
Mapei Surface TreatmentNo. 39 / 54
Ultracare Intensifier W Technical Data Sheet (TDS)
Mapei surface treatment.
UltraCare Intensifier W is the water based colour enhancer, a polymeric microemulsion that penetrates and protects while leaving the surface a bright finish. Absorbency is the dividing line against the solvent based Intensifier S.
- Colour enhancement of absorbent natural stone
- Terracotta, terrazzo and marble chip tiles
- Cementine tiles and engineered stone
- Occupied interiors needing low emissions
- Walls and floors, interior and exterior
Build a list across products and send it once, or ask about Ultracare Intensifier W on WhatsApp now.
- Consumption
- 0.033 L/m²
- Pack we stock
- 1 l
- Colour
- milky white
Mapei document 11010 · revision 12-2025
About Ultracare Intensifier W
This grade is formulated for natural stone of medium to high absorbency, along with terracotta, terrazzo, marble chip tiles, cementine tiles and engineered stone, on walls and floors, indoors and out, while compact or polished material belongs to the other grade. The water based chemistry carries an EC1 Plus rating for very low emissions, which is what lets it be used in an occupied apartment or hotel room without the ventilation a solvent demands. One litre covers up to 30 square metres in a single coat. A milky white liquid in 1 litre packs, applied from 5 to 35 degrees.
Documentation
Related documentation
Technical data sheet
Revision 12-2025 · 2.9 MB · PDF
Ultracare Intensifier W as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
1.65litres
- Per coat: 0.033 litre/m2
- 1 coat
- over 50 m2
Order 2 packs of 1 litre jerrycan
Taken from the Ultracare Intensifier W data sheet: CONSUMPTION: up to 30 m2 surface with 1 litre of UltraCare Intensifier W (one coat). No site allowance is added unless you turn one on. The sheet publishes an area per litre for one coat, which is inverted here into litres per square metre, and it is a best case: yield is strongly influenced by the absorbency and the surface finish. Additional coats may be applied to enhance the colour further, so the coat count is the user's choice and the sheet's own basis is one coat.
Application
Where it is used.
- 01Colour enhancement of absorbent natural stone
- 02Terracotta, terrazzo and marble chip tiles
- 03Cementine tiles and engineered stone
- 04Occupied interiors needing low emissions
- 05Walls and floors, interior and exterior
Specification
Technical data.
- EMICODE EC1 Plus - very low emissions
| Coverage | Up to 30 m surface with 1 litre of UltraCare Intensifier W (one coat). Yield is strongly influenced by the absorbency and surface finish of the substrate to be treated. |
|---|---|
| Pack size | 1 l |
| Colours | milky white |
| Application temperature | +5°C to +35°C |
| Consistency | homogeneous liquid |
| Storage and shelf life | 3 years in its original unopened packaging. |
| EMICODE | EC1 Plus - very low emissions |
| Density | 1.02 g/cm³ |
| Ph | 7.0 |
Typical values as Mapei prints them in the data sheet for Ultracare Intensifier W. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
3 years in its original unopened packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Intensifier W, a surface treatment manufactured by Mapei. Allow 0.033 L/m2, as published by the manufacturer. Supplied in 1 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Intensifier W |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.033 L/m2 |
| Pack size | 1 l |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Up to 30 m surface with 1 litre of UltraCare Intensifier W (one coat). Yield is strongly influenced by the absorbency and surface finish of the substrate to be treated.
1 l
You can download the official Ultracare Intensifier W technical data sheet as a PDF directly from this page, revision 12-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare Intensifier W in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Intensifier W you need, or describe the job and we will work it out with you.

