Mapegrout ME05 repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 21 / 53

Mapegrout ME05 Technical Data Sheet (TDS)

Repair Mortar to R4.

A poured repair rather than a hand applied one, Mapegrout ME05 is a high flow, shrinkage compensated micro concrete classified R4, placed in sections from 15 mm up to 220 mm. It is pumped or poured into formwork and finds its own way around dense reinforcement, which a trowelled mortar cannot do without leaving voids behind the bars.

  • Pile top treatment and re profiling
  • Column jacketing and structural reinstatement of beams
  • Honeycombed concrete and areas of congested reinforcement
  • Reinstatement of floor beams and slabs
  • Grouting of precast elements
  • Grouting machine baseplates, bridge bearings and crane rails
Data sheet2.2 MB

Build a list across products and send it once, or ask about Mapegrout ME05 on WhatsApp now.

Class
R4
Consumption
1.97 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 00497

About Mapegrout ME05

Typical work is pile top treatment and re profiling, column jacketing, structural reinstatement of beams and columns, honeycombed concrete, floor beams and slabs, and grouting of precast elements, machine and turbine baseplates, bridge bearings and crane rails. Mixing is 100 parts powder to 13 per cent water and each 25 kg bag yields 12.7 litres. Grout tight formwork and a continuous pour matter more here than anywhere else, because a cold joint inside a structural repair undoes the repair.

Documentation

Related documentation

  • Technical data sheet

    2.2 MB · PDF

    Mapegrout ME05 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 15 to 220 mm.

As published in the data sheet

1,970kg

  • 1.97 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 79 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapegrout ME05 data sheet: CONSUMPTION: 12.7 liters per 25 kg. No site allowance is added unless you turn one on. The sheet publishes a yield in litres of mortar per bag rather than a rate, so the rate here is 25 kg divided by 12.7 litres, which is 1.97 kg of powder per litre of mortar, and one square metre at one millimetre is one litre. Application thickness 15 to 220 mm.

Application

Where it is used.

  1. 01Pile top treatment and re profiling
  2. 02Column jacketing and structural reinstatement of beams
  3. 03Honeycombed concrete and areas of congested reinforcement
  4. 04Reinstatement of floor beams and slabs
  5. 05Grouting of precast elements
  6. 06Grouting machine baseplates, bridge bearings and crane rails

Specification

Technical data.

  • R4
  • EN 1504
Mapegrout ME05 technical specifications from the manufacturer TDS
Coverage12.7 liters per 25 kg.
Pack size25 kg
Coloursgrey
Mixing ratio100 parts by weight of Mapegrout ME05 with 13% water
ConsistencyPowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapegrout ME05 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced.
Density2200 kg/m³

Typical values as Mapei prints them in the data sheet for Mapegrout ME05. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts by weight of Mapegrout ME05 with 13% water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

When stored in dry conditions in the original, unopened bags, Mapegrout ME05 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout ME05, a repair mortar manufactured by Mapei, classified R4. Allow 1.97 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts by weight of Mapegrout ME05 with 13% water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout ME05
ProductMapegrout ME05
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption1.97 kg/m2 per mm
Pack size25 kg
Mixing ratio100 parts by weight of Mapegrout ME05 with 13% water
Unit of measurementm2

Frequently Asked Questions

Mapegrout ME05 is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: 12.7 liters per 25 kg.

25 kg

You can download the official Mapegrout ME05 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout ME05 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout ME05 you need, or describe the job and we will work it out with you.

Chat on WhatsApp