
Mapei WaterproofingNo. 43 / 47
Purtop 500 N Technical Data Sheet (TDS)
Waterproofing to EN 1504-2 coating (C), principles PI, MC, PR, RC and IR.
Purtop 500 N is a two component, solvent free hybrid polyurea sprayed through a heated high pressure bi-mixer at 160 to 200 bar with both components at +65 C to +85 C. It gels in about seven seconds, so it builds a seamless membrane on falls and upstands in one pass and needs no reinforcement, which separates it from Aquaflex Roof HR in our range, a roller applied membrane any applicator can lay.
- Waterproofing roof gardens and inverted roofs
- Waterproofing sheet metal roofs
- Waterproofing steps and stands in stadiums, with a suitable finishing product
- Waterproofing large roofs on new and existing structures
- Spray applied waterproofing over primed concrete and cementitious screeds, bituminous membranes, metal, wood and OSB panels
Build a list across products and send it once, or ask about Purtop 500 N on WhatsApp now.
- Class
- EN 1504-2 coating (C), principles PI, MC, PR, RC and IR
- Consumption
- 1.1 kg/m² per mm
- Pack we stock
- 225 kg
- Colour
- Component A grey, component B amber yellow
Mapei document 07505 · revision 10-2025
About Purtop 500 N
This one is applied by a trained spray applicator and quoted as a system, not supplied as drums to lay yourself: it needs the rig, a primer chosen for the substrate, and Mapecoat PU 20 N within 24 hours because it yellows under UV. It is sold in 450 kg kits. The sheet keeps it to roofs and forbids permanent immersion. Minimum thickness is 2 mm, 2.2 kg per square metre.
Documentation
Related documentation
Technical data sheet
Revision 10-2025 · 1.6 MB · PDF
Purtop 500 N as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 6-2024 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 5 mm.
As published in the data sheet
110kg
- 1.1 kg/m2 per mm
- 2 mm thick
- over 50 m2
Order 1 pack of 450 kg kit, component A 225 kg drum plus component B 225 kg drum
Taken from the Purtop 500 N data sheet: CONSUMPTION: The theoretical consumption for a smooth surface with a substrate temperature between +15 C and +25 C is 2.2 kg/m2 every 2.0 mm of thickness. The sheet quotes a total for 2.0 mm, halved here to give the rate per millimetre. No site allowance is added unless you turn one on. The sheet prints a minimum applied thickness of 2 mm and no maximum, so the upper bound is the calculator's, not the manufacturer's. At the 2 mm default the sum returns the sheet's own printed 2.2 kg/m2, and 2 mm is the thickness every performance figure on the sheet is measured at. The figure is theoretical and for a smooth surface: the sheet says consumption increases on rougher substrates and gives no figure for how much, so a site allowance belongs on top of this.
Application
Where it is used.
- 01Waterproofing roof gardens and inverted roofs
- 02Waterproofing sheet metal roofs
- 03Waterproofing steps and stands in stadiums, with a suitable finishing product
- 04Waterproofing large roofs on new and existing structures
- 05Spray applied waterproofing over primed concrete and cementitious screeds, bituminous membranes, metal, wood and OSB panels
Specification
Technical data.
- EN 1504-2 coating (C), principles PI, MC, PR, RC and IR
- EN 14891
| Classification | EN 1504-2 coating (C), principles PI, MC, PR, RC and IR |
|---|---|
| Coverage | 2.2 kg/m2 every 2.0 mm of thickness, theoretical, for a smooth surface with a substrate temperature between +15 C and +25 C |
| Pack size | Component A 225 kg metal drum, component B 225 kg metal drum |
| Set to light foot traffic | Gel time at +23 C approx. 7 seconds |
| Colours | Component A grey, component B amber yellow |
| Mixing ratio | A/B 100/100 by weight and 100/100 by volume |
| Bond strength | Direct traction adherence >= 3 N/mm2 (EN 1542) |
| Application temperature | Ambient from +5 C to +40 C. Component temperature +65 C to +85 C, pressure 160 to 200 bar |
| Consistency | Component A fluid, component B liquid |
| Storage and shelf life | 12 months in the original packaging in a dry covered area at +15 C to +25 C |
| Density | Component A 1.12 +/- 0.03 g/cm3, component B 1.11 +/- 0.03 g/cm3 |
| Viscosity | Brookfield at +23 C: component A 1,100 +/- 200 mPa.s, component B 975 +/- 175 mPa.s, rotor 3 at 50 RPM |
| Thickness | Applied in layers at least 2 mm thick |
| Tensile strength | > 15 N/mm2 (ISO 37), free film 2 mm after 7 days at +23 C |
| Elongation | > 400 % at failure (ISO 37) |
| Tear strength | > 65 N/mm (ISO 34-1) |
| Hardness | Shore A 90, Shore D 40 (DIN 53505) |
| Glass transition temperature | -50 C |
| Crack bridging | Class A5 static at -10 C, class B4.2 dynamic at +23 C (EN 1062-7) |
| Vapour resistance | Class I, average sD = 3.4 m (EN ISO 7783-2) |
| Water absorption | Average w = 0.003 kg/m2.h0.5 (EN 1062-3) |
| Reaction to fire | Euroclass E (EN 13501-1) |
Typical values as Mapei prints them in the data sheet for Purtop 500 N. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Component A 225 kg metal drum, component B 225 kg metal drum. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
A/B 100/100 by weight and 100/100 by volume. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in the original packaging in a dry covered area at +15 C to +25 C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Purtop 500 N, a waterproofing manufactured by Mapei, classified EN 1504-2 coating (C), principles PI, MC, PR, RC and IR. Allow 1.1 kg/m2 per mm, as published by the manufacturer. Applied thickness Applied in layers at least 2 mm thick. Mix at A/B 100/100 by weight and 100/100 by volume. Supplied in component a 225 kg metal drum, component b 225 kg metal drum. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Purtop 500 N |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | EN 1504-2 coating (C), principles PI, MC, PR, RC and IR |
| Consumption | 1.1 kg/m2 per mm |
| Thickness | Applied in layers at least 2 mm thick |
| Pack size | Component A 225 kg metal drum, component B 225 kg metal drum |
| Mixing ratio | A/B 100/100 by weight and 100/100 by volume |
| Set time | Gel time at +23 C approx. 7 seconds |
| Unit of measurement | m2 |
Frequently Asked Questions
Purtop 500 N is classified EN 1504-2 coating (C), principles PI, MC, PR, RC and IR according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: 2.2 kg/m2 every 2.0 mm of thickness, theoretical, for a smooth surface with a substrate temperature between +15 C and +25 C
Component A 225 kg metal drum, component B 225 kg metal drum
You can download the official Purtop 500 N technical data sheet as a PDF directly from this page, revision 10-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Purtop 500 N in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Purtop 500 N you need, or describe the job and we will work it out with you.