Mapefill GP ME precision grout pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Precision GroutNo. 16 / 53

Mapefill GP ME Technical Data Sheet (TDS)

Precision Grout to EN 1504-6 CLASSIFIED AS.

Mapefill GP ME is a general purpose, non shrink cementitious grout classified to EN 1504-6, used to fill the gap between something fixed and the structure holding it. Non shrink is the whole point: an ordinary cement mix contracts as it cures and leaves the base plate it was meant to support bearing on nothing.

  • Grouting base plates and bridge bearings
  • Anchoring mechanical plant and machinery
  • Anchoring steel bolts and other metallic fixtures
  • Filling honeycombs and gaps in precast elements
  • Filling rigid joints between concrete elements
  • Underpinning and pressure grouting of concrete structures
Data sheet0.9 MB

Build a list across products and send it once, or ask about Mapefill GP ME on WhatsApp now.

Class
EN 1504-6 CLASSIFIED AS
Consumption
1.92 kg of powder per litre of mixed grout
Pack we stock
25 kg
Colour
grey

Mapei document 00479 · revision 3-2025

About Mapefill GP ME

It grouts honeycombing in concrete, fills gaps in precast elements, beds base plates and bridge bearings, anchors machinery, steel bolts and metallic fixtures, fills rigid joints and serves underpinning and pressure grouting. For precast elements and rigid joints the thickness should not exceed 60 mm. A flowable mix takes 3.8 to 3.9 kg of water per bag, giving a flow of under 60 seconds to ASTM C939, and each 25 kg bag yields 13 to 14 litres. Pour from one side only so air is driven ahead of the grout.

Documentation

Related documentation

  • Technical data sheet

    Revision 3-2025 · 0.9 MB · PDF

    Mapefill GP ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

Measured depth of the void under the base plate.

As published in the data sheet

115kg

  • 30 mm gap over 2 m2 is 60 litres to fill
  • 1.92 kg of powder per litre of mixed grout

Order 5 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapefill GP ME data sheet: CONSUMPTION: every 25 kg bag of Mapefill GP ME yields 13-14 litres of grout. A 25 kg bag over the lower 13 litre yield is 1.92 kg of powder per litre of grout. No site allowance is added unless you turn one on. The yield is printed as a range of 13 to 14 litres per bag. The lower yield is used so the bag count does not fall short; at 14 litres the figure is 1.79 kg per litre. The sheet prints no minimum or maximum gap, so the gap range offered is a working range and not a sheet figure.

Application

Where it is used.

  1. 01Grouting base plates and bridge bearings
  2. 02Anchoring mechanical plant and machinery
  3. 03Anchoring steel bolts and other metallic fixtures
  4. 04Filling honeycombs and gaps in precast elements
  5. 05Filling rigid joints between concrete elements
  6. 06Underpinning and pressure grouting of concrete structures

Where it is not the right product

  • Under dynamically loaded or vibrating machinery, where an epoxy grout is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 1504-6 CLASSIFIED AS
  • EN 1504 and ASTM C1107
Mapefill GP ME technical specifications from the manufacturer TDS
ClassificationEN 1504-6
CoverageEvery 25 kg bag of Mapefill GP ME yields 13-14 litres of grout.
Pack size25 kg
Coloursgrey
Mixing ratio100 parts in weight of Mapefill GP ME with 18 % of water
ConsistencyPowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapefill GP ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced.
Density2250 kg/m³

Typical values as Mapei prints them in the data sheet for Mapefill GP ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts in weight of Mapefill GP ME with 18 % of water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

When stored in dry conditions in the original, unopened bags, Mapefill GP ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefill GP ME, a precision grout manufactured by Mapei, classified EN 1504-6 CLASSIFIED AS. Allow 1.92 kg of powder per litre of mixed grout, as published by the manufacturer. Mix at 100 parts in weight of Mapefill GP ME with 18 % of water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefill GP ME
ProductMapefill GP ME
ManufacturerMapei
TypePrecision Grout
ClassificationEN 1504-6 CLASSIFIED AS
Consumption1.92 kg of powder per litre of mixed grout
Pack size25 kg
Mixing ratio100 parts in weight of Mapefill GP ME with 18 % of water
Unit of measurementm2

Frequently Asked Questions

Mapefill GP ME is classified EN 1504-6 CLASSIFIED AS according to EN 1504 and ASTM C1107, as stated in the manufacturer's technical data sheet.

As per the TDS: Every 25 kg bag of Mapefill GP ME yields 13-14 litres of grout.

25 kg

You can download the official Mapefill GP ME technical data sheet as a PDF directly from this page, revision 3-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefill GP ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefill GP ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp