
Mapei Precision GroutNo. 17 / 53
Mapefill SP ME Technical Data Sheet (TDS)
Precision Grout to EN 1504-6.
Precision anchoring is what Mapefill SP ME is for: a premium, super flow, non shrink cementitious grout to EN 1504-6, with expansion in the hardened phase measured to ASTM C878 and very high early strength. The difference against a general purpose grout is flow, 20 to 30 seconds to ASTM C939 at 21.5 per cent water, which is what lets it travel under a large plate or into a tight annulus without help.
- Precision anchoring of turbines, presses and generators
- Grouting machinery baseplates and crane rails
- Bridge bearings and column bases
- Anchoring bolts and other metallic fixtures
- Filling rigid joints between precast concrete elements
- Underpinning and pressure grouting of concrete structures
Build a list across products and send it once, or ask about Mapefill SP ME on WhatsApp now.
- Class
- EN 1504-6
- Consumption
- 1.92 kg of powder per litre of mixed grout
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 00478 · revision 11-2025
About Mapefill SP ME
It anchors turbines, presses, milling machines and generators, bolts and metallic fixtures, beds machinery baseplates, crane rails, bridge bearings and column bases, fills rigid joints between precast elements and serves underpinning and pressure grouting. For precast elements and rigid joints keep the thickness within 60 mm. Each 25 kg bag yields 13 to 14 litres, poured from one side in a continuous flow.
Documentation
Related documentation
Technical data sheet
Revision 11-2025 · 0.8 MB · PDF
Mapefill SP ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Measured depth of the void under the base plate.
As published in the data sheet
115kg
- 30 mm gap over 2 m2 is 60 litres to fill
- 1.92 kg of powder per litre of mixed grout
Order 5 packs of 25 kg bag
Taken from the Mapefill SP ME data sheet: CONSUMPTION: every 25 kg bag of Mapefill SP ME yields 13-14 litres of grout. A 25 kg bag over the lower 13 litre yield is 1.92 kg of powder per litre of grout. No site allowance is added unless you turn one on. The yield is printed as a range of 13 to 14 litres per bag. The lower yield is used so the bag count does not fall short; at 14 litres the figure is 1.79 kg per litre. The sheet says a thickness of 60 mm should not be exceeded for rigid joints, and to consult the manufacturer for cavities greater than 100 mm.
Application
Where it is used.
- 01Precision anchoring of turbines, presses and generators
- 02Grouting machinery baseplates and crane rails
- 03Bridge bearings and column bases
- 04Anchoring bolts and other metallic fixtures
- 05Filling rigid joints between precast concrete elements
- 06Underpinning and pressure grouting of concrete structures
Where it is not the right product
- Under dynamically loaded or vibrating machinery, where an epoxy grout is required
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 1504-6
- EN 1504 and ASTM C1107
| Classification | EN 1504-6 |
|---|---|
| Coverage | Every 25 kg bag of Mapefill SP ME yields 13-14 litres of grout. |
| Pack size | 25 kg |
| Colours | grey |
| Mixing ratio | 100 parts of Mapefill SP ME with 21.5% water |
| Consistency | Powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Mapefill SP ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. |
| Flexural strength | 21% water 16% water |
| Density | 2250 kg/m³ |
Typical values as Mapei prints them in the data sheet for Mapefill SP ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Mapefill SP ME with 21.5% water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
When stored in dry conditions in the original, unopened bags, Mapefill SP ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefill SP ME, a precision grout manufactured by Mapei, classified EN 1504-6. Allow 1.92 kg of powder per litre of mixed grout, as published by the manufacturer. Mix at 100 parts of Mapefill SP ME with 21.5% water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefill SP ME |
|---|---|
| Manufacturer | Mapei |
| Type | Precision Grout |
| Classification | EN 1504-6 |
| Consumption | 1.92 kg of powder per litre of mixed grout |
| Pack size | 25 kg |
| Mixing ratio | 100 parts of Mapefill SP ME with 21.5% water |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapefill SP ME is classified EN 1504-6 according to EN 1504 and ASTM C1107, as stated in the manufacturer's technical data sheet.
As per the TDS: Every 25 kg bag of Mapefill SP ME yields 13-14 litres of grout.
25 kg
You can download the official Mapefill SP ME technical data sheet as a PDF directly from this page, revision 11-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
Mapefill SP ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefill SP ME you need, or describe the job and we will work it out with you.

