Ultralite S1 tile adhesive pack
Mapei's own picture. The pack we stock: 15 kg.

Mapei Tile AdhesiveNo. 51 / 54

Ultralite S1 Technical Data Sheet (TDS)

Tile Adhesive to C2TE S1.

Ultralite S1 is a lightweight, deformable, one component cementitious adhesive from Mapei, classified C2TE S1 under ISO 13007-1. Its low density gives roughly 80 percent higher yield per kilogram than conventional adhesives, so a single bag covers more area and is easier to carry around site.

  • Bonding all types and sizes of ceramic tiles on uneven internal and external substrates
  • Fixing gloss mosaic of every type
  • Installing stable, moisture insensitive natural stone
  • Bonding thin porcelain tiles on floors, walls and external facades
  • Large format tile installation where deformability matters
Data sheet3.8 MB

Build a list across products and send it once, or ask about Ultralite S1 on WhatsApp now.

Class
C2TE S1
Consumption
0.8 kg/m² per mm
Pack we stock
15 kg
Colour
Grey

Mapei document 00071 · revision 3-2012

About Ultralite S1

The formulation bonds all types and sizes of ceramic tile, gloss mosaic and stable natural stone on internal and external substrates, including thin porcelain panels on facades. Deformability class S1 helps the adhesive absorb substrate movement, which suits large format tiles and demanding commercial floors. Coverage and full performance data, including open time and setting characteristics for hot climate installation, are listed in the UAE edition of the technical data sheet available for download on this page.

Documentation

Related documentation

  • Technical data sheet

    Revision 3-2012 · 3.8 MB · PDF

    Ultralite S1 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 4 mm.

As published in the data sheet

120kg

  • 0.8 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 8 packs of 15 kg bag

Send this quantity for a quote

Taken from the Ultralite S1 data sheet: CONSUMPTION: 0.8 kg/m2 per mm of thickness, equal to 1.5-2.5 kg/m2. No site allowance is added unless you turn one on. The sheet gives no working thickness range, only the rate per mm and the practical band it corresponds to, so the 2 to 20 mm bounds and the 3 mm default are the calculator's own. At 3 mm the sum lands at 2.4 kg/m2, inside the sheet's own 1.5-2.5 kg/m2 band. The bag is light because the product is, 15 kg covers what a 25 kg bag of a conventional adhesive would. The sheet prints a rate per millimetre but no working range. The 2 to 4 mm bounds are the calculator’s, chosen so the result stays inside the 1.5 to 2.5 kg/m2 band the sheet itself quotes for a normal bed.

Application

Where it is used.

  1. 01Bonding all types and sizes of ceramic tiles on uneven internal and external substrates
  2. 02Fixing gloss mosaic of every type
  3. 03Installing stable, moisture insensitive natural stone
  4. 04Bonding thin porcelain tiles on floors, walls and external facades
  5. 05Large format tile installation where deformability matters

Specification

Technical data.

  • C2TE S1
  • EN 12004 and ISO 13007
Ultralite S1 technical specifications from the manufacturer TDS
ClassificationC2TE S1
Coverage0.8 kg/m² per mm of thickness, equal to 1.5-2.5 kg/m².
Pack size15 kg
Pot lifeof the mix: more than 8 hours
Open time> 30 minutes
Adjustment time45 minutes
Set to light foot traffic24 hours
Waiting time before groutingtile joints on walls: after 4-8 hours
ColoursGrey
Bond strengthaccording to EN 1348 (N/mm²)
Application temperaturefrom +5°C to +40°C
Consistencypowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Ultralite S1 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. Spreading Ultralite S1 with a notched trowel on wall Spreading adhesive on the back of the tile Layin
Phmore than 12
Density870 kg/cm³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Ultralite S1. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

of the mix: more than 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

When stored in dry conditions in the original, unopened bags, Ultralite S1 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. Spreading Ultralite S1 with a notched trowel on wall Spreading adhesive on the back of the tile Layin in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultralite S1, a tile adhesive manufactured by Mapei, classified C2TE S1. Allow 0.8 kg/m2 per mm, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultralite S1
ProductUltralite S1
ManufacturerMapei
TypeTile Adhesive
ClassificationC2TE S1
Consumption0.8 kg/m2 per mm
Pack size15 kg
Set time24 hours
Pot lifeof the mix: more than 8 hours
Open time> 30 minutes
Unit of measurementm2

Frequently Asked Questions

Ultralite S1 is classified C2TE S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 0.8 kg/m² per mm of thickness, equal to 1.5-2.5 kg/m².

15 kg

You can download the official Ultralite S1 technical data sheet as a PDF directly from this page, revision 3-2012, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultralite S1 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultralite S1 you need, or describe the job and we will work it out with you.

Chat on WhatsApp