Ultralite S1 Quick tile adhesive pack
Mapei's own picture. The pack we stock: 15 kg.

Mapei Tile AdhesiveNo. 52 / 54

Ultralite S1 Quick Technical Data Sheet (TDS)

Tile Adhesive to ISO 13007-1 C2FT S1.

Ultralite S1 Quick is a rapid setting version of Mapei Ultralite S1, a lightweight, deformable cementitious adhesive classified C2FT S1 under ISO 13007-1. It combines fast hydration with no vertical slip, good trowelability and high wetting of the tile back, letting floors accept grouting and traffic much sooner than standard setting adhesives.

  • Fast track tiling where early grouting and quick handover are required
  • Bonding ceramic tiles of all types and sizes on internal and external substrates
  • Fixing stone material on floors and walls
  • Bonding mosaic of all types, including in swimming pools
  • Thin porcelain tiles on floors, walls and external facades
Data sheet2.3 MB

Build a list across products and send it once, or ask about Ultralite S1 Quick on WhatsApp now.

Class
ISO 13007-1 C2FT S1
Consumption
0.8 kg/m² per mm
Pack we stock
15 kg
Colour
Grey, White

Mapei document 00037 · revision 1-2021

About Ultralite S1 Quick

The lightweight formulation increases yield per bag and reduces fatigue for installers. It bonds all types and sizes of ceramic tile, stone material and mosaic on internal and external substrates, including swimming pools and thin porcelain on facades. For fast track fit outs and handovers in the UAE, the quick setting profile shortens the wait between fixing and grouting. Download the UAE edition technical data sheet on this page for complete data.

Documentation

Related documentation

  • Technical data sheet

    Revision 1-2021 · 2.3 MB · PDF

    Ultralite S1 Quick as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 4 mm.

As published in the data sheet

120kg

  • 0.8 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 8 packs of 15 kg bag

Send this quantity for a quote

Taken from the Ultralite S1 Quick data sheet: CONSUMPTION: 0.8 kg/m2 per mm of thickness, equal to 1.5-2.5 kg/m2. No site allowance is added unless you turn one on. The sheet gives no working thickness range, only the rate per mm and the practical band it corresponds to, so the 2 to 20 mm bounds and the 3 mm default are the calculator's own. At 3 mm the sum lands at 2.4 kg/m2, inside the sheet's own 1.5-2.5 kg/m2 band. The bag is light because the product is, 15 kg covers what a 25 kg bag of a conventional adhesive would. The sheet prints a rate per millimetre but no working range. The 2 to 4 mm bounds are the calculator’s, chosen so the result stays inside the 1.5 to 2.5 kg/m2 band the sheet itself quotes for a normal bed.

Application

Where it is used.

  1. 01Fast track tiling where early grouting and quick handover are required
  2. 02Bonding ceramic tiles of all types and sizes on internal and external substrates
  3. 03Fixing stone material on floors and walls
  4. 04Bonding mosaic of all types, including in swimming pools
  5. 05Thin porcelain tiles on floors, walls and external facades

Specification

Technical data.

  • ISO 13007-1 C2FT S1
  • EN 12004 and ISO 13007
Ultralite S1 Quick technical specifications from the manufacturer TDS
ClassificationISO 13007-1 C2FT S1
Coverage0.8 kg/m² per mm of thickness, equal to 1.5-2.5 kg/m².
Pack size15 kg
Pot lifeof the mix: 50 minutes
Open time≥ 20 minutes
Adjustment time15 minutes
Set to light foot traffic2-3 hours
Waiting time before groutingtile joints on walls: after 2-3 hours
ColoursGrey, White
Mixing ratio100 parts of Ultralite S1 Quick with 34-36 parts of water
Application temperaturefrom +5°C to +40°C
Consistencypowder
Storage and shelf lifeUltralite S1 Quick may be stored for up to 12 months in its original packaging in a dry place.
Phmore than 12
Density900 kg/cm³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Ultralite S1 Quick. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts of Ultralite S1 Quick with 34-36 parts of water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

of the mix: 50 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Ultralite S1 Quick may be stored for up to 12 months in its original packaging in a dry place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultralite S1 Quick, a tile adhesive manufactured by Mapei, classified ISO 13007-1 C2FT S1. Allow 0.8 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts of Ultralite S1 Quick with 34-36 parts of water. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultralite S1 Quick
ProductUltralite S1 Quick
ManufacturerMapei
TypeTile Adhesive
ClassificationISO 13007-1 C2FT S1
Consumption0.8 kg/m2 per mm
Pack size15 kg
Mixing ratio100 parts of Ultralite S1 Quick with 34-36 parts of water
Set time2-3 hours
Pot lifeof the mix: 50 minutes
Open time≥ 20 minutes
Unit of measurementm2

Frequently Asked Questions

Ultralite S1 Quick is classified ISO 13007-1 C2FT S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 0.8 kg/m² per mm of thickness, equal to 1.5-2.5 kg/m².

15 kg

You can download the official Ultralite S1 Quick technical data sheet as a PDF directly from this page, revision 1-2021, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultralite S1 Quick in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultralite S1 Quick you need, or describe the job and we will work it out with you.

Chat on WhatsApp