Ultracolor Plus grout pack
Mapei's own picture. The pack we stock: 5 kg.

Mapei GroutNo. 50 / 54

Ultracolor Plus Technical Data Sheet (TDS)

Grout to CG2FWA.

Ultracolor Plus is a high performance, fast setting and drying polymer modified grout from Mapei, classified CG2FWA under ISO 13007-3, the improved cementitious class with fast curing, reduced water absorption and high abrasion resistance. Water repellent DropEffect technology and mould resisting BioBlock technology keep joints cleaner for longer in kitchens, bathrooms and humid UAE conditions.

  • Grouting ceramic, porcelain and terracotta floors and walls
  • Grouting stone, glass and marble mosaic
  • High traffic commercial areas such as airports and shopping centres
  • Kitchens, bathrooms and humid areas needing mould resistant joints
  • Residential interiors requiring consistent colour without efflorescence
Data sheet1.3 MB

Build a list across products and send it once, or ask about Ultracolor Plus on WhatsApp now.

Class
CG2FWA
Consumption
0.16 kg/m² on a 600x600x10 mm tile at a 3 mm joint
Pack we stock
5 kg
Colour
100, 103, 110, 111, 112, 113, 114, 119

Mapei document 02801 · revision 7-2026

About Ultracolor Plus

It grouts floors and walls in every type of ceramic, terracotta, stone and glass or marble mosaic, is walkable after roughly 24 hours and never produces efflorescence. The colour range covers 40 coordinated shades. Pack format is boxes of 4 by 5 kg alupacks. Residential rooms, hotels, airports and shopping centres all fall within its scope. Download the UAE edition technical data sheet on this page for complete data.

Documentation

Related documentation

  • Technical data sheet

    Revision 7-2026 · 1.3 MB · PDF

    Ultracolor Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm
mm
mm
mm

The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.

As published in the data sheet

8.00kg

  • 600 x 600 x 10 mm tile, 3 mm joint
  • 0.16 kg/m2 by the sheet's own formula
  • over 50 m2

Order 2 packs of 5 kg alupack, boxes of 4

Send this quantity for a quote

Taken from the Ultracolor Plus data sheet: The sheet prints the formula itself on its consumption page: (A + B) / (A x B) x C x D x 1,6 = kg/m2, with A and B the tile length and width, C the thickness and D the joint width, all in millimetres. 1.6 reproduces all 130 printed cells of its consumption table. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Grouting ceramic, porcelain and terracotta floors and walls
  2. 02Grouting stone, glass and marble mosaic
  3. 03High traffic commercial areas such as airports and shopping centres
  4. 04Kitchens, bathrooms and humid areas needing mould resistant joints
  5. 05Residential interiors requiring consistent colour without efflorescence

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • CG2FWA
  • EN 13888 and ISO 13007
  • EMICODE EC1 Plus - very low emission
Ultracolor Plus technical specifications from the manufacturer TDS
ClassificationCG2FWA
Joint width20 mm wide, with very low
Pack size5 kg
Pot life20-30 minutes
Set to light foot trafficapprox. 3 hours
Colours100, 103, 110, 111, 112, 113, 114, 119
Mixing ratio100 parts Ultracolor Plus with 22-24 parts water
Water resistance0.1 g
Application temperaturefrom +5°C to +35°C
Consistencyfine powder
Storage and shelf lifeUltracolor Plus can be stored for 24 months in its original packaging in a dry place. However, after a certain amount of time, the setting time may extend but without modifying the final characteristics of the product.
EMICODEEC1 Plus - very low emission
Density1400 kg/m³
Dry solids100%
Phapprox. 11
Water absorption0.1 g

Typical values as Mapei prints them in the data sheet for Ultracolor Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts Ultracolor Plus with 22-24 parts water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

20-30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Ultracolor Plus can be stored for 24 months in its original packaging in a dry place. However, after a certain amount of time, the setting time may extend but without modifying the final characteristics of the product. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultracolor Plus, a grout manufactured by Mapei, classified CG2FWA. Allow 0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint, as published by the manufacturer. Mix at 100 parts Ultracolor Plus with 22-24 parts water. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultracolor Plus
ProductUltracolor Plus
ManufacturerMapei
TypeGrout
ClassificationCG2FWA
Consumption0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint
Pack size5 kg
Mixing ratio100 parts Ultracolor Plus with 22-24 parts water
Set timeapprox. 3 hours
Pot life20-30 minutes
Unit of measurementm2

Frequently Asked Questions

Ultracolor Plus is classified CG2FWA according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 20 mm wide, with very low

5 kg

You can download the official Ultracolor Plus technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultracolor Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracolor Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp