 1 liter of UltraCare Keranet Easy cleans up to 10 m2. PACKAGING: UltraCare Keranet Easy is available in 750 ml bottles with spray. No site allowance is added unless you turn one on. The sheet prints one rate, a litre to ten square metres, and adds that consumption varies with the amount and type of dirt and the kind of surface, so this is the best case and heavy residue will take more. The product is ready to use, a 3 percent solution, so nothing is diluted and the figure is of product, not of mixed solution.
Application
Where it is used.
- 01Removing fresh cementitious grout residue immediately after grouting
- 02Removing light cured grout residue the day after grouting
- 03Cleaning the back of porcelain tiles before they are laid
- 04Preventing the frame effect when installing large format tiles
- 05Removing cement, lime and efflorescence from porcelain, ceramic, glass mosaic, quarry tile and terracotta
- 06Cleaning indoor and outdoor acid resistant natural stone
Specification
Technical data.
| Coverage | 1 litre cleans up to 10 m2 |
|---|---|
| Pack size | 750 ml bottle with spray |
| Colours | transparent |
| Application temperature | from 0°C to +40°C |
| Consistency | liquid |
| Storage and shelf life | 4 years in its original packaging |
| Dilution | ready to use, supplied as a 3% aqueous solution, no dilution required |
| Density | 1.00 g/cm3 |
| Ph | 1.4 |
| Reaction time | leave to react for 1 to 2 minutes, then sponge |
| Waiting time before rinsing | 5 minutes |
Typical values as Mapei prints them in the data sheet for Ultracare Keranet Easy Spray. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
750 ml bottle with spray. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
4 years in its original packaging in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Keranet Easy Spray, a surface treatment manufactured by Mapei. Allow 0.1 L/m2, as published by the manufacturer. Supplied in 750 ml bottle with spray. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Keranet Easy Spray |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.1 L/m2 |
| Pack size | 750 ml bottle with spray |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1 litre cleans up to 10 m2
750 ml bottle with spray
You can download the official Ultracare Keranet Easy Spray technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare Keranet Easy Spray in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Keranet Easy Spray you need, or describe the job and we will work it out with you.

