Mapegrout Rapido repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 24 / 53

Mapegrout Rapido Technical Data Sheet (TDS)

Repair Mortar to EN 1504-3 class R3, EN 1504-1 type PCC.

Mapegrout Rapido is the fast setting, shrinkage compensated, fibre reinforced thixotropic repair mortar we stock in 25 kg bags, and Mapei now prints it on document 307 under the title Mapegrout Fast-Set. Same product, same document number, and the safety sheet beside it is still headed Mapegrout Rapido.

  • Restoring deteriorated concrete structures, pillar edges, beams and balconies damaged by oxidation of the reinforcing rods
  • Fast repair of industrial concrete flooring
  • Sealing surface cracks in concrete and cement renders
  • Fast smoothing of surface defects in concrete pours, including aggregate bridging, shrinkage joints, formwork spacer holes and exposed rods
  • Assembly of concrete pipes and repair of their damaged edges
  • Pointing between bricks on structures to be waterproofed with Planiseal 88
Data sheet1.5 MB

Build a list across products and send it once, or ask about Mapegrout Rapido on WhatsApp now.

Class
EN 1504-3 class R3, EN 1504-1 type PCC
Consumption
1.8 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 00307 · revision 11-2022

About Mapegrout Rapido

It takes 18 kg per square metre for every centimetre of thickness and sets fast enough to be reworked within the hour, which is what separates it from Mapegrout T60 in our range, a normal setting mortar for work that can wait. Use it where a structure has to carry load again the same day: spalled columns, beam soffits and edges where the reinforcement is exposed and the section has to be rebuilt in layers.

Documentation

Related documentation

  • Technical data sheet

    Revision 11-2022 · 1.5 MB · PDF

    Mapegrout Rapido as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Revision 5-2021 · 0.2 MB · PDF

    For the method statement and the site file.

    Download
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 5 to 25 mm.

As published in the data sheet

1,800kg

  • 1.8 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 72 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapegrout Rapido data sheet: CONSUMPTION: 18 kg/m2 per cm of thickness. The sheet quotes per centimetre and the rate here is that divided by ten. No site allowance is added unless you turn one on. The sheet prints a maximum layer thickness of 20 to 25 mm and no minimum, so the bounds are yours, not the manufacturer's: the 5 mm lower bound is an input limit taken from the 5 mm surface roughness the sheet asks for on a prepared substrate. Deeper repairs are built up in several layers at intervals of approximately 15 minutes, each worked with a 10 mm notched trowel, so set the thickness to one layer and count the layers. The sheet also prints a mix of 100 kg of powder to 15.5 percent water at a density of 2150 kg/m3, which works out at 18.6 kg/m2 per cm, three percent above the 18 kg/m2 quoted here; the consumption figure is the one used. Add the bonding slurry separately, 1 part powder to 0.24 to 0.25 parts water.

Application

Where it is used.

  1. 01Restoring deteriorated concrete structures, pillar edges, beams and balconies damaged by oxidation of the reinforcing rods
  2. 02Fast repair of industrial concrete flooring
  3. 03Sealing surface cracks in concrete and cement renders
  4. 04Fast smoothing of surface defects in concrete pours, including aggregate bridging, shrinkage joints, formwork spacer holes and exposed rods
  5. 05Assembly of concrete pipes and repair of their damaged edges
  6. 06Pointing between bricks on structures to be waterproofed with Planiseal 88

Specification

Technical data.

  • EN 1504-3 class R3, EN 1504-1 type PCC
  • EN 1504
Mapegrout Rapido technical specifications from the manufacturer TDS
ClassificationEN 1504-3 class R3, EN 1504-1 type PCC
Coverage18 kg/m2 per cm of thickness
Pack size25 kg bags
Pot lifeapprox. 10 mins. (at +20°C)
Set to light foot trafficsetting time < 30 mins.; ready for use 2 to 3 hours
Coloursgrey
Mixing ratio100 kg of Mapegrout Fast-Set with 15-16 kg of water, which is 3.75-4 litres for a 25 kg bag; bonding slurry 1 part powder to 0.24-0.25 parts water
Bond strength> 1.5 MPa by pull-off (EN 1542)
Application temperatureenvironmental and substrate temperature from +5°C to +35°C
Consistencypowder; thixotropic when mixed
Storage and shelf life12 months in the original unopened packaging, stored dry and covered between +5°C and +35°C
Thicknessmaximum layer thickness 20-25 mm, deeper areas in several layers
Waiting timeapprox. 15 mins. between each layer
Densitydensity of mix 2150 kg/m³
Maximum aggregate size1 mm
Compressive strength> 10 MPa at 3 hours, > 20 MPa at 1 day, > 28 MPa at 7 days, > 40 MPa at 28 days (EN 12190)
Flexural strength> 4.0 MPa at 3 hours, > 4.5 MPa at 1 day, > 5.0 MPa at 7 days, > 8.0 MPa at 28 days (EN 196-1)
Modulus of elasticity24 GPa in compression (EN 13412)
Water absorptioncapillary absorption < 0.05 kg/m²·h0.5 (EN 13057)
Reaction to fireEuroclass A1 (EN 13501-1)

Typical values as Mapei prints them in the data sheet for Mapegrout Rapido. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 kg of Mapegrout Fast-Set with 15-16 kg of water, which is 3.75-4 litres for a 25 kg bag; bonding slurry 1 part powder to 0.24-0.25 parts water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

approx. 10 mins. (at +20°C). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in the original unopened packaging, stored dry and covered between +5°C and +35°C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout Rapido, a repair mortar manufactured by Mapei, classified EN 1504-3 class R3, EN 1504-1 type PCC. Allow 1.8 kg/m2 per mm, as published by the manufacturer. Applied thickness maximum layer thickness 20-25 mm, deeper areas in several layers. Mix at 100 kg of Mapegrout Fast-Set with 15-16 kg of water, which is 3.75-4 litres for a 25 kg bag; bonding slurry 1 part powder to 0.24-0.25 parts water. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout Rapido
ProductMapegrout Rapido
ManufacturerMapei
TypeRepair Mortar
ClassificationEN 1504-3 class R3, EN 1504-1 type PCC
Consumption1.8 kg/m2 per mm
Thicknessmaximum layer thickness 20-25 mm, deeper areas in several layers
Pack size25 kg bags
Mixing ratio100 kg of Mapegrout Fast-Set with 15-16 kg of water, which is 3.75-4 litres for a 25 kg bag; bonding slurry 1 part powder to 0.24-0.25 parts water
Set timesetting time < 30 mins.; ready for use 2 to 3 hours
Pot lifeapprox. 10 mins. (at +20°C)
Unit of measurementm2

Frequently Asked Questions

Mapegrout Rapido is classified EN 1504-3 class R3, EN 1504-1 type PCC according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: 18 kg/m2 per cm of thickness

25 kg bags

You can download the official Mapegrout Rapido technical data sheet as a PDF directly from this page, revision 11-2022, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout Rapido in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout Rapido you need, or describe the job and we will work it out with you.

Chat on WhatsApp