
Mapei Bonding AgentNo. 11 / 53
Mapeair LA/P Technical Data Sheet (TDS)
Mapei bonding agent.
Mapeair LA/P is a powdered foaming agent that entrains a high volume of air into a cement mix, which puts it among the admixtures rather than the repair or sealing products. Added at mixing, it produces lightweight mortar, lightweight concrete and flowable fill: the entrained air cuts density, removes the risk of segregation and gives a mix that stays fluid at a low water content and pumps easily.
- Lightweight mortar and lightweight concrete
- Flowable fill and filling ground cuts after pipe laying
- Mixes with pumice, expanded clay or polystyrene aggregate
- Super fluid mixes with a low modulus of elasticity
- Filling spaces in hollow wall masonry
- Inerting cavities
Build a list across products and send it once, or ask about Mapeair LA/P on WhatsApp now.
- Dosage
- 0.5 kg per m3 of concrete
- Pack we stock
- 0.5 kg
- Colour
- white
About Mapeair LA/P
Typical uses are mortar and concrete made with pumice, expanded clay or polystyrene aggregate for insulation value, super fluid mixes with a low modulus of elasticity, filling ground cuts after pipe laying, and inerting cavities. Average dosage is one 0.5 kg bag per cubic metre of mix. Store in closed containers away from frost and direct sunlight, which on a UAE site means out of the sun.
Documentation
Related documentation
Technical data sheet
0.7 MB · PDF
Mapeair LA/P as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
one 0.5 kg bag per cubic metre of mix
As published in the data sheet
5.00kg
- 0.5 kg per cubic metre of concrete
- 10 m3 of concrete
Order 10 packs of 0.5 kg bag
Taken from the Mapeair LA/P data sheet: CONSUMPTION, average dosage: 1 0.5 kg bag per cubic metre of mix. No site allowance is added unless you turn one on. The sheet prints one average dosage and no range. Its own example mixture for flowable fills lists 0.5 kg/m3 of Mapeair LA/P against 100 kg of cement, 150 to 180 kg of water and 1,400 kg of aggregate. The bags are water soluble and come in boxes of 30, so 30 bags is one box. For light weight concrete below 900 kg/m3 the sheet says the product has to be mixed in water and stirred through a mechanical foam generator, and that the foam volume produced varies with the dosage, the amount of water and the type of generator.
Application
Where it is used.
- 01Lightweight mortar and lightweight concrete
- 02Flowable fill and filling ground cuts after pipe laying
- 03Mixes with pumice, expanded clay or polystyrene aggregate
- 04Super fluid mixes with a low modulus of elasticity
- 05Filling spaces in hollow wall masonry
- 06Inerting cavities
Specification
Technical data.
| Coverage | Average dosage: 1 0.5 kg bag per cubic metre of mix. |
|---|---|
| Pack size | 0.5 kg |
| Colours | white |
| Consistency | powder |
| Storage and shelf life | Store in closed containers, protect from frost and exposure to direct sunlight. |
| Density | 0.8 g/cm³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Mapeair LA/P. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
0.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store in closed containers, protect from frost and exposure to direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeair LA/P, a bonding agent manufactured by Mapei. Allow 0.5 kg per m3 of concrete, as published by the manufacturer. Supplied in 0.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeair LA/P |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Dosage | 0.5 kg per m3 of concrete |
| Pack size | 0.5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Average dosage: 1 0.5 kg bag per cubic metre of mix.
0.5 kg
You can download the official Mapeair LA/P technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapeair LA/P in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeair LA/P you need, or describe the job and we will work it out with you.

