Ultracare Stain Remover tile adhesive pack
Mapei's own picture. The pack we stock: 0.5 l.

Mapei Tile AdhesiveNo. 49 / 54

Ultracare Stain Remover Technical Data Sheet (TDS)

Mapei tile adhesive.

Oil and grease, not rust, are what UltraCare Stain Remover pulls out. It is a thick aqueous paste at pH 12 that emulsifies an organic stain, drags it to the surface and traps it in absorbent mineral thickeners, so the dirt lifts away with the dried residue.

  • Removing organic stains from terracotta
  • Removing organic stains from natural and engineered stone
  • Removing organic stains from cementitious surfaces
  • Removing greasy stains from absorbent surfaces
  • Removing water based and metallic wax
Data sheet0.8 MB

Build a list across products and send it once, or ask about Ultracare Stain Remover on WhatsApp now.

Consumption
1 L/m² per mm
Pack we stock
0.5 l
Colour
beige

Mapei document 11025

About Ultracare Stain Remover

The surfaces it suits are the absorbent ones, terracotta, natural and engineered stone and cementitious floors, and it also strips water based and metallic wax. Its exclusion list is the part worth reading twice: never on polished or waxed surfaces, wood, linoleum, rubber, PVC, resin coatings or anything already treated with a protective compound. Apply 1 to 3 mm on a dry surface, leave it 12 to 24 hours until it has hardened and changed colour, then scrape off and rinse. One millimetre over a square metre takes roughly a litre.

Documentation

Related documentation

  • Technical data sheet

    0.8 MB · PDF

    Ultracare Stain Remover as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 3 mm.

As published in the data sheet

100litres

  • 1 litre/m2 per mm
  • 2 mm thick
  • over 50 m2
Send this quantity for a quote

Taken from the Ultracare Stain Remover data sheet: CONSUMPTION: 1 mm of UltraCare Stain Remover applied on 1 m2 of surface corresponds to approx. 1 lt of product; the application section calls for an even coat approx. 1-3 mm thick on the stained area. No site allowance is added unless you turn one on. The sheet opens the same section by saying the consumption may vary significantly depending on the amount and type of dirt and the kind of surface, and advises preliminary tests to assess the exact quantity. Note the mismatch in units: the rate is quoted in litres and the bucket is quoted at 0.5 kg, and the sheet gives no density, so the number of buckets cannot be read off this figure. The sheet quotes the rate in litres and the pack in kilogrammes and publishes no density, so a container count cannot honestly be worked out from the result.

Application

Where it is used.

  1. 01Removing organic stains from terracotta
  2. 02Removing organic stains from natural and engineered stone
  3. 03Removing organic stains from cementitious surfaces
  4. 04Removing greasy stains from absorbent surfaces
  5. 05Removing water based and metallic wax

Specification

Technical data.

  • EN 12004 and ISO 13007
Ultracare Stain Remover technical specifications from the manufacturer TDS
CoverageThe consumption may vary significantly depending on the amount and type of dirt and the kind of surface to be treated. 1 mm of UltraCare Stain Remover applied on 1 m2 of surface corresponds to approx. 1 lt of product. It is advisable to carry out preliminary tests in order to assess the exact quanti
Pack size0.5 l
Coloursbeige
Consistencypaste
Storage and shelf lifeUltraCare Stain Remover can be stored for 36 months in its original packaging.
Density1.25 g/cm
Ph12
Odourcharacteristic

Typical values as Mapei prints them in the data sheet for Ultracare Stain Remover. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

0.5 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

UltraCare Stain Remover can be stored for 36 months in its original packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultracare Stain Remover, a tile adhesive manufactured by Mapei. Allow 1 L/m2 per mm, as published by the manufacturer. Supplied in 0.5 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultracare Stain Remover
ProductUltracare Stain Remover
ManufacturerMapei
TypeTile Adhesive
Consumption1 L/m2 per mm
Pack size0.5 l
Unit of measurementm2

Frequently Asked Questions

As per the TDS: The consumption may vary significantly depending on the amount and type of dirt and the kind of surface to be treated. 1 mm of UltraCare Stain Remover applied on 1 m2 of surface corresponds to approx. 1 lt of product. It is advisable to carry out preliminary tests in order to assess the exact quanti

0.5 l

You can download the official Ultracare Stain Remover technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultracare Stain Remover in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Stain Remover you need, or describe the job and we will work it out with you.

Chat on WhatsApp