Mapeproof AL waterproofing pack
Mapei's own picture of Mapeproof AL.

Mapei WaterproofingNo. 27 / 47

Mapeproof AL Technical Data Sheet (TDS)

Waterproofing to CE EN 13967.

Mapeproof AL is a sheet membrane rather than a coating: a self adhesive HDPE waterproofing membrane that bonds fully to concrete cast against it, used to waterproof underground structures after the pour. The value of a fully bonded sheet below grade is that water cannot track sideways between membrane and concrete, so a puncture stays a local problem instead of wetting the whole wall.

  • Waterproofing underground structures after concrete pouring
  • Fully bonded below grade sheet waterproofing
  • Basement walls and slabs
  • Post applied waterproofing of buried concrete
  • Structures where lateral water migration must be prevented
Data sheet0.5 MB

Build a list across products and send it once, or ask about Mapeproof AL on WhatsApp now.

Class
CE EN 13967
Supplied
20 m roll, 1 m wide, lapped 7 cm
Pack we stock
1 x 20 m, 20 sqm

Mapei document 07540

About Mapeproof AL

Elongation above 500 per cent to ASTM D 412 gives it the give a buried structure needs, and it is CE marked to EN 13967. Rolls are 1 metre by 20 metres, covering 20 square metres each. Shelf life is 15 months stored between +10°C and +25°C, which is short enough that rolls should be ordered to programme rather than stacked in an uncooled UAE site store.

Documentation

Related documentation

  • Technical data sheet

    0.5 MB · PDF

    Mapeproof AL as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

m²

Rolls are 20 m long and 1 m wide, lapped 7 cm at every junction.

As published in the data sheet

53.8m

  • 1 m wide roll lapped 7 cm covers 0.93 m of width
  • over 50 m2

Order 3 packs of 20 m roll, 1 m wide, 20 m2

Send this quantity for a quote

Taken from the Mapeproof AL data sheet: PACKAGING: Mapeproof AL 1200 AP is available in 20 m2 rolls (width 1 m). Application of the product: apply Mapeproof AL 1200 AP, making sure there is an overlap at least 7 cm wide between adjacent sheets. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeproof AL 1200 AP is a pre applied composite membrane laid against the formwork or the blinding and cast against. What it publishes is the roll and the 7 cm lap, so the quantity here is the length of membrane the area needs once that lap is allowed for. Its weight of 1.1 kg/m2 is a property of the sheet and not a rate. On vertical work the sheet says to cut the membrane to the height of the surface, which can leave more offcut than this sum allows. The Mapeproof SA Primer at around 200 g/m2 and the Mapeproof AL Tape D10 AP that seals the laps are separate products with their own rates.

Application

Where it is used.

  1. 01Waterproofing underground structures after concrete pouring
  2. 02Fully bonded below grade sheet waterproofing
  3. 03Basement walls and slabs
  4. 04Post applied waterproofing of buried concrete
  5. 05Structures where lateral water migration must be prevented

Specification

Technical data.

  • CE EN 13967
  • EN 14891
Mapeproof AL technical specifications from the manufacturer TDS
ClassificationCE EN 13967
Pack size1 x 20 m, 20 sqm
Consistency/material: self-adhesive HDPE membrane
Storage and shelf lifeMapeproof AL 1200 AP may be stored for 15 months in its original packaging in a dry area at a temperature of +10°C to +25°C.
Weight1.1 kg/m²
Water absorption0.2%
Elongation> 500%
Tensile strength≥ 20 MPa

Typical values as Mapei prints them in the data sheet for Mapeproof AL. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 x 20 m, 20 sqm. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Mapeproof AL 1200 AP may be stored for 15 months in its original packaging in a dry area at a temperature of +10°C to +25°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapeproof AL, a waterproofing manufactured by Mapei, classified CE EN 13967. Allow 20 m roll, 1 m wide, lapped 7 cm, as published by the manufacturer. Supplied in 1 x 20 m, 20 sqm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapeproof AL
ProductMapeproof AL
ManufacturerMapei
TypeWaterproofing
ClassificationCE EN 13967
Supplied20 m roll, 1 m wide, lapped 7 cm
Pack size1 x 20 m, 20 sqm
Unit of measurementm2

Frequently Asked Questions

Mapeproof AL is classified CE EN 13967 according to EN 14891, as stated in the manufacturer's technical data sheet.

1 x 20 m, 20 sqm

You can download the official Mapeproof AL technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapeproof AL in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof AL you need, or describe the job and we will work it out with you.

Chat on WhatsApp