
Mapei AccessoryNo. 14 / 53
Mapefibre 6 mm Technical Data Sheet (TDS)
Mapei accessory.
Mapefibre 6 mm is loose 6 mm glass fibre dosed into a Mapei self levelling compound on site, one 250 g sachet per bag, stirred in at low speed until the mix is homogeneous and lump free. It is the way to reinforce a plain self leveller from the Ultraplan or Planitex ranges rather than buy a grade that already carries fibre, such as Ultraplan Fiber.
- All types of screeds, anhydrite or cementitious
- Prefabricated screeds and fibre cement or fibre gypsum panels
- Stable and solid raised floor systems
- Concrete substrates
- Wood based substrates and OSB
- Screeds and underfloor heating systems
Build a list across products and send it once, or ask about Mapefibre 6 mm on WhatsApp now.
- Dosage
- 0.25 kg per bag
- Pack we stock
- 250 g
Mapei document 00585
About Mapefibre 6 mm
The fibres are heat resistant, so they spread evenly through the mix without costing it fluidity, and they are alkali resistant, do not shrink and are not subject to corrosion, which is what lets them stay in a cementitious screed. They distribute through the full thickness of the layer and leave a uniform surface once cured. The sheet keeps them to cementitious or gypsum based self levellers, over anhydrite, concrete, raised floors, OSB and underfloor heating.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Mapefibre 6 mm as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
one 250 g sachet per bag of self levelling screed
As published in the data sheet
2.50kg
- 0.25 kg per bag
- 10 bags
Order 10 packs of 0.25 kg sachet
Taken from the Mapefibre 6 mm data sheet: CONSUMPTION: one 250 g sachet per bag of self levelling screed. No site allowance is added unless you turn one on. The sheet quotes grams and this calculator answers in kilogrammes, so its 250 g sachet reads here as 0.25 kg. The bag counted is the bag of self levelling compound the fibres go into, not a bag of fibre. Sachets are supplied in boxes of 33.
Application
Where it is used.
- 01All types of screeds, anhydrite or cementitious
- 02Prefabricated screeds and fibre cement or fibre gypsum panels
- 03Stable and solid raised floor systems
- 04Concrete substrates
- 05Wood based substrates and OSB
- 06Screeds and underfloor heating systems
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
| Pack size | Boxes of 33 sachets of 250 g each |
|---|---|
| Storage and shelf life | Unlimited if stored in the original packaging, sealed and kept in a cool, dry place |
| Fibre length | 6 mm |
| Material | Glass fibres |
| Dosage | One 250 g sachet per bag of self levelling screed |
| Durability | Alkali resistant, do not shrink and are not subject to corrosion |
Typical values as Mapei prints them in the data sheet for Mapefibre 6 mm. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Boxes of 33 sachets of 250 g each. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Unlimited if stored in the original packaging, sealed and kept in a cool, dry place in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefibre 6 mm, a accessory manufactured by Mapei. Allow 0.25 kg per bag, as published by the manufacturer. Supplied in boxes of 33 sachets of 250 g each. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefibre 6 mm |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Dosage | 0.25 kg per bag |
| Pack size | Boxes of 33 sachets of 250 g each |
| Unit of measurement | m2 |
Frequently Asked Questions
Boxes of 33 sachets of 250 g each
You can download the official Mapefibre 6 mm technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
Mapefibre 6 mm in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefibre 6 mm you need, or describe the job and we will work it out with you.