Mapelastic Easy waterproofing pack
Mapei's own picture. The pack we stock: 24 kg.

Mapei WaterproofingNo. 20 / 47

Mapelastic Easy Technical Data Sheet (TDS)

Mapei waterproofing.

Mapelastic Easy is a two component acrylic modified cementitious waterproof coating, the straightforward member of the Mapelastic family and the one aimed at balconies, terraces and bathrooms. Cementitious membranes of this kind bond directly to concrete and screed and take tile adhesive over the top, so the waterproofing and the finish behave as one build up instead of two trades working past each other.

  • Waterproofing balconies and terraces
  • Bathrooms and internal wet areas
  • Cementitious substrates beneath tile adhesive
  • Trowel or roller applied waterproofing
  • Flexible coating over hairline cracked concrete
Data sheet0.6 MB

Build a list across products and send it once, or ask about Mapelastic Easy on WhatsApp now.

Consumption
3.8 kg/m² over 2 coats
Pack we stock
24 kg
Colour
light grey white

Mapei document 07559 · revision 2-2023

About Mapelastic Easy

Crack bridging is rated at no less than 0.75 mm to EN 14891, which covers the hairline movement a balcony slab develops rather than a structural joint. Powder and liquid mix at 3 parts A to 1 part B and go on by trowel or roller at about 1.9 kg per square metre for each millimetre of thickness, from a 24 kg kit. Dampen a hot absorbent UAE screed first so the mix is not robbed of its water.

Documentation

Related documentation

  • Technical data sheet

    Revision 2-2023 · 0.6 MB · PDF

    Mapelastic Easy as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats, 1 mm per coat

The sheet calls for 2 to 3.

As published in the data sheet

190kg

  • Trowel, brush or roller, 1 mm per coat: 1.9 kg/m2
  • 2 coats
  • over 50 m2

Order 8 packs of 24 kg kit, component A 18 kg bag plus component B 6 kg jerrycan

Send this quantity for a quote

Taken from the Mapelastic Easy data sheet: CONSUMPTION: Application by trowel or roller: Approx. 1.9 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The consumption figures are for a seamless film on a flat surface and are higher on uneven substrates, which the sheet does not quantify. The sheet prints no spray rate.

Application

Where it is used.

  1. 01Waterproofing balconies and terraces
  2. 02Bathrooms and internal wet areas
  3. 03Cementitious substrates beneath tile adhesive
  4. 04Trowel or roller applied waterproofing
  5. 05Flexible coating over hairline cracked concrete

Specification

Technical data.

  • EN 14891
Mapelastic Easy technical specifications from the manufacturer TDS
CoverageApplication by trowel or roller: Approx. 1.9 kg/m² per mm of thickness. N.B.: the consumption figures indicated are for a seamless film on a flat surface and are higher if applied on uneven substrates.
Pack size24 kg
Colourslight grey white
Mixing ratiocomponent A : component B = 3 : 1
Consistencypowder liquid
Storage and shelf lifeMapelastic Easy component A may be stored for up to 12 months when contained in its original sealed packaging in a dry place. Mapelastic Easy component B may be stored for up to 24 months. Store Mapelastic Easy in a dry place and at a temperature of at least +5°C.
Density1925 kg/m³
Crack bridgingat 23°C: EN 14891 - A8.2 ≥ 0.75 mm

Typical values as Mapei prints them in the data sheet for Mapelastic Easy. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

24 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 3 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

Mapelastic Easy component A may be stored for up to 12 months when contained in its original sealed packaging in a dry place. Mapelastic Easy component B may be stored for up to 24 months. Store Mapelastic Easy in a dry place and at a temperature of at least +5°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapelastic Easy, a waterproofing manufactured by Mapei. Allow 3.8 kg/m2 over 2 coats, as published by the manufacturer. Mix at component A : component B = 3 : 1. Supplied in 24 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapelastic Easy
ProductMapelastic Easy
ManufacturerMapei
TypeWaterproofing
Consumption3.8 kg/m2 over 2 coats
Pack size24 kg
Mixing ratiocomponent A : component B = 3 : 1
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Application by trowel or roller: Approx. 1.9 kg/m² per mm of thickness. N.B.: the consumption figures indicated are for a seamless film on a flat surface and are higher if applied on uneven substrates.

24 kg

You can download the official Mapelastic Easy technical data sheet as a PDF directly from this page, revision 2-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapelastic Easy in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapelastic Easy you need, or describe the job and we will work it out with you.

Chat on WhatsApp