Mapegrout T60 ME repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 26 / 53

Mapegrout T60 ME Technical Data Sheet (TDS)

Repair Mortar to R4.

Mapegrout T60 ME is a thixotropic, fibre reinforced structural repair mortar classified R4 under EN 1504-3, applied to concrete that has already deteriorated rather than added to a fresh mix. Thixotropic means hand applied: it is trowelled or sprayed onto vertical surfaces in layers up to 60 mm thick and overhead in layers up to 30 mm, with no formwork, from a minimum of 10 mm.

  • Reinstating cover to corroded reinforcing steel
  • Repairs to manholes, sewerage structures and utilities
  • Water retaining structures, tunnels and canal linings
  • Industrial facilities including oil and gas and marine structures
  • Filling rigid joints between base and column
  • Repair of precast concrete elements
Data sheet1.9 MB

Build a list across products and send it once, or ask about Mapegrout T60 ME on WhatsApp now.

Class
R4
Consumption
1.98 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 01086 · revision 10-2015

About Mapegrout T60 ME

Where a section is deeper, or the reinforcement too congested for mortar to be worked in behind the bars, a flowable micro concrete poured into formwork is the correct answer instead. Sulphate and chloride resistance is why it suits marine structures, sewerage, tunnels and water retaining works, and the UAE coastal and groundwater conditions that drove the corrosion in the first place. Pot life is about an hour, applied between 5 and 50 degrees.

Documentation

Related documentation

  • Technical data sheet

    Revision 10-2015 · 1.9 MB · PDF

    Mapegrout T60 ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 60 mm.

As published in the data sheet

1,980kg

  • 1.98 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 80 packs of 25 kg bag

Send this quantity for a quote

Taken from the Mapegrout T60 ME data sheet: Yield: 12.6 litres / 25 kg. No site allowance is added unless you turn one on. The sheet publishes a yield in litres of mortar per bag rather than a rate, so the rate here is 25 kg divided by 12.6 litres, which is 1.98 kg of powder per litre of mortar, and one square metre at one millimetre is one litre. Applied at a minimum thickness of 10 mm up to 60 mm in a single layer.

Application

Where it is used.

  1. 01Reinstating cover to corroded reinforcing steel
  2. 02Repairs to manholes, sewerage structures and utilities
  3. 03Water retaining structures, tunnels and canal linings
  4. 04Industrial facilities including oil and gas and marine structures
  5. 05Filling rigid joints between base and column
  6. 06Repair of precast concrete elements

Specification

Technical data.

  • R4
  • EN 1504
Mapegrout T60 ME technical specifications from the manufacturer TDS
Pack size25 kg
Pot lifeca. 1 hour
Set to light foot trafficmax 1-2 hours
Coloursgrey
Application temperaturefrom +5°C to +50°C
Consistencypowder
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Mapegrout T60 ME has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced.
Ph> 12.5
Density1450 kg/m³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Mapegrout T60 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

ca. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

When stored in dry conditions in the original, unopened bags, Mapegrout T60 ME has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapegrout T60 ME, a repair mortar manufactured by Mapei, classified R4. Allow 1.98 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapegrout T60 ME
ProductMapegrout T60 ME
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption1.98 kg/m2 per mm
Pack size25 kg
Set timemax 1-2 hours
Pot lifeca. 1 hour
Unit of measurementm2

Frequently Asked Questions

Mapegrout T60 ME is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

25 kg

You can download the official Mapegrout T60 ME technical data sheet as a PDF directly from this page, revision 10-2015, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapegrout T60 ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout T60 ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp