
Mapei Repair MortarNo. 20 / 53
Mapegrout Gunite 300 AF ME Technical Data Sheet (TDS)
Mapei repair mortar.
Sprayed, never trowelled: Mapegrout Gunite 300 AF ME is a prepacked one component fibre reinforced cementitious mortar with alkali free accelerated setting, and it can be placed solely with a dry mix spraying machine. The powder goes into the hopper dry and meets the water inside the nozzle, where it turns thixotropic and can be built up vertically or overhead at 10 to 15 cm per layer, with several coats above that.
- Repair of deteriorated concrete, stone and masonry by dry mix shotcrete
- Support to diggings in tunnels, foundations and outdoor shafts
- Repair of concrete lining in tunnels
- Lining of stone or masonry tunnels
- Repair of hydraulic works such as canals, shafts and basins
- Repair of industrial concrete structures
Build a list across products and send it once, or ask about Mapegrout Gunite 300 AF ME on WhatsApp now.
- Consumption
- 2 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 00462
About Mapegrout Gunite 300 AF ME
Hiring the right gear is part of the specification, since Mapei names the OCMER OCM-030 compact and OCM-045 as the pumps for it, and rebound of 5 to 12 per cent is why consumption is quoted at about 22 kg per square metre per centimetre once rebound is counted. Spray water on the surface for the first 24 hours; warm or windy weather cracks it.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Mapegrout Gunite 300 AF ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 150 mm.
As published in the data sheet
2,000kg
- 2 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 80 packs of 25 kg paper bag
Taken from the Mapegrout Gunite 300 AF ME data sheet: CONSUMPTION: approximately 20 kg/m2 per cm of thickness, approximately 22 kg/m2 per cm if considering 10% rebound. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Add ten percent for rebound on sprayed work, which is the 22 kg/m2 per cm figure the sheet also prints. Applied in thicknesses up to approximately 10 to 15 cm per layer; the sheet prints no minimum, so the 10 mm lower bound is an input limit.
Application
Where it is used.
- 01Repair of deteriorated concrete, stone and masonry by dry mix shotcrete
- 02Support to diggings in tunnels, foundations and outdoor shafts
- 03Repair of concrete lining in tunnels
- 04Lining of stone or masonry tunnels
- 05Repair of hydraulic works such as canals, shafts and basins
- 06Repair of industrial concrete structures
Specification
Technical data.
- EN 1504
| Coverage | Approximately 20 kg/m² per cm of thickness (approximately 22 kg/m² per cm of thickness if considering 10% rebound). |
|---|---|
| Pack size | 25 kg |
| Colours | grey |
| Application temperature | from +5°C to +35°C |
| Consistency | powder |
| Storage and shelf life | 12 months in a sheltered dry place. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. |
| Density | 1,250 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Mapegrout Gunite 300 AF ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in a sheltered dry place. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapegrout Gunite 300 AF ME, a repair mortar manufactured by Mapei. Allow 2 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapegrout Gunite 300 AF ME |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Consumption | 2 kg/m2 per mm |
| Pack size | 25 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Approximately 20 kg/m² per cm of thickness (approximately 22 kg/m² per cm of thickness if considering 10% rebound).
25 kg
You can download the official Mapegrout Gunite 300 AF ME technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Mapegrout Gunite 300 AF ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout Gunite 300 AF ME you need, or describe the job and we will work it out with you.