Mapegrout SV ME repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 25 / 53

Mapegrout SV ME Technical Data Sheet (TDS)

Repair Mortar to R4.

Mapegrout SV ME sits on the flowable side of the repair range: a fast setting, shrinkage compensated, easy flow mortar poured into formwork or a defined space in thicknesses up to 50 mm without segregating. Speed is the reason to choose it.

  • Badly damaged concrete needing a high flowing mortar
  • Industrial floors in warehouses and shopping centres
  • Concrete pavements and airport floors
  • Rapid fixing of inspection shafts and manholes
  • Fixing road signs, fencing and drain covers
  • Anchoring kerbstones and protection barriers
Data sheet2.1 MB

Build a list across products and send it once, or ask about Mapegrout SV ME on WhatsApp now.

Class
R4
Consumption
2.3 kg/m² per mm
Pack we stock
25 kg
Colour
Grey

Mapei document 01139 · revision 10-2024

About Mapegrout SV ME

Industrial floors, highways and airport works that have to be reopened to traffic quickly are its home ground, along with fixing inspection shafts, manholes, road signs, kerbstones, drain covers and concrete pylons. Pot life is 40 minutes at 23 degrees, and in a UAE summer it will be less, so batch only what can be placed, keep the water cool and never stretch a mix that has begun to stiffen. Consumption is 23 kg per square metre at 10 mm thickness, with each 25 kg bag yielding 12.25 litres. The working range is 5 to 40 degrees.

Documentation

Related documentation

  • Technical data sheet

    Revision 10-2024 · 2.1 MB · PDF

    Mapegrout SV ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 50 mm.

As published in the data sheet

2,300kg

  • 2.3 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 92 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapegrout SV ME data sheet: CONSUMPTION: 23 kg/m2 at 1 cm thickness. No site allowance is added unless you turn one on. The same sheet also prints a yield of 12.25 litres per 25 kg, which works out at 20.4 kg/m2 at 1 cm, eleven percent below the 23 kg/m2 consumption figure quoted here. The consumption figure is the higher of the two and most likely carries a site allowance. Thickness applied up to 50 mm; the sheet prints no minimum, so the 10 mm lower bound is an input limit.

Application

Where it is used.

  1. 01Badly damaged concrete needing a high flowing mortar
  2. 02Industrial floors in warehouses and shopping centres
  3. 03Concrete pavements and airport floors
  4. 04Rapid fixing of inspection shafts and manholes
  5. 05Fixing road signs, fencing and drain covers
  6. 06Anchoring kerbstones and protection barriers

Specification

Technical data.

  • R4
  • EN 1504
Mapegrout SV ME technical specifications from the manufacturer TDS
Coverage23 kg/m² at 1 cm thickness. Yield: 12.25 litres / 25 kg.
Pack size25 kg
Pot life40 min at +23°C
ColoursGrey
Mixing ratio100 parts of Mapegrout SV ME with 12-13 parts of water
Application temperaturefrom +5°C to +40°C
ConsistencyPowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapegrout SV ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced.
Density2300 kg/m³
Ph> 12

Typical values as Mapei prints them in the data sheet for Mapegrout SV ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts of Mapegrout SV ME with 12-13 parts of water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

40 min at +23°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

When stored in dry conditions in the original, unopened bags, Mapegrout SV ME has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout SV ME, a repair mortar manufactured by Mapei, classified R4. Allow 2.3 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts of Mapegrout SV ME with 12-13 parts of water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout SV ME
ProductMapegrout SV ME
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption2.3 kg/m2 per mm
Pack size25 kg
Mixing ratio100 parts of Mapegrout SV ME with 12-13 parts of water
Pot life40 min at +23°C
Unit of measurementm2

Frequently Asked Questions

Mapegrout SV ME is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: 23 kg/m² at 1 cm thickness. Yield: 12.25 litres / 25 kg.

25 kg

You can download the official Mapegrout SV ME technical data sheet as a PDF directly from this page, revision 10-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout SV ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout SV ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp