Silancolor Primer Plus primer pack
Mapei's own picture. The pack we stock: 10 kg.

Mapei PrimerNo. 47 / 47

Silancolor Primer Plus Technical Data Sheet (TDS)

Mapei primer.

Silancolor Primer Plus is the protective grade of the Silancolor primers, a siloxane based liquid formulated to resist mildew and mould. The difference tells on shaded, damp or poorly ventilated elevations, where spores colonise a primed surface and bloom through the finish within a season.

  • Priming facades before Silancolor finishes
  • Mildew and mould resistant surface preparation
  • Shaded or damp elevations
  • Evening out substrate absorption
  • Finishing coats for external thermal insulation systems
Data sheet1.7 MB

Build a list across products and send it once, or ask about Silancolor Primer Plus on WhatsApp now.

Consumption
0.1 to 0.15 kg/m²
Pack we stock
10 kg
Colour
milky white

Mapei document 02906

About Silancolor Primer Plus

Supplied ready to use as a milky fluid, it is applied by roller, brush or spray at 0.10 to 0.15 kg per square metre from 10 kg packs, between +5°C and +35°C, with other products following after 24 hours. Like the standard primer it evens out the suction of the substrate, so the coloured finish above dries uniformly. In the UAE it earns its place on shaded walls, plant room externals and anywhere condensation or irrigation spray keeps the render damp for part of the day.

Documentation

Related documentation

  • Technical data sheet

    1.7 MB · PDF

    Silancolor Primer Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 1 to 2.

As published in the data sheet

5.00 to 7.50kg

  • As printed, normal conditions: 0.1 to 0.15 kg/m2
  • 1 coat
  • over 50 m2

Order 1 pack of 10 kg drum

Send this quantity for a quote

Taken from the Silancolor Primer Plus data sheet: CONSUMPTION: in normal conditions, consumption rate is approx. 0.10-0.15 kg/m2. The sheet prints one range and no substrate table. No site allowance is added unless you turn one on. Ready to use. The sheet allows dilution with water up to 50 percent, which stretches the coverage of a drum but is not given a separate consumption figure. Also available in 2 kg drums.

Application

Where it is used.

  1. 01Priming facades before Silancolor finishes
  2. 02Mildew and mould resistant surface preparation
  3. 03Shaded or damp elevations
  4. 04Evening out substrate absorption
  5. 05Finishing coats for external thermal insulation systems

Specification

Technical data.

Silancolor Primer Plus technical specifications from the manufacturer TDS
Coverage(kg/m²): 0.10-0.15
Pack size10 kg
Coloursmilky white
Application temperaturefrom +5°C to +35°C
Storage and shelf life24 months if stored in a dry place and away from sources of heat, at a temperature between +5°C and +30°C. Protect from frost.
Densityapprox. 1.01 g/cm³

Typical values as Mapei prints them in the data sheet for Silancolor Primer Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

24 months if stored in a dry place and away from sources of heat, at a temperature between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Silancolor Primer Plus, a primer manufactured by Mapei. Allow 0.1 to 0.15 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Silancolor Primer Plus
ProductSilancolor Primer Plus
ManufacturerMapei
TypePrimer
Consumption0.1 to 0.15 kg/m2
Pack size10 kg
Unit of measurementm2

Frequently Asked Questions

As per the TDS: (kg/m²): 0.10-0.15

10 kg

You can download the official Silancolor Primer Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Silancolor Primer Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silancolor Primer Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp