
Mapei AccessoryNo. 28 / 47
Mapeproof AL Tape D10 Technical Data Sheet (TDS)
Mapei accessory.
Pre applied waterproofing is laid before the concrete, which means every lap in it has to survive the rebar fixers, then disappear under the pour. Mapeproof AL Tape D10 is the double sided tape that closes those laps: a polyethylene cored tape roughly 0.9 mm thick and at least 0.9 kg/m², supplied in 0.1 m by 20 m rolls, four to a box, pressed down with a roller and bonding both to Mapeproof AL AP membrane and to Mapeproof Liquid Membrane.
- Jointing Mapeproof AL AP membrane sheets
- Sealing laps in pre applied below grade systems
- Repairing the Mapeproof AL AP membrane
- Strengthening membrane joints before concrete is poured
- Waterproofing underground structures
Build a list across products and send it once, or ask about Mapeproof AL Tape D10 on WhatsApp now.
- Supplied
- 20 m roll, 0.1 m wide, lapped 0 cm
- Pack we stock
- 4 x 20 m, 20 m
Mapei document 07538
About Mapeproof AL Tape D10
It is cold applied, so no torch and no flame on a membrane. It cannot go down on standing water or ice, and the window to cover it is 50 days, cut to 40 in hot weather, which is the figure that governs a UAE basement programme. Stored sealed at +10°C to +30°C it stays stable for 15 months.
Documentation
Related documentation
Technical data sheet
0.7 MB · PDF
Mapeproof AL Tape D10 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 20 m long, lapped 0 cm at each end.
As published in the data sheet
20.0m
- 20 m of detail
- plus 0 cm of lap at each roll end
Order 1 pack of 20 m roll, 0.1 m wide, 4 to a box
Taken from the Mapeproof AL Tape D10 data sheet: PACKAGING: Mapeproof AL Tape D10 AP is available in 0.1 m x 20 m rolls (box containing 4 rolls). Application of the product: unroll and cut the tape to the length required and place it over the area to be sealed. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeproof AL Tape D10 AP is a double sided adhesive tape that seals the laps and details of the Mapeproof AL bentonite system, so it is measured by the metre of lap. The sheet prints the roll and no lap between successive pieces of tape. Nothing is added here for a lap between successive pieces, because the sheet prints none: that is a bound the sheet does not print, so allow for it on site. Its weight is a property of the tape and not an ordering figure. The membrane it seals is a separate product with its own roll.
Application
Where it is used.
- 01Jointing Mapeproof AL AP membrane sheets
- 02Sealing laps in pre applied below grade systems
- 03Repairing the Mapeproof AL AP membrane
- 04Strengthening membrane joints before concrete is poured
- 05Waterproofing underground structures
Specification
Technical data.
| Pack size | 4 x 20 m, 20 m |
|---|---|
| Application temperature | 0°C to +40°C |
| Consistency | double-sided adhesive tape with a polyethylene core |
| Storage and shelf life | If stored in its original sealed container in a dry place at a temperature between +10°C and +30°C, Mapeproof AL Tape D10 AP remains stable for 15 months. |
| Weight | ≥ 0.9 kg/m² |
Typical values as Mapei prints them in the data sheet for Mapeproof AL Tape D10. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
4 x 20 m, 20 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
If stored in its original sealed container in a dry place at a temperature between +10°C and +30°C, Mapeproof AL Tape D10 AP remains stable for 15 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeproof AL Tape D10, a accessory manufactured by Mapei. Allow 20 m roll, 0.1 m wide, lapped 0 cm, as published by the manufacturer. Supplied in 4 x 20 m, 20 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeproof AL Tape D10 |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 20 m roll, 0.1 m wide, lapped 0 cm |
| Pack size | 4 x 20 m, 20 m |
| Unit of measurement | m2 |
Frequently Asked Questions
4 x 20 m, 20 m
You can download the official Mapeproof AL Tape D10 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeproof AL Tape D10 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof AL Tape D10 you need, or describe the job and we will work it out with you.