
Mapei Tile AdhesiveNo. 53 / 54
Ultralite S2 Flex Technical Data Sheet (TDS)
Tile Adhesive to ISO 13007-1 C2E S2.
Ultralite S2 Flex is a one component, highly deformable, lightweight cementitious adhesive from Mapei, classified C2E S2 under ISO 13007-1 with extended open time. Deformability class S2 is the highest defined by the standard, so the adhesive tolerates substrate movement and thermal stress, making it a strong choice for large format and thin porcelain panels, external facades and floors subject to deflection.
- Bonding large format and thin porcelain tiles on floors, walls and facades
- Installing ceramic tiles of all types on interior and exterior surfaces
- Fixing dimensionally stable, stain resistant stone tiles
- Tiling substrates subject to movement or thermal stress
- Application in hot conditions thanks to easy workability at high temperatures
Build a list across products and send it once, or ask about Ultralite S2 Flex on WhatsApp now.
- Class
- ISO 13007-1 C2E S2
- Consumption
- 0.8 kg/m² per mm
- Pack we stock
- 15 kg
- Colour
- Grey, White
Mapei document 02866 · revision 3-2024
About Ultralite S2 Flex
It applies easily even at high temperatures, which matters on UAE sites, and its lightweight formulation raises coverage per bag. The adhesive bonds ceramic tiles of every type, dimensionally stable stone and all mosaics on interior and exterior surfaces. The UAE edition of the technical data sheet, including full performance values and consumption guidance, can be downloaded from this page.
Documentation
Related documentation
Technical data sheet
Revision 3-2024 · 1.9 MB · PDF
Ultralite S2 Flex as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 4 mm.
As published in the data sheet
120kg
- 0.8 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 8 packs of 15 kg bag
Taken from the Ultralite S2 Flex data sheet: CONSUMPTION: 0.8 kg/m2 per mm of thickness, equal to 1.5 kg/m2 for the installation of uncoupling or waterproofing membranes (using a 5 mm notched trowel) and 2-3.5 kg/m2 for the installation of tiles. No site allowance is added unless you turn one on. The sheet prints two worked examples off the same rate: about 1.9 mm of bed, 1.5 kg/m2, for bonding an uncoupling or waterproofing membrane with a 5 mm notched trowel, and 2.5 to 4.4 mm of bed, 2-3.5 kg/m2, for tiles depending on the trowel the tile size calls for. It gives no working thickness range, so the 2 to 20 mm bounds and the 3 mm default are the calculator's own. The sheet prints a rate per millimetre but no working range. The 2 to 4 mm bounds are the calculator’s, chosen so the result stays inside the 1.5 to 2.5 kg/m2 band the sheet itself quotes for a normal bed.
Application
Where it is used.
- 01Bonding large format and thin porcelain tiles on floors, walls and facades
- 02Installing ceramic tiles of all types on interior and exterior surfaces
- 03Fixing dimensionally stable, stain resistant stone tiles
- 04Tiling substrates subject to movement or thermal stress
- 05Application in hot conditions thanks to easy workability at high temperatures
Specification
Technical data.
- ISO 13007-1 C2E S2
- EN 12004 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Classification | ISO 13007-1 C2E S2 |
|---|---|
| Coverage | 0.8 kg/m² per mm of thickness, equal to: ▪ 1.5 kg/m² for the installation of uncoupling or waterproofing membranes (using a 5 mm notched trowel); ▪ 2-3.5 kg/m² for the installation of tiles (depending on the type of trowel selected according to the size of the tiles). |
| Pack size | 15 kg |
| Pot life | > 8 hours |
| Open time | 30 minutes |
| Adjustment time | 45 minutes |
| Set to light foot traffic | 24 hours |
| Colours | Grey, White |
| Mixing ratio | 100 parts of Ultralite S2 Flex white or grey with 38-40 |
| Application temperature | from +5°C to +40°C |
| Consistency | powder |
| Storage and shelf life | Ultralite S2 Flex may be stored for 12 months in its original packaging in a dry area. |
| EMICODE | EC1 Plus - very low emission |
| Ph | > 12 |
| Density | 870 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Ultralite S2 Flex. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Ultralite S2 Flex white or grey with 38-40. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
> 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Ultralite S2 Flex may be stored for 12 months in its original packaging in a dry area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultralite S2 Flex, a tile adhesive manufactured by Mapei, classified ISO 13007-1 C2E S2. Allow 0.8 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts of Ultralite S2 Flex white or grey with 38-40. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultralite S2 Flex |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | ISO 13007-1 C2E S2 |
| Consumption | 0.8 kg/m2 per mm |
| Pack size | 15 kg |
| Mixing ratio | 100 parts of Ultralite S2 Flex white or grey with 38-40 |
| Set time | 24 hours |
| Pot life | > 8 hours |
| Open time | 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultralite S2 Flex is classified ISO 13007-1 C2E S2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: 0.8 kg/m² per mm of thickness, equal to: ▪ 1.5 kg/m² for the installation of uncoupling or waterproofing membranes (using a 5 mm notched trowel); ▪ 2-3.5 kg/m² for the installation of tiles (depending on the type of trowel selected according to the size of the tiles).
15 kg
You can download the official Ultralite S2 Flex technical data sheet as a PDF directly from this page, revision 3-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Ultralite S2 Flex in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultralite S2 Flex you need, or describe the job and we will work it out with you.