Mapefast HA bonding agent pack
Mapei's own picture. The pack we stock: 200 l.

Mapei Bonding AgentNo. 12 / 53

Mapefast HA Technical Data Sheet (TDS)

Bonding Agent to EN 934-2 Table 7, hardening accelerating admixture.

Mapefast HA is a liquid hardening accelerator for concrete and mortar, classified to EN 934-2 Table 7 and dosed at 0.8 to 4.0 per cent of the weight of the cement. It was developed for mixes carrying fly ash or slag, where early strength is the problem: the hydration heat is released sooner, so the pour reaches the strength it needs before stripping.

  • Concrete where high early strength or early stripping is required
  • Casting at lower ambient temperatures
  • Concretes and mortars containing fly ash
  • Blended cement mixes containing slag
  • Combined with Dynamon superplasticisers for workability
  • Combined with Mapeair entraining agents for frost resistant concrete
Data sheet0.4 MB

Build a list across products and send it once, or ask about Mapefast HA on WhatsApp now.

Class
EN 934-2 Table 7, hardening accelerating admixture
Dosage
0.8 to 4 kg per 100 kg of cement
Pack we stock
200 l
Colour
pale yellow

Mapei document 06846 · revision 9-2018

About Mapefast HA

It is not a plasticiser and the sheet is clear about that, since it leaves the slump, the air content and the workability retention alone, which is why it is combined with a Dynamon superplasticiser rather than used in place of one. It carries no chlorides that could start corrosion in the reinforcement. Add it with the mixing water; straight into a drum mixer it needs one minute of mixing per cubic metre and never less than five.

Documentation

Related documentation

  • Technical data sheet

    Revision 9-2018 · 0.4 MB · PDF

    Mapefast HA as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

kg

0.8 to 4.0 per cent by weight of cement

As published in the data sheet

8.00 to 40.0kg

  • 0.8 to 4 kg per 100 kg of cement
  • 1000 kg of cement
Send this quantity for a quote

Taken from the Mapefast HA data sheet: DOSAGE: normal dosage in concrete is between 0.8 and 4.0 % by weight of cement, which is 0.8 to 4.0 kg per 100 kg of cement. No site allowance is added unless you turn one on. The sheet quotes a percentage of the cement weight and this calculator carries it in the same units, because 1 per cent of the cement weight is 1 kg per 100 kg. The sheet says higher dosages will only slightly improve the early strength, and that the admixture is best added at the same time as, or together with, the mixing water. Supplied in 200 litre drums, 1000 litre IBCs and in bulk on request, which the sheet quotes by volume rather than by the weight dosed here, so no pack count is offered.

Application

Where it is used.

  1. 01Concrete where high early strength or early stripping is required
  2. 02Casting at lower ambient temperatures
  3. 03Concretes and mortars containing fly ash
  4. 04Blended cement mixes containing slag
  5. 05Combined with Dynamon superplasticisers for workability
  6. 06Combined with Mapeair entraining agents for frost resistant concrete

Specification

Technical data.

  • EN 934-2 Table 7, hardening accelerating admixture
Mapefast HA technical specifications from the manufacturer TDS
ClassificationEN 934-2 Table 7, hardening accelerating admixture
Pack size200 L drums, 1000 L IBCs and in bulk on request
Colourspale yellow
Consistencyliquid
Storage and shelf lifestore between +8°C and +35°C; properties retained for at least one year unopened in the original packaging
Dosage0.8 to 4.0 % by weight of cement
Density1.10 ± 0.03 g/cm3 at +25°C
Ph11 ± 1 (ISO 4316)
Viscosityeasy flowing, less than 30 mPa*s (Brookfield DV-1, LV1, 100 rpm at 20°C)
Chloridesless than 0.05 according to EN 934-2
Alkali contentless than 7.0 % equivalent Na2O

Typical values as Mapei prints them in the data sheet for Mapefast HA. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

200 L drums, 1000 L IBCs and in bulk on request. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

store between +8°C and +35°C; properties retained for at least one year unopened in the original packaging in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefast HA, a bonding agent manufactured by Mapei, classified EN 934-2 Table 7, hardening accelerating admixture. Allow 0.8 to 4 kg per 100 kg of cement, as published by the manufacturer. Supplied in 200 l drums, 1000 l ibcs and in bulk on request. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefast HA
ProductMapefast HA
ManufacturerMapei
TypeBonding Agent
ClassificationEN 934-2 Table 7, hardening accelerating admixture
Dosage0.8 to 4 kg per 100 kg of cement
Pack size200 L drums, 1000 L IBCs and in bulk on request
Unit of measurementm2

Frequently Asked Questions

Mapefast HA is classified EN 934-2 Table 7, hardening accelerating admixture according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

200 L drums, 1000 L IBCs and in bulk on request

You can download the official Mapefast HA technical data sheet as a PDF directly from this page, revision 9-2018, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefast HA in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefast HA you need, or describe the job and we will work it out with you.

Chat on WhatsApp