
Mapei WaterproofingNo. 21 / 47
Mapelastic Foundation Technical Data Sheet (TDS)
Waterproofing to CM O1.
Buried concrete is the hardest case on this line, because water pushes from the far side of the wall. Mapelastic Foundation is the two component flexible cementitious mortar built for it, rated for both positive and negative water pressure, and Mapei lists it for foundation walls, retaining walls, underground car parks, lift pits, cellars, basins, channels and swimming pools.
- Waterproofing foundation and retaining walls
- Underground car parks, cellars and lift pits
- Basins, channels and reservoirs
- Swimming pool structures
- Surfaces subject to negative water pressure
- Roller or spray applied below grade waterproofing
Build a list across products and send it once, or ask about Mapelastic Foundation on WhatsApp now.
- Class
- CM O1
- Consumption
- 3.3 to 4.2 kg/m² over 2 coats
- Pack we stock
- 25 kg
- Colour
- grey white
Mapei document 02069
About Mapelastic Foundation
Crack bridging reaches 2.0 mm against an EN 14891 minimum of 0.75 mm, so it tolerates the movement a buried structure shows without splitting. Components mix at 2.2 parts A to 1 part B with about 60 minutes of pot life, and consumption is roughly 1.65 kg per square metre per millimetre by roller, or up to 2.1 by rendering machine on rough surfaces. Where the UAE water table sits close and saline, waterproof the lift pit before the pit starts filling.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapelastic Foundation as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
Coats, 1 mm per coat
The sheet calls for 2 to 3.
As published in the data sheet
165kg
- Roller application, 1 mm per coat: 1.65 kg/m2
- 2 coats
- over 50 m2
Order 6 packs of 32 kg kit, component A 22 kg bag plus component B 10 kg tank
Taken from the Mapelastic Foundation data sheet: CONSUMPTION: Roller application approx. 1.65 kg/m2 per mm thickness. Spray application with rendering machine: approx. 1.75 kg/m2 per mm thickness on flat surfaces, approx. 2.1 kg/m2 per mm thickness on rough surfaces with irregularities. No site allowance is added unless you turn one on. This is one of the few sheets that quantifies a rough substrate, and it does so for spray only. The printed build up is two coats to a final thickness of at least 2 mm, and the sheet forbids more than 2 mm per coat.
Application
Where it is used.
- 01Waterproofing foundation and retaining walls
- 02Underground car parks, cellars and lift pits
- 03Basins, channels and reservoirs
- 04Swimming pool structures
- 05Surfaces subject to negative water pressure
- 06Roller or spray applied below grade waterproofing
Specification
Technical data.
- CM O1
- EN 14891
- EMICODE EC1 Plus - very low emission
| Classification | CM O1 |
|---|---|
| Coverage | Roller application: ▪ approx. 1.65 kg/m² per mm thickness. Spray application with rendering machine: ▪ approx. 1.75 kg/m² per mm thickness on flat surfaces ▪ approx. 2.1 kg/m² per mm thickness on rough surfaces with irregularities |
| Pack size | 25 kg, 10 kg |
| Pot life | approx. 60 mins |
| Colours | grey white |
| Mixing ratio | component A : component B = 2,2 : 1 |
| Consistency | powder fluid |
| Storage and shelf life | Mapelastic Foundation component A may be stored for 12 months in its original packaging in a dry place. Mapelastic Foundation component B may be stored for 24 months. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.650 kg/m³ |
| Crack bridging | at +23°C: EN 14891-A.8.2 ≥ 0,75 mm 2.0 mm |
Typical values as Mapei prints them in the data sheet for Mapelastic Foundation. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg, 10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 2,2 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 60 mins. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Mapelastic Foundation component A may be stored for 12 months in its original packaging in a dry place. Mapelastic Foundation component B may be stored for 24 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapelastic Foundation, a waterproofing manufactured by Mapei, classified CM O1. Allow 3.3 to 4.2 kg/m2 over 2 coats, as published by the manufacturer. Mix at component A : component B = 2,2 : 1. Supplied in 25 kg, 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapelastic Foundation |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | CM O1 |
| Consumption | 3.3 to 4.2 kg/m2 over 2 coats |
| Pack size | 25 kg, 10 kg |
| Mixing ratio | component A : component B = 2,2 : 1 |
| Pot life | approx. 60 mins |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapelastic Foundation is classified CM O1 according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: Roller application: ▪ approx. 1.65 kg/m² per mm thickness. Spray application with rendering machine: ▪ approx. 1.75 kg/m² per mm thickness on flat surfaces ▪ approx. 2.1 kg/m² per mm thickness on rough surfaces with irregularities
25 kg, 10 kg
You can download the official Mapelastic Foundation technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Mapelastic Foundation in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapelastic Foundation you need, or describe the job and we will work it out with you.