
Mapei Repair MortarNo. 18 / 53
Mapefinish Technical Data Sheet (TDS)
Mapei repair mortar.
Mapefinish HD is a two component, highly sulphate resistant cementitious mortar for protecting and levelling concrete that takes heavy abrasion. It is a skim rather than a rebuild: a maximum of 2 mm in a single layer and never more than 4 mm in total, so anything deeper belongs to the Mapegrout or Planitop ranges.
- Levelling defects on the surface of cast concrete
- Skimming concrete repaired with the Mapegrout range
- Protecting concrete against weak aggressive agents
- Protecting depuration systems and drain manifolds
- Repairing the wear layer on industrial concrete floors
Build a list across products and send it once, or ask about Mapefinish on WhatsApp now.
- Consumption
- 2.2 kg/m² per mm
- Pack we stock
- 30 kg
- Colour
- grey white
Mapei document 00486
About Mapefinish
The jobs it suits are levelling defects on cast concrete, skimming repairs made with Mapegrout mortars, protecting concrete against weak aggressive agents in the surrounding environment, lining treatment plants and drain manifolds, and renewing the wear layer on industrial floors. Components mix at 6.25 parts A to 1 part B with a pot life of around 30 minutes, applied between 5 and 35 degrees. Consumption is 2.2 kg per square metre per millimetre. On a hot UAE slab, damp the substrate first and work in small panels.
Documentation
Related documentation
Technical data sheet
2.3 MB · PDF
Mapefinish as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 2 mm.
As published in the data sheet
220kg
- 2.2 kg/m2 per mm
- 2 mm thick
- over 50 m2
Order 8 packs of 29 kg unit (A 25 kg bag plus B 4 kg tank)
Taken from the Mapefinish data sheet: CONSUMPTION: 2.2 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The sheet applies up to 2 mm per layer and says the total skimming thickness must never exceed 4 mm, so the default here is the maximum for one layer. The sheet prints no minimum, so the 1 mm lower bound is an input limit.
Application
Where it is used.
- 01Levelling defects on the surface of cast concrete
- 02Skimming concrete repaired with the Mapegrout range
- 03Protecting concrete against weak aggressive agents
- 04Protecting depuration systems and drain manifolds
- 05Repairing the wear layer on industrial concrete floors
Specification
Technical data.
- EN 1504
| Coverage | 2.2 kg/m² per mm of thickness. |
|---|---|
| Pack size | 30 kg |
| Pot life | approximately 30 minutes |
| Colours | grey white |
| Mixing ratio | 6.25 parts of Mapefinish HD component A with 1 part of component B |
| Application temperature | from +5°C to +35°C |
| Consistency | powder and liquid |
| Storage and shelf life | Mapefinish HD may be stored for up to 12 months in its original packaging in a dry place. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. Mapefinish HD component B may be stored for up to 24 months. Store both components at a temperature of at |
| Density | 1.3 - g/cm³ |
| Dry solids | 100 12 % |
Typical values as Mapei prints them in the data sheet for Mapefinish. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
30 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
6.25 parts of Mapefinish HD component A with 1 part of component B. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approximately 30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Mapefinish HD may be stored for up to 12 months in its original packaging in a dry place. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. Mapefinish HD component B may be stored for up to 24 months. Store both components at a temperature of at in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefinish, a repair mortar manufactured by Mapei. Allow 2.2 kg/m2 per mm, as published by the manufacturer. Mix at 6.25 parts of Mapefinish HD component A with 1 part of component B. Supplied in 30 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefinish |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Consumption | 2.2 kg/m2 per mm |
| Pack size | 30 kg |
| Mixing ratio | 6.25 parts of Mapefinish HD component A with 1 part of component B |
| Pot life | approximately 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 2.2 kg/m² per mm of thickness.
30 kg
You can download the official Mapefinish technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Mapefinish in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefinish you need, or describe the job and we will work it out with you.