
Mapei WaterproofingNo. 19 / 47
Mapelastic Aquadefense Zero Technical Data Sheet (TDS)
Waterproofing to EN 14891, waterproofing under tile.
Mapelastic AquaDefense Zero is the ready to use end of the Mapei waterproofing range: a one component, solvent free, light blue synthetic resin paste in water dispersion that needs no mixing and no second component. Two thin coats of approximately 0.4 mm each, the second laid perpendicular to the first once it has dried to a matt finish in about an hour, use 1 kg per square metre in total, where a two component cementitious such as Mapelastic Smart asks 1.6 kg per square metre for every millimetre of a 2 mm film.
- Waterproofing bathrooms and shower cubicles before tiling
- Laundry rooms, saunas and damp environments
- Balconies and terraces under ceramic, stone or mosaic
- Cementitious screeds, concrete and cementitious render
- Old ceramic tiles, terrazzo and stone material
- Plasterboard in interiors only
Build a list across products and send it once, or ask about Mapelastic Aquadefense Zero on WhatsApp now.
- Class
- EN 14891, waterproofing under tile
- Consumption
- 1 kg/m²
- Pack we stock
- 3.5 kg
- Colour
- light blue
Mapei document 14224 · revision 7-2026
About Mapelastic Aquadefense Zero
Tiles can be laid 4 hours after the second coat and the membrane takes light foot traffic after 3. Damp is what rules it out: the sheet forbids residual humidity above 3 percent or recurring rising damp, bars it as a crack cover, and requires it always to be covered with ceramic, mosaic or stone.
Documentation
Related documentation
Technical data sheet
Revision 7-2026 · 2.0 MB · PDF
Mapelastic Aquadefense Zero as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
50.0kg
- Roller, brush or trowel, two coats of approx. 0.4 mm: 1 kg/m2
- over 50 m2
Order 4 packs of 15 kg bucket, also 3.5 kg and 7.5 kg
Taken from the Mapelastic Aquadefense Zero data sheet: CONSUMPTION: 1 kg/m² for 2 coats. No site allowance is added unless you turn one on. The printed 1 kg/m2 is the total for the two coats the sheet requires, applied at approximately 0.4 mm each, so there is no single coat option and no coats control: one coat is not a permitted build up. Where Mapetex 50 is embedded as an anti fracture membrane the sheet says the final film is thicker and drying is slower, but it does not say by how much, so nothing is added here for it.
Application
Where it is used.
- 01Waterproofing bathrooms and shower cubicles before tiling
- 02Laundry rooms, saunas and damp environments
- 03Balconies and terraces under ceramic, stone or mosaic
- 04Cementitious screeds, concrete and cementitious render
- 05Old ceramic tiles, terrazzo and stone material
- 06Plasterboard in interiors only
Specification
Technical data.
- EN 14891, waterproofing under tile
- EN 14891
| Classification | EN 14891, waterproofing under tile |
|---|---|
| Coverage | 1 kg/m² for 2 coats |
| Pack size | 3.5 kg, 7.5 kg and 15 kg rectangular bucket |
| Set to light foot traffic | resistant to light pedestrian traffic after 3 hours |
| Colours | light blue |
| Bond strength | initial adhesion 1.7 N/mm² (EN 14891-A.6.2) |
| Water resistance | no penetration at 1500 kPa (EN 14891-A.7) |
| Application temperature | from +5°C to +35°C |
| Consistency | paste |
| Storage and shelf life | 24 months in its original packaging in a dry area. Protect from frost. |
| Thickness | approx. 0.4 mm per coat, two coats |
| Density | 1.30 g/cm³ |
| Ph | 9.5 |
| Solid content | 66 |
| Recoat time | approx. 60 minutes (when dry touch) |
| Covering time | 3 to 4 hours before application of the covering |
| Crack bridging | 3.2 mm at +23°C (EN 14891-A.8.2), 1.6 mm at -5°C (EN 14891-A.8.3) |
Typical values as Mapei prints them in the data sheet for Mapelastic Aquadefense Zero. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
3.5 kg, 7.5 kg and 15 kg rectangular bucket. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in its original packaging in a dry area. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapelastic Aquadefense Zero, a waterproofing manufactured by Mapei, classified EN 14891, waterproofing under tile. Allow 1 kg/m2, as published by the manufacturer. Applied thickness approx. 0.4 mm per coat, two coats. Supplied in 3.5 kg, 7.5 kg and 15 kg rectangular bucket. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapelastic Aquadefense Zero |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | EN 14891, waterproofing under tile |
| Consumption | 1 kg/m2 |
| Thickness | approx. 0.4 mm per coat, two coats |
| Pack size | 3.5 kg, 7.5 kg and 15 kg rectangular bucket |
| Set time | resistant to light pedestrian traffic after 3 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapelastic Aquadefense Zero is classified EN 14891, waterproofing under tile according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: 1 kg/m² for 2 coats
3.5 kg, 7.5 kg and 15 kg rectangular bucket
You can download the official Mapelastic Aquadefense Zero technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Mapelastic Aquadefense Zero in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapelastic Aquadefense Zero you need, or describe the job and we will work it out with you.