Ultracare Keranet surface treatment pack
Mapei's own picture. The pack we stock: 1 l.

Mapei Surface TreatmentNo. 40 / 54

Ultracare Keranet Technical Data Sheet (TDS)

Mapei surface treatment.

UltraCare Keranet is the buffered acid concentrate Mapei publishes for washing cement off a finished floor: grout residue, installation dirt, limescale, rust marks and salt efflorescence. It is diluted 1 part to 5 or 10 parts water by weight, left to act about five minutes, worked with a single disc machine or an emulsifying pad and rinsed with clean water, and it goes on undiluted to strip engobbio from porcelain.

  • Post installation cleaning of cementitious grout and adhesive residue
  • Interior and exterior walls and floors, including facades
  • Removing salt and limescale efflorescence
  • Removing rust stains from porcelain and ceramic
  • Undiluted removal of engobbio from porcelain and ceramic
  • Acid resistant natural stone, quarry tile, terracotta and glass mosaic
Data sheet0.7 MB

Build a list across products and send it once, or ask about Ultracare Keranet on WhatsApp now.

Pack we stock
1 l
Colour
transparent

Mapei document 11004 · revision 7-2026

About Ultracare Keranet

The acid is as aggressive on efflorescence as muriatic or sulphuric acid without their toxic fumes, and used properly it does not damage a coloured cement joint. The tile decides it. Acid resistant materials only: porcelain, ceramic, glass mosaic, quarry tile, terracotta and acid resistant stone. Polished marble, limestone, cementitious terrazzo and non acid resistant glazes are ruled out. Grout must be cured, one to ten days; for residue at the point of laying Mapei specifies UltraCare Keranet Easy.

Documentation

Related documentation

  • Technical data sheet

    Revision 7-2026 · 0.7 MB · PDF

    Ultracare Keranet as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet prints only that consumption varies with the dilution, the degree and type of dirt and the surface to be treated, so there is no rate to calculate from. The product is diluted 1 part to 5 or 10 parts water by weight, or used undiluted to remove engobbio, and is supplied in 1, 5 and 20 litre tanks.

There is no area calculator for Ultracare Keranet because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Post installation cleaning of cementitious grout and adhesive residue
  2. 02Interior and exterior walls and floors, including facades
  3. 03Removing salt and limescale efflorescence
  4. 04Removing rust stains from porcelain and ceramic
  5. 05Undiluted removal of engobbio from porcelain and ceramic
  6. 06Acid resistant natural stone, quarry tile, terracotta and glass mosaic

Specification

Technical data.

Ultracare Keranet technical specifications from the manufacturer TDS
CoverageDepending on the needs, it can vary based on dilution, the degree and type of dirt and the surface to be treated
Pack size1 l, 5 l and 20 l tanks
Set to light foot trafficwaiting time before rinsing 5 minutes
Colourstransparent
Application temperature0°C to +40°C
Consistencyliquid
Storage and shelf life4 years stored in the original packaging
Dilution1 : 10 or 1 : 5 parts by weight with water, also used undiluted to remove engobbio from porcelain and ceramic
Density1.10 g/cm³
Ph1.1

Typical values as Mapei prints them in the data sheet for Ultracare Keranet. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 l, 5 l and 20 l tanks. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

4 years stored in the original packaging in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultracare Keranet, a surface treatment manufactured by Mapei. Supplied in 1 l, 5 l and 20 l tanks. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultracare Keranet
ProductUltracare Keranet
ManufacturerMapei
TypeSurface Treatment
Pack size1 l, 5 l and 20 l tanks
Set timewaiting time before rinsing 5 minutes
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Depending on the needs, it can vary based on dilution, the degree and type of dirt and the surface to be treated

1 l, 5 l and 20 l tanks

You can download the official Ultracare Keranet technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultracare Keranet in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Keranet you need, or describe the job and we will work it out with you.

Chat on WhatsApp