
Mapei PrimerNo. 46 / 47
Silancolor Primer Technical Data Sheet (TDS)
Mapei primer.
Before a silicone resin facade paint goes on, the wall has to stop drinking unevenly, and Silancolor Primer is the product that settles it. A milky white, high penetration silicone resin primer in water dispersion, it consolidates the surface, evens out the absorption of the substrate and acts as a bonding promoter for Silancolor Paint above it.
- Priming cementitious surfaces before Silancolor Paint
- Evening out substrate absorption
- Consolidating the surfaces to be treated
- Preparation of substrates on facades
- Finishing coats for external thermal insulation systems
- Closed or poorly ventilated interiors
Build a list across products and send it once, or ask about Silancolor Primer on WhatsApp now.
- Consumption
- 0.1 to 0.15 kg/m²
- Pack we stock
- 10 kg
- Colour
- milky white
Mapei document 00545
About Silancolor Primer
Skip it and the finish coat dries at different rates across the elevation, which shows as shading that no second coat fully hides. Consumption is 0.10 to 0.15 kg per square metre depending on the porosity of the substrate, from 10 kg drums, applied between +5°C and +35°C. It is odourless and free of solvents, so it can be used in closed or poorly ventilated spaces, which is useful in a UAE stairwell, shaft or plant room.
Documentation
Related documentation
Technical data sheet
0.8 MB · PDF
Silancolor Primer as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
5.00 to 7.50kg
- As printed: 0.1 to 0.15 kg/m2
- 1 coat
- over 50 m2
Order 1 pack of 10 kg drum
Taken from the Silancolor Primer data sheet: CONSUMPTION: consumption is heavily influenced by the absorbency level of the substrate. In normal conditions, consumption rate is approx. 0.10 to 0.15 kg/m2. No site allowance is added unless you turn one on. Ready to use. The sheet allows dilution with water up to 50 percent, which stretches the coverage of a drum but is not given a separate consumption figure. The sheet prints a single range of 0.1 to 0.15 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Priming cementitious surfaces before Silancolor Paint
- 02Evening out substrate absorption
- 03Consolidating the surfaces to be treated
- 04Preparation of substrates on facades
- 05Finishing coats for external thermal insulation systems
- 06Closed or poorly ventilated interiors
Specification
Technical data.
| Coverage | (kg/m²): 0.10-0.15 |
|---|---|
| Pack size | 10 kg |
| Colours | milky white |
| Application temperature | +5°C to +35°C |
| Consistency | fluid liquid |
| Storage and shelf life | 24 months if stored in a dry place and away from sources of heat, at a temperature between +5°C and +30°C. Protect from frost. |
| Density | approx. 1.01 g/cm³ |
Typical values as Mapei prints them in the data sheet for Silancolor Primer. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months if stored in a dry place and away from sources of heat, at a temperature between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Silancolor Primer, a primer manufactured by Mapei. Allow 0.1 to 0.15 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Silancolor Primer |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.1 to 0.15 kg/m2 |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: (kg/m²): 0.10-0.15
10 kg
You can download the official Silancolor Primer technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Silancolor Primer in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silancolor Primer you need, or describe the job and we will work it out with you.

