
Mapei Surface TreatmentNo. 45 / 47
Silancolor Base Coat Technical Data Sheet (TDS)
Mapei surface treatment.
Silancolor Base Coat belongs to the protective coating end of this line rather than the membrane end. It is a coloured silicone resin base paint in water dispersion, loaded with micro granular quartz and selected aggregates, applied to cementitious surfaces to even out absorbency and give the Silancolor finish above it something consistent to bond to.
- Preparing cementitious surfaces before Silancolor finishes
- Evening out substrate absorbency
- Promoting bond for coloured finishes and dressing materials
- Covering small surface imperfections
- Base coat beneath scratch effect finishes
- Finishing coats for external thermal insulation systems
Build a list across products and send it once, or ask about Silancolor Base Coat on WhatsApp now.
- Consumption
- 0.3 to 0.5 kg/m²
- Pack we stock
- 20 kg
- Colour
- Base P, White
Mapei document 02070
About Silancolor Base Coat
On a facade that matters twice over: patchy suction reads as patchy colour, and a scratch effect finish laid over bare render lets the substrate show through. Tinted close to the final shade, it also helps bright colours cover. Consumption is 0.3 to 0.5 kg per square metre per coat, from 20 kg buckets, applied between +5°C and +35°C. On a UAE elevation work the shaded face, because a hot wall skins the coat before it can be laid off evenly.
Documentation
Related documentation
Technical data sheet
0.8 MB · PDF
Silancolor Base Coat as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
15.0 to 25.0kg
- Per coat: 0.3 to 0.5 kg/m2
- 1 coat
- over 50 m2
Order 1 to 2 packs of 20 kg plastic drum
Taken from the Silancolor Base Coat data sheet: CONSUMPTION: under normal conditions, consumption is generally 0.3-0.5 kg/m2 per coat. No site allowance is added unless you turn one on. Consumption is heavily influenced by the absorption and the roughness of the substrate and by surface imperfections. The sheet asks for a second coat only where the surface is particularly uneven, so one coat is its basis.
Application
Where it is used.
- 01Preparing cementitious surfaces before Silancolor finishes
- 02Evening out substrate absorbency
- 03Promoting bond for coloured finishes and dressing materials
- 04Covering small surface imperfections
- 05Base coat beneath scratch effect finishes
- 06Finishing coats for external thermal insulation systems
Specification
Technical data.
| Coverage | (kg/m²): 0.3-0.5 (per coat) |
|---|---|
| Pack size | 20 kg |
| Set to light foot traffic | at least 24 hours under normal humidity |
| Colours | Base P, White |
| Application temperature | from +5°C to +35°C |
| Consistency | pasty liquid |
| Storage and shelf life | 24 months if stored in a dry place, away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. |
| Density | approx. 1.58 g/cm³ |
| Dry solids | approx. 67 % |
Typical values as Mapei prints them in the data sheet for Silancolor Base Coat. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months if stored in a dry place, away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Silancolor Base Coat, a surface treatment manufactured by Mapei. Allow 0.3 to 0.5 kg/m2, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Silancolor Base Coat |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.3 to 0.5 kg/m2 |
| Pack size | 20 kg |
| Set time | at least 24 hours under normal humidity |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: (kg/m²): 0.3-0.5 (per coat)
20 kg
You can download the official Silancolor Base Coat technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Silancolor Base Coat in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silancolor Base Coat you need, or describe the job and we will work it out with you.

