Purtop Easy waterproofing pack
Mapei's own picture. The pack we stock: 15 kg.

Mapei WaterproofingNo. 44 / 47

Purtop Easy Technical Data Sheet (TDS)

Waterproofing to EN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR.

Purtop Easy is a one component aromatic polyurethane membrane, ready to use from the drum and laid by trowel or airless spray on roofs, terraces, balconies, walkways and green roofs. It needs no reinforcing fabric and no mixing rig, which is what separates it from the two component Purtop membranes in our range that have to be sprayed hot through a bi-mixer.

  • Waterproofing new roofs and repairs to existing roofs
  • Waterproofing terraces, balconies and walkways
  • Waterproofing pedestrian areas in general
  • Waterproofing green roofs
  • Overcoating old bituminous membranes, at least six months old and fully oxidised
  • Waterproofing over concrete, cementitious screeds, ceramics, fibre cement boards and metal, each with its own primer
Data sheet1.0 MB

Build a list across products and send it once, or ask about Purtop Easy on WhatsApp now.

Class
EN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR
Consumption
1.67 kg/m² per mm
Pack we stock
15 kg
Colour
White, grey, dark grey

Mapei document 07482 · revision 10-2025

About Purtop Easy

Two coats build a seamless film thicker than 1.2 mm at 2 kg per square metre; admixed with Purtop ADY the same 1.2 mm goes on in one coat. It bridges a 5 mm crack at +23 C, holds its mechanical properties to -40 C and resists root penetration. The sheet rules out permanently immersed surfaces, substrates above 4 percent residual moisture and bituminous membranes less than six months old.

Documentation

Related documentation

  • Technical data sheet

    Revision 10-2025 · 1.0 MB · PDF

    Purtop Easy as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Revision 2-2024 · 0.2 MB · PDF

    For the method statement and the site file.

    Download
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1.2 to 2 mm.

As published in the data sheet

100kg

  • 1.667 kg/m2 per mm
  • 1.2 mm thick
  • over 50 m2

Order 4 packs of 25 kg drum, also 15 kg

Send this quantity for a quote

Taken from the Purtop Easy data sheet: CONSUMPTION: 2 kg/m2 corresponds to approx. 1.2 mm dry thickness. 2 divided by 1.2 is the 1.667 kg/m2 per mm used here. No site allowance is added unless you turn one on. Thickness is the finished total thickness of the membrane, not the thickness of one coat: the sheet asks for at least two coats to a total higher than 1.2 mm, or a single 1.2 mm coat when the product is admixed with Purtop ADY, and both routes use the same material. The sheet prints a minimum of 1.2 mm and no maximum, so the 2 mm upper bound here is ours, not the manufacturer's. 1.2 mm is the default because it is the thickness every performance figure in the sheet was measured at. The sheet adds that the rate is for a seamless film on a flat surface and will be higher on uneven substrates, without saying by how much.

Application

Where it is used.

  1. 01Waterproofing new roofs and repairs to existing roofs
  2. 02Waterproofing terraces, balconies and walkways
  3. 03Waterproofing pedestrian areas in general
  4. 04Waterproofing green roofs
  5. 05Overcoating old bituminous membranes, at least six months old and fully oxidised
  6. 06Waterproofing over concrete, cementitious screeds, ceramics, fibre cement boards and metal, each with its own primer

Where it is not the right product

  • As a final exposed coat, because an aromatic polyurethane is not UV stable and needs a top coat

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR
  • EN 14891
Purtop Easy technical specifications from the manufacturer TDS
ClassificationEN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR
Coverage2 kg/m2 corresponds to approx. 1.2 mm dry thickness, for a seamless film on a flat surface
Pack size15 kg and 25 kg drums
Set to light foot trafficWaiting time between coats and put into service at +23 C and 50 % R.H.: 24 hours
ColoursWhite, grey, dark grey
Bond strength1.8 N/mm2 by pull off (EN 1542), mixed with Purtop ADY at 1.2 mm
Application temperature+5 C to +35 C. Substrate at least 3 C above the dew point and no more than 4 % residual moisture
ConsistencyThick liquid
Storage and shelf life12 months in the original packaging in a covered dry area at +15 C to +35 C
Density1.4 g/cm3
Dry solids82 %
ViscosityBrookfield 3,000 mPa.s (rotor 5 at 50 RPM)
ThicknessAt least two coats to a total thickness higher than 1.2 mm, or 1.2 mm in a single coat when admixed with Purtop ADY
Service temperature-40 C to +80 C
Elongation> 400 % at failure (ISO 37)
Tensile strength>= 2 N/mm2 (ISO 37), >= 4 N/mm2 with Purtop ADY
Tear strength> 15 N/mm (ISO 34-1)
HardnessShore A 50 (DIN 53505)
Crack bridgingClass A4 static and class B3.2 dynamic at +23 C (EN 1062-7), mixed with Purtop ADY at 1.2 mm. Crack bridging 5 mm at +23 C and 4 mm at -20 C (EN 14891)
Vapour resistanceClass I, average sD = 3 m (EN ISO 7783-2), mixed with Purtop ADY at 1.2 mm
Water absorptionAverage w = 0.01 kg/m2.h0.5 (EN 1062-3), mixed with Purtop ADY at 1.2 mm
Reaction to fireEuroclass E, flooring class DFL-s1 (EN 13501-1)
Root resistanceNo penetration (EN 13948)

Typical values as Mapei prints them in the data sheet for Purtop Easy. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

15 kg and 25 kg drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in the original packaging in a covered dry area at +15 C to +35 C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Purtop Easy, a waterproofing manufactured by Mapei, classified EN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR. Allow 1.67 kg/m2 per mm, as published by the manufacturer. Applied thickness At least two coats to a total thickness higher than 1.2 mm, or 1.2 mm in a single coat when admixed with Purtop ADY. Supplied in 15 kg and 25 kg drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Purtop Easy
ProductPurtop Easy
ManufacturerMapei
TypeWaterproofing
ClassificationEN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR
Consumption1.67 kg/m2 per mm
ThicknessAt least two coats to a total thickness higher than 1.2 mm, or 1.2 mm in a single coat when admixed with Purtop ADY
Pack size15 kg and 25 kg drums
Set timeWaiting time between coats and put into service at +23 C and 50 % R.H.: 24 hours
Unit of measurementm2

Frequently Asked Questions

Purtop Easy is classified EN 14891, EN 1504-2 coating (C) principles PI, MC, PR, RC and IR according to EN 14891, as stated in the manufacturer's technical data sheet.

As per the TDS: 2 kg/m2 corresponds to approx. 1.2 mm dry thickness, for a seamless film on a flat surface

15 kg and 25 kg drums

You can download the official Purtop Easy technical data sheet as a PDF directly from this page, revision 10-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Purtop Easy in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Purtop Easy you need, or describe the job and we will work it out with you.

Chat on WhatsApp