Mapegrout PT ME precision grout pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Precision GroutNo. 23 / 53

Mapegrout PT ME Technical Data Sheet (TDS)

Precision Grout to EN 1504-3 CLASSIFIED AS R4.

Mapegrout PT ME is a sand free, super fluid cementitious injection grout, mixed thin enough to be pumped long distances without bleeding or segregating. Its purpose is corrosion protection inside post-tensioning cable ducts, filling them horizontally and vertically in new work and repair grouting voids and cavities in existing ones.

  • Filling post-tensioning cable ducts horizontally and vertically
  • Repair grouting of voids and cavities in cable ducts
  • Slurry for narrow cavities and cracks in rock or damaged concrete
  • Consolidating loose soil
  • Grout that must be pumped long distances without bleeding
Data sheet0.9 MB

Build a list across products and send it once, or ask about Mapegrout PT ME on WhatsApp now.

Class
EN 1504-3 CLASSIFIED AS R4
Pack we stock
25 kg
Colour
grey

Mapei document 01316 · revision 5-2025

About Mapegrout PT ME

Because there is no sand in it, it also serves as a slurry for narrow cavities and cracks in rock or damaged concrete and for consolidating loose soil. Minimum application thickness is 2 mm, which tells you the gaps it is meant for. Mixing is 100 parts powder to 34 per cent water, and a 25 kg bag yields roughly 16 to 17 litres of grout depending on the water added. This is a specialist pumped grout and no substitute for a repair mortar on an exposed concrete face.

Documentation

Related documentation

  • Technical data sheet

    Revision 5-2025 · 0.9 MB · PDF

    Mapegrout PT ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

Mapegrout PT ME is an injection grout for filling and repairing post tensioning ducts, so there is no area to calculate: a 25 kg bag yields approximately 16 to 17 litres of grout and the quantity is the volume of the ducts. The sheet says in terms not to use it for precision grouting, and names Mapefill SP ME for that instead.

There is no area calculator for Mapegrout PT ME because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Filling post-tensioning cable ducts horizontally and vertically
  2. 02Repair grouting of voids and cavities in cable ducts
  3. 03Slurry for narrow cavities and cracks in rock or damaged concrete
  4. 04Consolidating loose soil
  5. 05Grout that must be pumped long distances without bleeding

Where it is not the right product

  • Under dynamically loaded or vibrating machinery, where an epoxy grout is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 1504-3 CLASSIFIED AS R4
  • EN 1504 and ASTM C1107
Mapegrout PT ME technical specifications from the manufacturer TDS
ClassificationEN 1504-3, R4
Coverage25 kg bag of Mapegrout PT ME yields approximately 16-17 litres of grout (depending on water addition).
Pack size25 kg
Coloursgrey
Mixing ratio100 parts in weight of Mapegrout PT ME with 34% of water
ConsistencySand-free powder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapegrout PT ME has a shelf life of 12 months.
Density2010 kg/m³

Typical values as Mapei prints them in the data sheet for Mapegrout PT ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts in weight of Mapegrout PT ME with 34% of water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

When stored in dry conditions in the original, unopened bags, Mapegrout PT ME has a shelf life of 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout PT ME, a precision grout manufactured by Mapei, classified EN 1504-3 CLASSIFIED AS R4. Mix at 100 parts in weight of Mapegrout PT ME with 34% of water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout PT ME
ProductMapegrout PT ME
ManufacturerMapei
TypePrecision Grout
ClassificationEN 1504-3 CLASSIFIED AS R4
Pack size25 kg
Mixing ratio100 parts in weight of Mapegrout PT ME with 34% of water
Unit of measurementm2

Frequently Asked Questions

Mapegrout PT ME is classified EN 1504-3 CLASSIFIED AS R4 according to EN 1504 and ASTM C1107, as stated in the manufacturer's technical data sheet.

As per the TDS: 25 kg bag of Mapegrout PT ME yields approximately 16-17 litres of grout (depending on water addition).

25 kg

You can download the official Mapegrout PT ME technical data sheet as a PDF directly from this page, revision 5-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout PT ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout PT ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp