Mapefer repair mortar pack
Mapei's own picture. The pack we stock: 2 kg.

Mapei Repair MortarNo. 13 / 53

Mapefer Technical Data Sheet (TDS)

Repair Mortar to CE EN 1504-7.

Mapefer is not a repair mortar but the step before one: a two component anti-corrosion cementitious coating brushed onto exposed reinforcement once the failed concrete has been broken out. It restores alkalinity around the bar, protects the steel against further corrosion and acts as a bonding promoter for the repair mortar that follows, whether from the Mapegrout range or a cement mortar modified with synthetic resin latex.

  • Anti-rust protection of concrete reinforcement rods
  • Restoring alkalinity around corroded reinforcement
  • Bonding promoter for concrete repair mortars
  • Preparation before repair with Mapegrout mortars
  • Application above and below grade
Data sheet1.4 MB

Build a list across products and send it once, or ask about Mapefer on WhatsApp now.

Class
CE EN 1504-7
Pack we stock
2 kg
Colour
light blue

Mapei document 00301

About Mapefer

Skipping it is why repairs fail twice, because the rust that burst the cover off keeps working behind a cosmetically perfect patch. Components mix at 3 parts A to 1 part B into a light blue slurry with about an hour of pot life, applied between 5 and 35 degrees, above or below grade. At a 2 mm coat, allow 120 g per metre on 8 mm bar and 240 g per metre on 16 mm bar.

Documentation

Related documentation

  • Technical data sheet

    1.4 MB · PDF

    Mapefer as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet quotes 120 g per metre of Mapefer for 8 mm diameter rebar and 240 g per metre for 16 mm diameter rebar, both at a 2 mm thick coat. That is a rate per metre of reinforcement that scales with the bar diameter, and no model here holds a figure that varies by bar size, so forcing it into an area or a length calculator would produce a number the sheet never printed. Count the metres of exposed rebar, read the rate for the nearest bar diameter above, and order in 2 kg buckets (A plus B).

There is no area calculator for Mapefer because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Anti-rust protection of concrete reinforcement rods
  2. 02Restoring alkalinity around corroded reinforcement
  3. 03Bonding promoter for concrete repair mortars
  4. 04Preparation before repair with Mapegrout mortars
  5. 05Application above and below grade

Specification

Technical data.

  • CE EN 1504-7
  • EN 1504
Mapefer technical specifications from the manufacturer TDS
ClassificationCE EN 1504-7
Coverage120 g/m for 8 mm diameter rebar and 240 g/m for 16 mm diameter rebar at a 2 mm thick coat.
Pack size2 kg
Pot lifeapproximately 1 hour
Set to light foot trafficapproximately 2 hours
Colourslight blue
Mixing ratiocomponent A : component B = 3 : 1
Application temperaturefrom +5°C to +35°C
Consistencypowder and liquid
Storage and shelf lifeMapefer may be stored for up to 12 months in its original packaging in a dry place at a temperature of at least +5°C.
Ph9.5
Density1.02 g/cm³
Dry solids100 11 %

Typical values as Mapei prints them in the data sheet for Mapefer. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

2 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 3 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

approximately 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Mapefer may be stored for up to 12 months in its original packaging in a dry place at a temperature of at least +5°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefer, a repair mortar manufactured by Mapei, classified CE EN 1504-7. Mix at component A : component B = 3 : 1. Supplied in 2 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefer
ProductMapefer
ManufacturerMapei
TypeRepair Mortar
ClassificationCE EN 1504-7
Pack size2 kg
Mixing ratiocomponent A : component B = 3 : 1
Set timeapproximately 2 hours
Pot lifeapproximately 1 hour
Unit of measurementm2

Frequently Asked Questions

Mapefer is classified CE EN 1504-7 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: 120 g/m for 8 mm diameter rebar and 240 g/m for 16 mm diameter rebar at a 2 mm thick coat.

2 kg

You can download the official Mapefer technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefer in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefer you need, or describe the job and we will work it out with you.

Chat on WhatsApp