Mapegrout ME06 repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 22 / 53

Mapegrout ME06 Technical Data Sheet (TDS)

Repair Mortar to R4.

Mapegrout ME06 is a high strength, shrinkage compensated super flow micro concrete for structural repairs where the section is deep: gaps from 30 mm to 250 mm, poured into formwork without the aggregate segregating. The depth range is the deciding factor.

  • Structural reinstatement of reinforced concrete beams and pillars
  • Floor beams and slabs after scarification
  • Restoring industrial, road and airport concrete floors
  • Grouting machine baseplates and bridge bearings
  • Repair and reprofiling of pile tops
Data sheet2.1 MB

Build a list across products and send it once, or ask about Mapegrout ME06 on WhatsApp now.

Class
R4
Consumption
2.03 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 00485 · revision 1-2019

About Mapegrout ME06

Below 30 mm, or on a vertical face with no formwork, a thixotropic hand applied mortar is the right product; above it, only a flowing micro concrete fills the space reliably. It reinstates reinforced concrete beams and pillars, floor beams and slabs after scarifying, industrial, road and airport floors, and grouts machine baseplates, bridge bearings and pile tops. Each 25 kg bag takes 3.1 to 3.4 litres of water, with a pot life of about one hour at 23 degrees. Formwork must be grout tight and preferably water tested, with standing water removed before the pour.

Documentation

Related documentation

  • Technical data sheet

    Revision 1-2019 · 2.1 MB · PDF

    Mapegrout ME06 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 30 to 250 mm.

As published in the data sheet

3,045kg

  • 2.03 kg/m2 per mm
  • 30 mm thick
  • over 50 m2

Order 122 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapegrout ME06 data sheet: YIELD: 12.3 litres/25 kg. No site allowance is added unless you turn one on. The sheet publishes a yield in litres of mortar per bag rather than a rate, so the rate here is 25 kg divided by 12.3 litres, which is 2.03 kg of powder per litre of mortar, and one square metre at one millimetre is one litre. For gaps from 30 mm to 250 mm, so the default depth is the printed minimum.

Application

Where it is used.

  1. 01Structural reinstatement of reinforced concrete beams and pillars
  2. 02Floor beams and slabs after scarification
  3. 03Restoring industrial, road and airport concrete floors
  4. 04Grouting machine baseplates and bridge bearings
  5. 05Repair and reprofiling of pile tops

Specification

Technical data.

  • R4
  • EN 1504
Mapegrout ME06 technical specifications from the manufacturer TDS
Pack size25 kg
Pot lifeat +23°C and 50% R.H.: approximately 1 hour
Coloursgrey
Mixing ratioone 25 kg bag of Mapegrout ME06 with 3.1-3.4 litres of water
Application temperaturefrom +5°C to +50°C
Consistencypowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapegrout ME06 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced.
Ph12.5
Density1300 kg/m³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Mapegrout ME06. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

one 25 kg bag of Mapegrout ME06 with 3.1-3.4 litres of water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

at +23°C and 50% R.H.: approximately 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

When stored in dry conditions in the original, unopened bags, Mapegrout ME06 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout ME06, a repair mortar manufactured by Mapei, classified R4. Allow 2.03 kg/m2 per mm, as published by the manufacturer. Mix at one 25 kg bag of Mapegrout ME06 with 3.1-3.4 litres of water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout ME06
ProductMapegrout ME06
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption2.03 kg/m2 per mm
Pack size25 kg
Mixing ratioone 25 kg bag of Mapegrout ME06 with 3.1-3.4 litres of water
Pot lifeat +23°C and 50% R.H.: approximately 1 hour
Unit of measurementm2

Frequently Asked Questions

Mapegrout ME06 is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

25 kg

You can download the official Mapegrout ME06 technical data sheet as a PDF directly from this page, revision 1-2019, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout ME06 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout ME06 you need, or describe the job and we will work it out with you.

Chat on WhatsApp