
Mapei AccessoryNo. 15 / 53
Mapefibre NS 12 Technical Data Sheet (TDS)
Mapei accessory.
Mapefibre NS 12 are 12 mm monofilament polypropylene microfibres, 32 microns across, added at the mixer with the cement, aggregate, water and admixtures to improve the resistance of concrete to cracks caused by plastic shrinkage. The monofilament form is what lets them disperse and distribute through the mix.
- Concrete for industrial floors, airport forecourts and multi-storey car parks
- Precast reinforced concrete panels, pipes and concrete elements
- Production of fire-resistant concrete
- Reducing cracking caused by plastic shrinkage in poured concrete
- Improving the homogeneity of concrete during the pouring phase
Build a list across products and send it once, or ask about Mapefibre NS 12 on WhatsApp now.
- Dosage
- 0.6 kg per m3 of concrete
- Pack we stock
- 600 g
Mapei document 00751 · revision 06-2026
About Mapefibre NS 12
What decides whether they belong in a specification is printed on the sheet: Mapei states that the fibres offer no structural advantage and may not be considered an alternative to metal reinforcement, so they sit alongside a correct mix design and a proper curing regime rather than in place of either. They also improve fire resistance, durability and the homogeneity of concrete during pouring. The normal dosage is 600 g per cubic metre, which is one bag, and higher dosages are used for shotcrete and fire resistance.
Documentation
Related documentation
Technical data sheet
Revision 06-2026 · 1.0 MB · PDF
Mapefibre NS 12 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
600 g per cubic metre of concrete
As published in the data sheet
6.00kg
- 0.6 kg per cubic metre of concrete
- 10 m3 of concrete
Order 10 packs of 0.6 kg bag
Taken from the Mapefibre NS 12 data sheet: CONSUMPTION: the normal dosage of Mapefibre NS 12 is 600 g/m3, usually added to the concrete. No site allowance is added unless you turn one on. 600 g is 0.6 kg, which is exactly one of the sheet's own paper bags, and the bags are supplied in boxes of 30. The sheet says higher dosages can be used for special applications such as shotcrete or fire resistance but prints no figure for them, so only the normal dosage is carried here. It also says the fibres offer no advantage structurally and are not an alternative to metal reinforcement. Added in the mixer together with the cement, aggregates, water and admixtures.
Application
Where it is used.
- 01Concrete for industrial floors, airport forecourts and multi-storey car parks
- 02Precast reinforced concrete panels, pipes and concrete elements
- 03Production of fire-resistant concrete
- 04Reducing cracking caused by plastic shrinkage in poured concrete
- 05Improving the homogeneity of concrete during the pouring phase
Specification
Technical data.
| Pack size | 600 g bags, boxes of 30 degradable/pulpable paper bags |
|---|---|
| Storage and shelf life | 36 months in their sealed bags. Protect from direct sunlight and rain. |
| Dosage | 600 g/m³ of concrete, with higher dosages for special applications such as shotcrete or fire resistance |
| Fibre length | 12 mm |
| Diameter | 32 ± 1.6 µm |
| Density | 0.91 g/cm³ |
| Tensile strength | 400-500 N/mm² |
| Melting point | +160°C to +170°C |
| Flame point | +400°C |
| Water absorption | none |
| Chemical resistance | high resistance to alkalis, acids and salts |
Typical values as Mapei prints them in the data sheet for Mapefibre NS 12. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
600 g bags, boxes of 30 degradable/pulpable paper bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
36 months in their sealed bags. Protect from direct sunlight and rain. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefibre NS 12, a accessory manufactured by Mapei. Allow 0.6 kg per m3 of concrete, as published by the manufacturer. Supplied in 600 g bags, boxes of 30 degradable/pulpable paper bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefibre NS 12 |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Dosage | 0.6 kg per m3 of concrete |
| Pack size | 600 g bags, boxes of 30 degradable/pulpable paper bags |
| Unit of measurement | m2 |
Frequently Asked Questions
600 g bags, boxes of 30 degradable/pulpable paper bags
You can download the official Mapefibre NS 12 technical data sheet as a PDF directly from this page, revision 06-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
Mapefibre NS 12 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefibre NS 12 you need, or describe the job and we will work it out with you.